584 reviews analysed
![Wireless Charging Compatible Phone Metal Plate, eSamcore Phone Magnet Sticker for Magnetic Car Phone Mount Holder & Cradle & Stand for [Vent] [CD] [Windshield] [Dashboard] 1.7 X 1.7 Inch [2-Pack]](https://images-na.ssl-images-amazon.com/images/I/81h2wbUpnBL._AC_SL300_.jpg)
1. Lots Off 3 Pack of 3.15" (80mm) Adhesive Mounting Disk for Car Dashboards GPS Smartphone Dashboard Disc(Compatible with Garmin Nuvi Magellan GPS & iPhone Smartphone Mount)
Feature
- Scope of application: Suction cup bracket for GPS navigator, driving recorder and early warning instrument
- Product material: main body ABS, back glue is 3M PE FOAM, disc diameter is 80mm, 3M adhesive diameter is 69mm, thickness: 3.99mm.
- The center console base has good initial tack and holding viscosity, good stability, and good adhesion to plastic, rubber and rough surfaces.
- Good adhesion at high and low temperatures, high temperature +80 ° C to low temperature -20 ° C does not affect the use of the product
- The product is upgraded, and a protective film is added to prevent the disc from being scratched
- after the disc is pasted with a protective film on the back, each is packed in a PE bag.
Description
Tips:
1.The bonding surface should be kept absolutely clean and dry. It can be scrubbed with alcohol or acetone. The surface after cleaning can be completely evaporated after the solvent is completely evaporated. It can also be baked with a baking gun or a hair drye.
2.Hard to avoid contact between the finger and the rubber surface during the operation. After pressing, press hard to ensure sufficient contact and wetting of the rubber surface.
2. Randconcept – 95mm 3M VHB Adhesive Dashboard Pad Mounting Disk for Suction Cup Phone Mount & Garmin GPS Suction Mount | 3.74" Wide Diameter 2 Pcs
Feature
- ✅ WIDE COMPATIBILITY: Adhesive mounting disk fits any suction cup style or accessories mounting within 90mm in diameter suction cup for adhering to dashboards in the market. Our sticky disc is flexible option for carmount sticky pad replacement!
- ✅ MOUNTING WITH SMOOTH & FLAT SURFACE: Thanks for PVC plate and 3M VBH adhesive, upper part PVC plate provides smooth and flat surface while bottom Sticky 3M PE foam adhesive fixed dashboard textured surface!
- ✅NO MORE ADHESIVE SEPARATED: The bottom grey color PE foam adhesive is enhanced version comparing with white adhesive in the market. It performs well even in hot and cold weather or climates.
- ✅ SAFE JOURNEY: After suction cup firmly attached with our sticky pad, you can enjoy navigation with smartphone or garmin GPS devices even camera securely on dashboard. No more dropping phone holders or garmin accessories for gps during driving.
- ✅ 100% RISK-FREE PURCHASE: At Randconcept we know our customers want nothing but the finest which is exactly what we offer. From using the highest quality materials to using state of the art adhsive disc, we take all the right steps to make sure you get the finest. We’re so confident that you’ll love our sticky pads that we offer a 100% Customer Satisfaction Warranty so that you know you’re getting exactly what you pay for!
3. Dashboard Pad Mounting Disk for Suction Cup Phone Mount & for Tom Tom Garmin GPS Suction Mount Sat Nav Dash Cam Holder Stick On Universal Dash Mount Pad w/3M Adhesive 70mm Diameter 3 Pcs
Feature
- To provide smooth, glass-like surfaces for pedestals of suction cup car mounts to work more effectively.
- 3M PE foam adhesive at the bottom can be fixed on textured surfaces.
- Has a diameter of around 2.76 inches, applicable to most suction cup GPS/mobile holders on the market.
- No tools required for installation.
- Buy with confidence as every APPS2Car product comes with one-year warranty.
