The Best Water Cooling Radiator Single Bay

The new Alphacool AGB comes in three different models. You can either connect a Laing DDC, the Alphacool DC-LT or the Laing D5/Alphacool VPP655 at the backplate depending on the model which you use. The brushed plate provides an optical finishing touch which is underlined by the high quality processing. The front consists of a scretch-secure soft-touch surface painted in black-matt. The Eisfach is mounted in two of the front 5,25″ bays which provides a good overview of the container and the fill level is easily being checked through the lighted window at the back. Additionally, the Alphacool logo in the front can be lighted by connecting the 3-pin connector with a power source.

Model: 15249

The step towards perfection The new Alphacool AGB comes in three different models. You can either connect a Laing DDC, the Alphacool DC-LT or the Laing D5/Alphacool VPP655 at the backplate depending on the model which you use. The brushed plate provides an optical finishing touch which is underlined by the high quality processing. The front consists of a scretch-secure soft-touch surface painted in black-matt. The Eisfach is mounted in two of the front 5,25″ bays which provides a good overview of the container and the fill level is easily being checked through the lighted window at the back. Additionally, the Alphacool logo in the front can be lighted by connecting the 3-pin connector with a power source. A lot of details complement the first impression! Two 1/4″ holes at the top side are available for the first filling. To refill you can simply remove and extract the fillport in the front and two 1/4″ holes at the bottom side facilitate the draining of the liquid. There are two lighting modules at the right hand side at the back of the container behind the window for 5mm LEDs. This provides a unique opportunity for personalised lighting and optic. Further two holes at the left hand side provide additional opportunities to fill or drain the liquid. The last two 1/4″ threads are used to fill or drain the container. A Bubble Down module has been placed behind the inlet to prevent turbulences that could lead air into the watercircle. Technical data: material: plastic and metal color: black measurements (LxDxH): 148 x 132 x 84,5mm connector thread: 10x 1/4″ lighting: 2x 5mm LED Scope of delivery: 1x Alphacool Eisfach mounting material Please note: The container is being delivered without a pump. Please order one seperately or together with this on as a set! Download 3D-file (.stp)

The step towards perfection The new Alphacool AGB comes in three different models. You can either connect a Laing DDC, the Alphacool DC-LT or the Laing D5/Alphacool VPP655 at the backplate depending on the model which you use. The brushed plate provides an optical finishing touch which is underlined by the high quality processing. The front consists of a scretch-secure soft-touch surface painted in black-matt. The Eisfach is mounted in two of the front 5,25″ bays which provides a good overview of the container and the fill level is easily being checked through the lighted window at the back. Additionally, the Alphacool logo in the front can be lighted by connecting the 3-pin connector with a power source. A lot of details complement the first impression! Two 1/4″ holes at the top side are available for the first filling. To refill you can simply remove and extract the fillport in the front and two 1/4″ holes at the bottom side facilitate the draining of the liquid. There are two lighting modules at the right hand side at the back of the container behind the window for 5mm LEDs. This provides a unique opportunity for personalised lighting and optic. Further two holes at the left hand side provide additional opportunities to fill or drain the liquid. The last two 1/4″ threads are used to fill or drain the container. A Bubble Down module has been placed behind the inlet to prevent turbulences that could lead air into the watercircle. Technical data: material: plastic and metal color: black measurements (LxDxH): 148 x 118 x 84,5mm connector thread: 10x 1/4″ lighting: 2x 5mm LED Scope of delivery: 1x Alphacool Eisfach mounting material Please note: The container is being delivered without a pump. Please order one seperately or together with this on as a set! Download 3D-file (.stp)

The new Alphacool AGB comes in three different models. You can either connect a Laing DDC, the Alphacool DC-LT or the Laing D5/Alphacool VPP655 at the backplate depending on the model which you use. The brushed plate provides an optical finishing touch which is underlined by the high quality processing. The front consists of a scretch-secure soft-touch surface painted in black-matt. The Eisfach is mounted in two of the front 5,25″ bays which provides a good overview of the container and the fill level is easily being checked through the lighted window at the back. Additionally, the Alphacool logo in the front can be lighted by connecting the 3-pin connector with a power source. Two 1/4″ holes at the top side are available for the first filling. To refill you can simply remove and extract the fillport in the front and two 1/4″ holes at the bottom side facilitate the draining of the liquid. There are two lighting modules at the right hand side at the back of the container behind the window for 5mm LEDs. This provides a unique opportunity for personalised lighting and optic. Further two holes at the left hand side provide additional opportunities to fill or drain the liquid. The last two 1/4″ threads are used to fill or drain the container. A Bubble Down module has been placed behind the inlet to prevent turbulences that could lead air into the watercircle.

