Nowadays, there are so many products of water cooling bend kit in the market and you are wondering to choose a best one.You have searched for water cooling bend kit in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings water cooling bend kit which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
564 reviews analysed
1. Bykski Rigid Tubing 45/90/180 Degree Bending Kit – 16mm OD
Now making custom bends with rigid tubing could not be easier. With the Bykski Rigid Tubing 45/90/180 Degree Bending Kit – 16mm OD you can make consistent bends every time! Once your tube is heated (PETG or Acrylic) you can mold the tube using this bending tool for angles of any size. These tools have mount holes that allow you to mount to a hard surface for a more permanent work station.
WarningsPractice using the bending tool on some scrap rigid until you get the hang of how best to use it!
Tyler Direct is not responsible for any damage caused by or when using this product. Please use at your own risk.
2. Bewinner 16mm Tube Bending Kit, 3pcs 16mm OD 45/90 /180 Degree Acrylic Hard Rigid Tube Bender Mould Tool Kit,Suitable for Water Cooling System
- Hard tube / Acrylic tube bending tool set. ABS multi-angle acrylic elbow molds for AWGM3 series, each group with a total of three.
- Suitable for 16mm rigid tubes. 16mm supporting tube outer diameter, 16MM acrylic tube hot bending assisted angular positioning.
- 45/90/180 curvature. The set consists of elbow molds with different angles of 45, 90 and 180 degrees.
- High strength ABS material. The positioning groove is accurate in angle and the mold is polished with high gloss to ensure the best contact between the finished product and the mold.
- Need enough heat to bend (such as a heat gun).
Hard tube / Acrylic tube bending tool set. ABS multi-angle acrylic elbow molds for AWGM3 series, each group with a total of three. Suitable for 16mm rigid tubes. 16mm supporting tube outer diameter, 16MM acrylic tube hot bending assisted angular positioning. 45/90/180 curvature. The set consists of elbow molds with different angles of 45, 90 and 180 degrees. High strength ABS material. The positioning groove is accurate in angle and the mold is polished with high gloss to ensure the best contact between the finished product and the mold. Need enough heat to bend (such as a heat gun).
OD: 16mm / 0.63inch
Size: approx. 9.2 * 7.1 * 2.1cm / 3.62 * 2.8 * 0.83inch
3 * Rigid Tube Bender Mould
3. Alphacool Alphacool Eiskoffer Professional Bending & Measuring Kit
The Alphacool Eiskoffer is perhaps the most comprehensive collection of tools for bending 13mm or 16mm diameter HardTubes into nearly any form ever assembled. Inside the large, elegant, and sturdy case, each tool has its own separate place. All the tools are clearly arranged and neatly organised. The rubberised gloves ensure you always have a good grip on things, while also protecting you from splinters and dirt. The deburring tool is perfect for smoothing down HardTubes. Deburring is mandatory if you want the HardTubes to fit into their connectors properly. A long, sturdy saw and a mitre box serve to simplify cutting the HardTubes. The mitre box can be fastened to a table edge with special screw clamps, which are included. The inside of the mitre box is rubberised to prevent scratches and to keep the HardTubes from sliding around. The comprehensive set of measuring tools makes it easy to measure not just length, but also two or more angles at the same time. This tremendously simplifies the planning and execution of complicated bending sequences. In order to get the perfect bend each time, a substantial palette of bending radii and angles can be attached to the bending plate. The basis for this is formed by two different sizes of bending mandrels and arc mandrels. This allows you to bend HardTubes to any classic bending radius. The fitting stoppers can be used to simulate the depth of an Alphacool fitting on the end of the tube. This means an exact measurement and a perfect bend are always guaranteed when using Alphacool products. Alternatively, the straight mandrel with a stylus stopper can be used if you are using other products. The bending plate has a section that can accommodate self-designed or highly specialised bends. The case contains special flex mandrels that can be positioned in nearly any way. Model: 29131.
4. XSPC Easy Cut & Bend Toolkit for XSPC PETG Tubing
- Heavy Duty Hose Cutter – The heavy duty cutter can cut through PETG tubing as effortlessly as you would cut flexible PVC tubing. Easily cut PETG rigid tubing without the need for a saw.
- PETG Easy Bending Tool – This tool allows you to easily bend PETG tubing at an angle between 0 and 180 degrees. Just heat the tubing with the bending rubber inserted, insert the tube into the tool and bend it to the required radius. This simple tool takes the guess work and difficulty out of bending rigid tube. (Suitable for 12-14mm outer diameter tubing)
- Bending Rubber – Solid rubber extrusion for bending PETG tubing. Insert into the tube before bending, to stop the PETG tube kinking, or deforming. (Bending rubber diameter is 10mm)
- PETG Chamfer Tool – Quickly chamfer the edges of PETG tubing by using this handy tool. Just insert the tubing and turn anticlockwise.