4. Crossery Adhesive Mounting Disk for Car Dash Board | Phone Mount, Dashboard Cam & Smartphone Holder Suction Disc | Compatible with Garmin & Tom Tom GPS | Cell Phone & Car Accessories | 80mm 2-Pack
Feature
- ? UNIVERSAL – This semi-permanent adhesive mounting disk works with any 60mm suction mounts for adhering to dashboards. It is also compatible with Garmin and TomTom GPS mounting pedestals.
- ? PEEL & STICK – Easily apply this car accessory to your dashboard by removing the paper backing from the back of the mount disk, then placing and pressing it down on a previously cleaned surface.
- ? EASY REMOVAL – Apply a generous amount of rubbing alcohol or similar adhesive removal product to the area with a cotton swab. Cut through with a long piece of dental floss until the disk is removed.
- ? LEAVES NO DAMAGE – This mounting disk won’t leave a trace when you decide to remove it after installing. While the adhesive is strong, the disk can easily be lifted without leaving any residue.
- ? DURABLE & LONG-LASTING – With a strong adhesive, this car accessory is sure to last a long time. It is also heat resistant and can stick to vertical surfaces, soft touch dashboards and windshields.
Description
Worried that your suction cup mount will damage your dash?
Your GPS and other devices are essential while driving. However, mounting pedestals can be sticky, and when placed on textured or soft dashboards, can be a cause of concern. It is recommended to use an adhesive mounting disk to ensure that your dash won’t be damaged or be left with residue once you decide to remove it.
The same goes for your suction mobile holder. Mounting your device allows you to easily and conveniently view your phone on your dashboard or even your windshield. It is best to keep these flat surfaces blemish-free by using an adhesive mounting disk.
With Crossery Adhesive Mounting Disk, you can keep your dash protected!
Universal for any 70mm smartphone, car camera or GPS suction mount, this disk adheres to the dashboard while your suction cup mount adheres to the disk. With a much larger size than your suction cup, you can ensure a secure fit.
Now, you can mount your suction mounting pedestal, including your mounting pedestals for Garmin and TomTom GPS device, to your car’s dashboard or windshield for easy viewing.
Still not convinced? These other benefits will help you decide:
? This car accessory fits any 70mm mount securely, so your pedestal won’t fall off. ? The strong adhesive ensures that your device will not drop even if it is placed on your windshield.
? The disk is compact and doesn’t take up much space on your dashboard. ? It is a practical gift for friends and family. After all, who does not have a mobile phone?
Keep your dashboard and windshield protected. Add Crossery Adhesive Mounting Disk to your cart TODAY!
5. iSaddle Adapter Plate Circular Adhesive Dash/Console Disc with 3M Adhesive Suction Cup Base For Car Dashboards Garmin TomTom GPS Smartphone Dashboard Disc(2Pcs,Diameter About 71mm)
Description
The iSaddle Rotating Car Mount Dashboard Disk has a simple, sleek and discrete design to compliment the interior of any vehicle. Effortlessly transform your dashboard into a “glass-like” surface to make it compatible with most windshield-style car mounts, GPS device mounts and any other similar device mounting systems. No tools are required to install – simply adhere to the dashboard using the strong adhesive base and your Dashboard Disk is ready to go. Equipped with a full 360 degrees of rotation, allows for optimal viewing adjustments for all drivers. Once you find that perfect viewing angle, one simple press of a button will lock the Dashboard Disk into place to keep it from moving while you’re on-the-go. With a strong-hold, adhesive base and a durable design the iSaddle 360-Degree Rotating Car Mount Dashboard Disk is the perfect addition to your vehicle.