Model: 13287

Alphacool‘s high-class solution for integration of single VPP and TPP pumps into a cooling loop. Pump top and reservoir in one component offer many advantages: Easy mounting, compact dimensions and appealing looks! All this is combined and perfected in the new Alphacool Repack. But Alphacool would not be Alphacool if these new products would not feature innovations which were before not available in this configuration! Alphacool Repack – Single Laing D5 – Dual 5,25 Bay Station is for designed installation in the front of an enclosure. For mounting two vacant 5.25” drive bays are required.

Model: 15252

We’ve made our iconic H Series PC cases even better. Our new lineup still features the elements builders loved in the original H Series, including our patented cable management system, removable fan/radiator mounting brackets, and easy-to-use drive trays, alongside new updates like a front-panel USB-C connector supporting high-speed USB 3. 1 Gen 2 devices, a tempered glass side panel that installs with a single thumbscrew, and an upgraded Smart Device V2 on the H510i.

Radiator:
This aluminum radiator is designed to provide maximum cooling efficiency to prevent premature engine failure. Its light-weight, and high-heat transferring aluminum features a tube and fin design that, dramatically increases surface area that enables the heat to dissipate more efficiently. This Aluminum Radiator is at least 40% more efficient than stock ones. Most importantly, it has a much higher capacity for coolant than stock ones, which means that your cooling system will be more efficient and will be more resistant to temperature surges in racing applications.

Radiator Fan(s):
Just like other major components in the car, the radiator cannot work on its own. It has supporting parts that help it perform its function more efficiently. In order for the radiator to reduce temperature of the water and coolant mixture that goes through the engine, it needs airflow that absorbs the heat and assists evaporation. Radiator fans are used to draw the air towards the radiator and help in the cooling process.

High performance radiator fan may be used to replace your OE product for more efficient cooling. They allow more air to circulate around the radiator and they need less horsepower to operate too, making them ideal for your radiator fan replacement. Also, These Slim Fans have an ultra slim design so the fan can be installed easily against your radiator, in the most convenient position to allow for more leniencies for other aftermarket parts.

Package Included:

Play at your best with this VR-Ready gaming desktop computer geared with nvidia(r) geforce(r) RTX 2080 graphics, so you can crush the latest and most demanding games including Fortnite, PUBG, Overwatch, and Apex Legends. Experience powerful, fluid gaming with a 9th generation Intel(R) Core(TM) i7-9700k processor with liquid cooling. With an easy access angled design and support for aftermarket parts, it’s the ultimate DIY PC. Stand out from the competition with a sleek case and Tempered glass side panel that shows off your internal components with RGB lighting effects. A clear EMI protective coating helps reduce the risk of electrical or magnetic Interference with other devices. Enhance your gaming experience with the included OMEN Command center software, enabling remote gaming through OMEN game stream and prioritization of gaming Network traffic. Note: this PC Meets the minimum system requirements for Apex Legends if it can hit 3.8 GHz with overclocking.

EMCOOL 360 mm copper radiator, premium quality and performance for high-end liquid cooling systems. Independent bay design with five G1/4 threaded ports. This radiator can be installed with up to six 120 mm fans (3 fans per side). A liquid cooling system requires a heat exchanger to reject the absorbed heat and keep the fluid temperature within a desired range. EMCOOL radiators are applicable for a wide range of thermal loads in single or multi-component loops. Heat rejection is optimized through an array of high-quality copper fins and high-aspect-ratio tubes that have been engineered to provide a large heat transfer area with a low restriction for the highest efficiency. SPECIFICATIONS: – Dimensions: 400 mm (length) X 120 mm (width) X 45 mm (thickness) – Flow configuration: U-flow with multiple bleeding or mixing options (5 G1/4 threaded ports) – Fin material: Electrolytic copper (high-purity) – Surface finish: Matte black CONTENTS: – 1x EMCOOL 360 mm copper radiator – 3x Stop fittings (as seen in the pictures) – Screw set for case and fan installation 3-year limited warranty. A high-quality radiator like this will last for decades if properly used.

EMCOOL 240 mm copper radiator, premium quality and performance for high-end liquid cooling systems. Independent bay design with five G1/4 threaded ports. This radiator can be installed with up to four 120 mm fans (2 fans per side). A liquid cooling system requires a heat exchanger to reject the absorbed heat and keep the fluid temperature within a desired range. EMCOOL radiators are applicable for a wide range of thermal loads in single or multi-component loops. Heat rejection is optimized through an array of high-quality copper fins and high-aspect-ratio tubes that have been engineered to provide a large heat transfer area with a low restriction for the highest efficiency. SPECIFICATIONS: – Dimensions: 280 mm (length) X 120 mm (width) X 45 mm (thickness) – Flow configuration: U-flow with multiple bleeding or mixing options (5 G1/4 threaded ports) – Fin material: Electrolytic copper (high-purity) – Surface finish: Matte black CONTENTS: – 1x EMCOOL 280 mm copper radiator – 3x Stop fittings (as seen in the pictures) – Screw set for case and fan installation 3-year limited warranty. A high-quality radiator like this will last for decades if properly used.