The Best Temperature Controll Heating Cooling
We spent many hours on research to finding temperature controll heating cooling, reading product features, product specifications for this guide. For those of you who wish to the best temperature controll heating cooling, you should not miss this article. temperature controll heating cooling coming in a variety of types but also different price range. The following is the top 9 temperature controll heating cooling by our suggestions
772 reviews analysed
1. Inkbird Pre-Wired Digital Dual Stage Temperature Controller Outlet Thermostats 110V 1000W With 12" Stainless Probe Sensor DC Cord for Fermentation Kegerator ect
- 12inch Stainless Probe with 6.5ft DC cord
- Temperature calibration
- Dual relay output, be able to connect with refrigeration and heating equipment at the same time
- Heating/Cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change.
- Support reading with Centigrade or Fahrenheit unit
This temperature probe can be submersed into beer direclty during fermentation.
No need to worry about inserting a smaller probe into a separate thermowell temperature probe.
It’s compatible with INKBIRD’s following controllers:ITC-308,ITC-306T,ITC-310T.
Plug and play design,easy to use;
Dual relay output,be able to connect with refrigeration and heating equipment at the same time;
Support reading with Centigrade or Fahrenheit unit;
Maximum output load:1100W(110V);
Dual display window,be able to display measured temperature and set temperature at the same time;
Compressor delay protection for refrigeration control
High and low temperature alarms are available;
Temperature Control Range:-50~99°C/-58~210 °F
Temperature Control Mode:On/Off Control,Heating and Cooling
Temperature Control Output:Max.10A,100V ~240VAC
Input Power Cable Length:1.5m(5ft)
Output Power Cable Length:30cm(1ft)
Buzzer Alarm: High and Low Temperature Alarm
Over-temperature and sensor fault alarm
Measuring temperature range:-50℃~120℃
Sensor Type: NTC
Probe Material:Stainless steel
Probe Dimensions:6mmx300mm(0.24in x 12in)
Cord Length (excluding probe):2m (6.5ft)
1xITC308S temperature controller;
1xStainless Steel Probe DC Sensor
2. DIGITEN Digital Thermostat Outlet Controller Switch Simple-Stage Plug LCD Temperature Control Heating or Cooling
3. Poniie TC-15A Digital Temperature Controller 2-Stage Outlet Thermostat Heating & Cooling Mode for Greenhouse, Terrarium, Brewing and Fermentation (110V 15A)
- CONVENIENT DESIGN: Pre-wired plug and play design, easy to program, high accuracy waterproof sensor, support °C/°F display
- DUAL RELAY OUTPUT: Be able to connect with heating and cooling loads at the same time with control range (-40~210℉)
- DUAL DISPLAY WINDOW: Be able to display measured temperature and set centering temperature at the same time
- CALIBRATION & PROTECTION: Be able to calibrate temperature and set delay to protect your refrigerator from cycling too fast
- BUY WITH CONFIDENCE: 1-YEAR Warranty
- MAX. 1650W (110V)
- Over temperature & faulty sensor alarm, with power off memory
4. Inkbird ITC-1000 Dual Stage Digital Temperature Controller Fahrenheit ＆ Celsius Thermostat with Sensor for 3D Printer,Freezer,Fridge,Hatching ect (110 Volt)
Fahrenheit and Celsius Display Can Be Choose
Temperature Calibrating, Refrigerating control output delay protection
Control the Temperature by Setting the Temperature Set Value and the Difference Value
Alarm When Temperature Exceeds the Limit or When Sensor Error
2 Relays, Switch Between Cooling and Heating Modes
Output: 2 Relays
Temperature Measuring Range: -50～210 oF / -50 oC-99 oC
Resolution: 0.1 oF / 0.1 oC
Accuracy: ±1 oF（-50 oF -160 oF）/ ±1 oC（-50 oC -70 oC） Power Supply: 110VAC 50Hz/60Hz
Power Consumption: 3W
Sensor: NTC Sensor
Relay Contact Capacity: Cooling (10A/250VAC)/ Heating (10A/250VAC);
Ambient Temperature: 0 oC-60 oC
Storage Temperature: -30 oC-75 oC
Relative Humidity: 20-85% (No Condensate)
1x Temperature controller ITC 1000 110V
1x 7.87″ SENSOR
5. Ditra Heat Touchscreen Programmable Floor Heating Thermostat 120v/240v DITRA-HEAT-E-RT
Schluter-DITRA-HEAT-E-R is a programmable touchscreen thermostat used to control DITRA-HEAT-E-HK heating cables. 3.5” intuitive touchscreen display 6 programming periods per day Ability to track and log power consumption Set-up wizard QR code for quick access to system settings Supports 120 V and 240 V cables 5 mA built-in GFCI Floor temperature sensor included Sleek design WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
6. Wireless Programmable Thermostat Plug, Hycency Automatic Heating & Cooling Outlet Thermostat Wireless Temperature Controller Built in Temp Sensor with Remote Control LCD Display (1 Pcs)
- PROGRAMMABLE THERMOSTAT: Programming the thermostat via the remote control, control distance reaches 66ft in the open area. With heating and cooling mode, thermostat allows you to program at temperature range 32-158℉(0-70℃).