6. Arkon 80mm Adhesive Mounting Disk for Car Dashboards GPS Smartphone Dashboard Disc
Description
The AP013 80mm adhesive mounting disk allows you to mount an Arkon or third-party 70mm windshield suction mounting pedestal to your car’s dashboard, including Arkon’s mounting pedestal models GN079WD-SBH, GN068WD-SBH, GN022-SBH, GN014-SBH, GN015-SBH, and GN042-SBH. (Note that the disc is meant to be a bit larger than the mount to ensure a secure fit.) This package includes only the adhesive disk (mounting pedestals sold separately). To apply the adhesive disk to the car’s dashboard, simply remove the paper backing from the back of the plastic 3M dash mount disc, then place and press down on a previously cleaned surface. (Use included alcohol pad to ensure mounting area is clean and free of any dashboard conditioners or other treatments. For best results, allow 24 hours for the disk adhesive to cure on the dashboard before securing the base of the mount to the center of the disk.) While this disk is meant to be a semi-permanent solution, the disk can be removed from the dash by applying a generous amount of rubbing alcohol or similar adhesive removal product to the area with a cotton swab. Let the liquid saturate the area, then work a long piece of dental floss under the disk to cut through the adhesive until the disk is removed. For a 90mm disk to use with 80mm suction mounts, see Arkon Model AP020.
7. Metal Plate for Phone Magnet, 10 Pack Volport MagicPlate with 3M Adhesive Replacement for Magnetic Phone Car Mount Holder & Cradle & Stand (Vent/CD/Windshield/Dashboard) – Rectangle and Round
Feature
- This car magnet metal plate is designed to use with magnetic mobile phone car mount, magnetic air vent mount and other magnetic cellphone car mount. Good quality and value replacement metal plates for magnetic cell phone holder
- All 10 pack magnet mount plates have strong 3m adhesive on the back – 4 pack rectangular and 6 pack round. Give you enough options to use with multiple devices. The rectangular thin metal plate is better for larger phones, i phone xs, xs max, xr, 8 plus, mini tablets and gps devices
- Super thin metal plate and add no perceptible bulk for your phone or phone case. This phone mount plate for cell phone magnets allows you to place your phone horizontally or vertically. No more phone falling off even going over bumpy roads
- 8 pack for multiple devices and 2 pack extra small metal plates. You can share the extra metal plates with your family members or friends. These car mount magnet plates are also great additions for various phone cases
- All of the metal plates are not magnetic plates, we recommend this metal mounting plate along with universal magnetic mounts for dashboard, vents, cd slot, windshield or windows. for WIRELESS CHARGING, please place metal plate on the phone AWAY FROM wireless charging sensor. Or place metal plate on phone case, remove case when wireless charging
8. Wireless Charging Compatible Phone Metal Plate, eSamcore Phone Magnet Sticker for Magnetic Car Phone Mount Holder & Cradle & Stand for [Vent] [CD] [Windshield] [Dashboard] 1.7 X 1.7 Inch [2-Pack]
![Wireless Charging Compatible Phone Metal Plate, eSamcore Phone Magnet Sticker for Magnetic Car Phone Mount Holder & Cradle & Stand for [Vent] [CD] [Windshield] [Dashboard] 1.7 X 1.7 Inch [2-Pack]](https://images-na.ssl-images-amazon.com/images/I/81h2wbUpnBL._AC_SL1300_.jpg)
Feature
- Wireless Charging Friendly Metal Plate: eSamcore magnetic car phone mount metal plate works with all wireless chargers, and there is no need to take off the eSamcore magnet mount plates when wirelessly charging your Phone.
- All Magnetic Car Phone Mount Compatible:This eSamcore car magnet metal plate is designed to work with all kinds of magnetic cell phone car mount, magnetic air vent mount and other magnet phone holder for car（Car phone mount is not included).
- Strong Adhesive: Powerful 3.M. VHB tape provides high Stickiness to attach with your phone or case. For better magnetic effect, do not stick the eSamcore magnet metal plate inside the cell phone case.
- Notice: eSamcore metal plate can only be placed on a naked phone or a thin case (thinner than 2mm) in order to preserve the wireless charging functionality. Over-bulky phone cases will trap heat and slow wireless charging.