- PETG Edging Sandpaper – Ideal for sanding the edges of PETG tubing, after using a chamfer tool.
XSPC PETG Tool Kit to bend and cut PETG tubing.Includes Heavy Duty Hose Cutter, PETG Easy Bending Tool, Bending Rubber, PETG Chamfer Tool, and PETG Edging Sandpaper.For use with XSPC branded PETG tubing.May not be compatible with other branded PETG products.
5. Thermaltake Pacific DIY LCS 1000mm Lengths V-Tubler PETG Hard Tubing (4-Pack) OD 16mm (5/8") x ID 12mm (1/2") CL-W116-PL16TR-A
Thermaltake introduces the V-Tubler PETG (4-Pack) hard tubing for custom PC water cooling configurations. Manufactured from premium PETG, the V-Tubler rigid tubing allows users to route the tubes runs exactly to their heart’s content. Designed with an 16mm OD / 12mm ID tube size, the PETG tube easily secures to 16mm fittings to give users better mounting, fitting, and flow. Make your pipe dreams a reality with endless possibilities to connect your vital components together for an unrivaled presentation.
Thermaltake introduces the V-Tubler PETG solid tubing for custom PC water cooling configurations. Manufactured from premium PETG, the V-Tubler rigid tubing allows users to route the tubes runs exactly to their heart’s content. Designed with 5/8” (16mm) OD PETG tube adapter fittings, give users better mounting, easier fitting, and ideal flow. Choose from: 500mm and 1000mm to make your system a showcase for all to see with the Thermaltake V-Tubler water tubing.
- Material: PETG
- Inside Diameter: 12 mm
- Outside Diameter: 16 mm (5/8”)
- Length: 100 cm *4
- Color: Transparent
6. Corsair Hydro X Series, XD5 RGB Pump/Reservoir Combo, RGB Lighting
- A high-performance xylem D5 PWM pump controlled via PWM TO deliver the perfect flow balance for your loop.
- Ten top-mounted RGB LEDs light up your reservoir with stunning customizable RGB lighting when combined with a Corsair lighting Node PRO or Commander Pro.
- The integrated 330Ml Reservoir puts your custom cooling system’s coolant on display, with stunning angular design and an integrated fillport that makes filling, flushing and topping-off coolant easy.
- Included temperature sensor provides real-time coolant temperatures from inside your cooling loop.
- Rubberized mounting system reduces pump vibrations and noise, so your custom cooling loop is seen, Not Heard.
The Corsair Hydro x series XD5 RGB pump/reservoir Combo is ready to drive the world’s most demanding custom cooling systems. A xylem D5 PWM pump provides powerful flow rate for multi-block loops and is adjustable via PWM to maximize cooling capacity or minimize noise. Ten built in RGB LEDs, controlled adding a Corsair lighting Node Pro or Commander Pro and powerful Corsair iCUE software, provide a vibrant splash of control to customize your lighting, while an included temperature sensor gives you real-time performance data from inside your system, for accurate cooling adjustment. Universally compatible with G1/4 fittings and with both 120mm and 140mm fan mounting brackets included, The XD5 RGB pump/reservoir is the heart of your custom cooling system. Tech Support # 1-888-222-4346 opt #1
7. Barrow ABS 16MM Hard Tube Bending Kit, Black
Barrow ABS 16MM Hard Tube Bending Kit, Black
8. Thermaltake Water 3.0 ARGB Motherboard Sync Edition Intel/AMD 240 All-in-One Liquid Cooling System 2X 120mm High Efficiency Radiator CPU Cooler CL-W233-PL12SW-A
- Digital/analog – customize pump and Fan lighting with as US aura, Gigabyte RGB FUSION, MSI Mystic Light Sync, ASROCK polychrome or through the included a RGB Controller Offering 7 light modes and 8 full light preset colors
- Ready to sync – equipped with an a RGB LED Ring on the pump and a RGB radiator fans, lighting effects can be synchronized with select as US, Gigabyte, MSI, and ASROCK 5V RGB header motherboards and controlled via motherboard RGB software
- Find your color – select from 16. 8 million colors, bringing the right atmosphere to any system theme
- High efficiency radiator – large surface radiator increases cooling and provides exceptional heat dissipation
- Performance water block – copper base plate accelerates the heat conductivity for water block and pump
- No refill required – reinforced-sleeved low evaporation tubing delivers the best durability and effectively decreases the loss of coolant
- Tube length – (360)400mm, (240)326mm, (120)326mm