- SAVE MONEY: This thermostat will help make your home not only Comfortable but energy efficient. The thermostat can save energy costs on heating or cooling. It saves energy by adjusting the temperature.
- INSTALLATION: No installation or wiring, just plug thermostat into an outlet, plug your portable heating or cooling unit into the thermostat, and you’re ready to go. You can move thermostat plug to your desired position, convenient and flexible.
- EASY TO USE: Automatic matching remote control and thermostat plug. select the heating or cooling mode via the remote control and set the target temperature. Accurate temperature control of ±1℃ for consistent comfort. Choice of ℉ or ℃ temperature display on LCD.
- SAFE AND RELIABLE: 3-Prong thermostat plug with grounded terminal, recoverable overload short circuit and maximum load current up to 15A. Suitable for attic fan, swamp cooler, evaporative cooler, space heater, wall panel heater, electric fireplace heater.
7. Inkbird ITC-308 Max.1200W Heater, Cool Device Temperature Controller, Carboy, Homebrew, Fermenter, Greenhouse Terrarium Temp. Control
- [Convenient Design] Plug and play design, easy to use. Support °C/°F display.
- [Dual Relay Output] Be able to connect with refrigeration and heating equipment at the same time.
- [Dual Display Window] Be able to display measured temperature and set temperature at the same time.
- [Buzzer Alarm] High and low temperature alarms are available when the temperature is over or the sensor is with issue.
- [Warranty & Safe] Warranty: 1 year. Maximum output load: 1100W(110V). It is with temperature calibration and compressor delay which can protect your refrigeration.
Temperature Control Range: -50~99°C / -58~210°F
Temperature Resolution: 0.1°C / 0.1°F Temperature Accuracy: ±1°C (-50~70°C) / ±1°F (-50~160°F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V~240V AC
Buzzer Alarm: High and Low Temperature Alarm
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Body Dimension: 140x68x33mm (5.5×2.7×1.3inch)
Socket Dimension: 85x42x24mm (3.3×1.7x1inch)
Ambient Temperature: -30~75°C / -22~167°F
Storage Temperature: -20~60°C / -4~140°F
Humidity: 20~85% (No Condensate)
Warranty: 1 Year
1x ITC-308 Temperature Controller
8. Nuheat Home Programmable Dual-Voltage Thermostat with Touchscreen, Floor Heating Abilities
- HOME THERMOSTAT – A high resolution 3.5″ color touchscreen thermostat that allows easy control and programming of any electric floor heating system.Home Touchscreen Programmable Dual-Voltage Thermostat – Available FALL 2014
- PROGRAMMABLE THERMOSTAT – 7-day programmable electric floor heating thermostat gives you the flexibility to program around your own schedule while reducing energy consumption costs.Energy usage monitor
- MONITOR ENERGY CONSUMPTION – Understand how much energy you’re consuming with your floor heating system.
- DUAL VOLTAGE – The HOME thermostat features dual voltage compatibility (120V &
- 240V), a physical on/off switch, and has built-in Class A GFCI (Ground Fault Circuit Interrupter) protection. The GFCI protects against risks of electrocution caused by a current leakage.
- INTUITIVE NAVIGATION – Easy to use set up wizard to guide you through the basic setup process. Suitable to control floor heating for tile and stone floors with temperature limiting feature for laminate and engineered wood floors.
9. Lux Products TX9600TS Programmable Large Touchscreen Heating Cooling Thermostat, White
- Universal compatibility for all system types. Large, lighted easy-to-read touchscreen display. It is compatible with virtually all North American heating and cooling systems apart from systems with electric baseboard heat (120 or 240 volt) and systems with 2-cooling stages
- Biggest size display, Easy-to-use touchscreen menu operation.
- User-selectable periods per day (2 or 4), Programmable touch pad lockout for unauthorized users
- Adjustable heat/cool set temperature limit stops, Energy usage monitor. Refer user manual below
- Programmable air filter life timer, Temporary temperature override, Adjustable temperature differential (swing).
About the lux TX9600TS Thermostat, 7 day digital programmable universal touch screen The lux TX9600TS Thermostat, 7 day digital programmable universal touch screen is simple and easy to understand making it extremely user friendly. This thermostat provides you with complete and accurate temperature control with just a simple touch of your finger. The lux TX9600TS features a large digital lighted display that makes the touch screen easy to read and program (7 day programming available). The lux TX9600TS Thermostat, 7 day digital programmable universal touch screen is designed for use with most 24 volt heating and A/C systems, two stage heat/ one stage cool (gas, oil, Electric, or single stage heat pump systems, two wire heat only hydronic systems (hot water baseboard & Radiator) and millivolt systems (wall heaters, furnaces & Gas fireplaces). The lux TX9600TS is not designed for use with electric baseboard heat (120\240 volt) and systems with 2-cooling stages.
By our suggestions above, we hope that you can found Temperature Controll Heating Cooling for you.Please don’t forget to share your experience by comment in this post. Thank you!