- Worry Free Purchase: All eSamcore mount metal plates have been 100% QC tested. You’ll get a 30 Days 100% money back guarantee and Lifetime replacement warranty if damage occurs. Please contact our friendly customer service team as we are available to help 24 hours/7 days a week.
9. AUKEY Car Phone Mount 360 Degree Rotation Dashboard Magnetic Cell Phone Holder for Car Compatible with iPhone 11 Pro Max / 11 / XS Max / XS / 8 / 7 , Samsung Galaxy S10+, Google Pixel 3 XL, and More
Feature
- Best Viewing:The base is able to rotate through 360 degrees, and the adjustable arm and ball joint makes it easy to find the ideal phone viewing angle
- Reliable Adhesion: Fixes securely to a flat surface on your dashboard. Features an additional sticker base for slightly curved or uneven surfaces
- Magnetic Attachment: Four powerful magnets securely hold your phone or GPS on your car dashboard. Just grab and go when you reach your destination. Note that wireless charging will not work when a magnetic plate is attached to your device or placed inside its case
- Easy Setup: Included circular metal plate (for smaller phones) and rectangular metal plate (for larger phones) easily slip between your phone and case or can be safely adhered to the back of your phone
- Package Contents: AUKEY HD-C49 Car Magnetic Phone Mount, Sticker Base, Circular Metal Plate, Rectangular Metal Plate, User Manual
10. Sticky Adhesive Replacement for Dashboard Pad Mounting Disk, VOLPORT 2pcs 3M Circle Heat Resistant Double Sided Tapes Strong VHB Sticker for Suction Cup Car Phone Holder Disc, GPS Windshield Dash Cam
Feature
- 【Designed for Suction items】Volport heat resistant 3M sticky adhesives for dashboard pad mounting base disk of suction cup phone mount. You can also adhere the adhesive to the suction cup directly. Applicable to most suction cup dashboard phone stand and other windshield long arm mount, GPS holder, tablet computer bracket, camera mount, ETC, iphone car mount, wireless charger base, dash camera mount holder, dashboard toys etc on the market. You can also cut it to the size you need.
- 【Genuine 3M Sticky Adhesive 】These phone dashboard car mount back stickers have high temperature(120℃+) resistance performance, even in Texas, you can use it without worry in hot Summer. Extra strong both side round 3M VHB circle dashboard cell phone grip replacement adhesion pads’s stickiness is 40% stronger than ordinary 2 side sticky glue. Easy to fix your car phone socket base, heavy duty dashboard mount base, you can stable and secure driving uber, truck, jeep, vehicle in bumpy roads.
- 【Easy to Install】The replacement kit comes with alcohol wipes to clean the surfaces before applying. Just peel off the old gel adhesive from mount and clean the the surface with alcohol wipe before using the new adhesive, after the surface is dried, peel off the 3m adhesive film to stick the dashboard pad mounting disc, or stick it to the bottom of the suction cup bracket directly and press down repeatedly for 5-10 minutes for better connecting to the surface, please wait 24 HOURS to use.
- 【Easy to Remove 】These flexible double sided car suction cup mount self adhesive is esay to remove, you can remove dash tray car mount stand without leaving clear adhesive residue, no tool required. Best car phone mount adhesive replacement. Make sure the surface of the chosen area and dashboard pad mounting disk of suction cup phone mount is cleaned completely before applying a new adhesive.
- 【Package includes】2 x 2.76 inch (70mm) round sticky adhesive, 4 x alcohol pads,1 x user manual. We provide a one-year warranty and if you need any help with our product, please do not hesitate to contact us and we will provide you our best after-sale service. All we want is your satisfaction.
Conclusion
By our suggestions above, we hope that you can found Small Disc Dash Board for you.Please don’t forget to share your experience by comment in this post. Thank you!