- Compatible Sockets – Intel LGA 2066, 2011-3, 2011, 1150, 1151, 1155, 1156, 1366 and AMD AM4, AM3+, AM3, AM2+, AM2, FM2, FM1
- – 3 years
Thermaltake water 3. 0 240 ARGB sync Edition comes with two 120 mm fan with a large surface radiator, high Performance water block and pump for ultimate CPU cooling. The built-in pure ARGB fan features compression blades, hydraulic bearing, and 16. 8 million colors LEDs that is ready to sync with 5V RGB Capable motherboards from Asus, Gigabyte, MSI and as rock. Users can easily switch RGB lighting effects using the ARGB Controller that is included in the packet, or by ASUS aura Sync, gigabyte RGB FUSION, MSI Mystic Light Sync and as rock polychrome software. Water 3. 0 ARGB sync Edition series allows users to enjoy better cooling performance and greater CPU protection! Block compatibility Intel: LGA 2066/2011-3/2011/1366/1156/1155/1151/1150AMD: AM4/FM2/FM1/AM4/AM3+/AM3/AM2+/am2cpu Plate material: copper Pump motor speed: 3600 prorated voltage: 12 V & 5vPower input: 12V – 3. 9 W, 5V – 1. 06 Radiator Dimensions: 270 x 120 x 27mmRadiator material: aluminum Fan Dimension: 120mm x 120mm x 25mmFan RPM: PWR 500 1500 prorated voltage: 12 V & 5vPower input: 12V- 1. 44 W, 5V – 1. 6W (one fan)Fan Air flow: 56. 45 CFM fan noise: 25. 8 db. -alight modes: wave, full lighted, RGB spectrum, LED off, flow, ripple, Pulse, and blink Preset colors: red, yellow, green, teal, blue, White, Purple, and rainbow LED speed: 4 levels color: RGB color selector options with 16. 8 million colors Tube Dimension: 326mm (length)Tube material: rubberFeatures motherboard synchronization manual LED control with a RGB controller high performance copper base plate design accelerates heat conductivity supports up to (4) 120mm fans for push/pull configurations. custom designed 120mm large surface aluminum radiator High quality pump enables maximum water circulation and worry free maintenance includes universal mounting kit for multiple CPU socket configurations factory filled coolant requires no refill easy installation with maintenance-free operationPackage contents Thermaltake water 3. 0 a RGB sync 240mm radiator liquid CPU system(x2) 120mm pure a RGB sync fan w/ ARGB controller(x2) motherboard signal bridge Cable (ASUS, MSI, as rock and gigabyte)radiator and fan mounting screws (Corse/fine screws both included), quick start Guide
9. Bitspower Hard Tube Silicone Bending for 10mm ID Rigid Tubing
【Product characteristics/ specifications】bitspower dual/ single D5 top design with reservoir Bitspower Z – multi/ Z – Tube/ Z series only support vertical retention bracket Included RoHS Compliant.
10. Thermaltake Pacific DIY Liquid Cooling System CL480 64mm Thick Copper Radiator CL-W192-CU00BL-A
- More Rows for More Cooling: Built to perform, this 64mm thick radiator offers a triple-row flat tube design and brass tank for best thermal capacity
- High-Density Copper Fin Design: Designed to accommodate high air volume (Fin per Inch: 14)
- Stainless Steel Frame: Engineered with stainless steel side panels that increase the durability and strength of the radiator while reducing the weight
- Optimized Heat Transfer: Optimized for efficiently pulling heat away from cycling coolant thus achieving maximum heat dissipation at both low and high airflow operation
- High-Quality Manufacturing Process: Baked through a controlled atmosphere soldering line. Materials melt into each other to accomplish optimal thermal transfer from the tubes to the actual fins
Available in 480mm, 420mm and 360mm sizes, Thermaltake Pacific CL radiators are a high-performance copper radiator series with high-density copper fin design and brass tank. Built for 120mm/140mm high-static pressure fans, these radiators are manufactured from premium-quality materials to provide exceptional performance and unrivalled reliability. Constructed with stainless steel side panels guarantees the durability as well as reducing the weight of the radiator. Integrated G1/4″ threads make it easy to install, while rigid connections ensure leak-resistant measures are in place. With an ideal mounting, fitting and flow set-up, the Pacific CL Series meets your cooling needs in every way. 2 year warranty.
By our suggestions above, we hope that you can found Water Cooling Bend Kit for you.Please don’t forget to share your experience by comment in this post. Thank you!