Finding your suitable readers for pool pump at 220 volt 2 hp is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for pool pump at 220 volt 2 hp including detail information and customer reviews. Let’s find out which is your favorite one.
826 reviews analysed
1. Blue Wave NE6183 Tidal Wave 2-Speed Replacement Pump for Above Ground Pool, 1.5 HP,Black
Feature
- Dual port design for either vertical or horizontal discharge
- fits most filter systems
- Meets new local codes requiring energy-saving, multi-speed pool pumps
- Comes with power cord and fittings. Motor Frame Size-48 inch
- 1750 rpm low speed – energy saving speed for normal operation
- Simply toggle rocker switch at the rear of the motor to change speeds
- 3450 RPM high speed – for extra power when using pump with additional equipment like a pool vacuum
- Not legal for sale in California. Discharge Flow @ 0 feet (gallons/hour):4500
Description
Powerful performance with cost saving benefits! The TidalWave 2-speed energy efficient above ground pool pump lets you choose the pump speed that best fits the job for great energy cost savings. Slower flowing water means less friction in your filter and plumbing system, and thus less energy usage, so set the pump to low speed for everyday operation. When more power is needed to vacuum the pool or run other accessories, switch pump to high speed. Featuring corrosion proof polymer construction that will deliver years of reliable service, these pumps also provide a convenient hair/lint trap to ensure crystal clear water. The TidalWave high performance pump is quiet, efficient and self priming. Top discharge design fits most filters and its extra large clear lid allows for easy cleaning. Replace your old inefficient pump with this 2-speed water moving dynamo. Comes with a 6ft cord – 110volt AC Available in 2 sizes: 1 HP and 1.5 HP
2. Wayne 57729-WYN1 EEAUP250 1/4 HP Automatic ON/OFF Electric Water Removal Pump
Feature
- I switch technology turns pump on and off by sensing the presence of water
- removes water down to 3/8 in. Of surface
- 1/4 hp
- max. Flow rate is 3000 gallons per hour
- 1850 gph at 10 ft. Of discharge lift
- Can be left unattended to remove water
- Submersible reinforced sealed thermoplastic construction.Voltage:120V
- The water level must be at least 1-3/4 inches for the pump to cycle, prime, and operate. Water levels less than 1-3/4 inches will not allow the impeller to contact water therefore no water will be pumped. Garden hose adapter
Description
Product Description
Plug in and leave the pump unattended for worry-free water removal. Ideal for crawl spaces, flat roofs, window wells and other problem areas around the home where water accumulates.
From the Manufacturer
Plug in and leave the pump unattended for worry-free water removal. Ideal for crawl spaces, flat roofs, window wells and other problem areas around the home where water accumulates.
3. Nidec AST165 1.65 Horsepower 56J C-Flange Replacement Swimming Pool Pump Motor
Feature
- Replacement 1.65 Total Horsepower (THP) swimming pool pump motor
- Standard 56J-Frame, C-Flange motor with threaded shaft
- Features four 3/8-Inch threaded bolt-holes at 1, 5, 7 and 11 o’clock
- Designed to replace a 1.5-HP Up-Rated or 1-HP Full-Rated motor and compatible with 115/230 volts
- Fits a wide variety of pool pumps including American Products, Pentair, Astral, Hayward, Jacuzzi and Jandy
Description
The replacement 1.65 Total Horsepower (THP) swimming pool pump motor fits a wide variety of pool pumps including American Products, Pentair, Astral, Hayward, Jacuzzi and Jandy. Save yourself the time, headache, and hassle of re-plumbing and the expense of buying a whole new complete pump by replacing your old worn-out motor with a new THP replacement motor. The standard 56J-Frame, C-Flange motor features four 3/8-Inch threaded bolt-holes at 1, 5, 7 and 11 o’clock with a threaded motor shaft on the end. Each replacement motor is quality made, guaranteed to last, and covered by a full 1 year warranty. The new 1.65 Total Horsepower motor can be used to replace a 1.5-HP Up-Rated or 1-HP Full-Rated motor and is wired for 115/230 volts. It is highly recommended to replace pump seals, gaskets and lubricants when replacing your pump motor. US Motors Model: AST165.
4. Wayne VIP50 1/2 HP Thermoplastic Portable Electric Water Removal Pump
Description
Product Description
1/2 hp, submersible, non-clogging, vortex design utility pump, pumps up to 2500 gph at 0′, corrosion resistant reinforced thermoplastic housing, volute & impeller, bottom suction design filters debris & removes water down to 1/4 inch of surface, passes up to 1/2 inch solids, 1 1/4 inch nps high volume discharge with 3/4 inch Garden hose Adapter, easy access handle for portability. This product is assembled in the USA.Easy installation and easy handling.
Amazon.com
The Wayne 1/2 HP 2,500 GPH submersible utility water pump can handle material up to 1/2-inch thick without getting clogged. It can pump out 2500 gallons per hour, with a bottom suction that takes out water to within an eighth of an inch of the surface. Glass reinforced thermoplastic for the housing, volute, and impeller prevents rust, the 3/4-inch adjustable discharge adapter easily connects to garden hoses, and an easy-access handle provides complete portability. Wayne backs its pump with a one-year limited warranty.
5. Basement Watchdog BW1033 Sump Pump, 2200 Gallon Per Hour
Feature
- 3720 GPH at 10’ and 3100 at 0’
- 2 floats for added redundancy
- Dual float protective cage prevents debris or wires from interfering with float operation
- Permanent split capacitor motor – uses less energy
- Pump will pay for itself in energy savings
- Dual ball bearings – exceptionally quiet performance
- Dual seals to protect the motor – extra protection
- Water cooled – no oil to leak, eco-friendly
- Continuous duty pump
- Cast Iron/Cast Aluminum – heavy duty construction
Description
Product Description
The Basement Watchdog 1/3 HP, Top Discharge Primary A/C Sump Pump with caged Dual Float Switch is ultra-compact and powerful.
From the Manufacturer
Not all sump pumps are created equal. The complete line of Basement Watchdog AC pumps is rated for continuous duty, which means they are built to run continuously 24 hours a day, 365 days a year. They-Fleeter strong and dependable, and when they are used intermittently in a sump application, it extends the life of the pump. We back this up by offering a 3-year warranty on all models when used in intermittent applications. 115V. 60Hz. 1/3 Horsepower.
6. WAYNE CDU1000 1 HP Submersible Cast Iron and Stainless Steel Sump Pump with Integrated Vertical Float Switch – 58321-WYN2
Feature
- Top suction pump design eliminates air locks and clogging from debris in bottom of sump pit
- Stainless steel motor housing and rugged, cast iron pump base
- Fully submersible
- 1 hp
- max. maximum flow rate is 6100 Gallons Per Hour, 5100 GPH at 10 feet of discharge lift
- 1-1/2″ npt discharge
- Assembled in the US with foreign and domestic parts.
Description
Product Description
The Wayne CDU1000 submersible sump pump can move up to 5400 gallons per hour (gph) at 10 feet of discharge lift. the top suction design filters debris and minimizes clogging. It is a rugged, stainless steel and cast iron submersible sump pump. This pump is designed for 11-inch diameter and larger sump pits.8 feet Water Resisitant Power Cord provides easy access to nearby GFCI(round fault circuit interrupter) protected outlet
From the Manufacturer
The Wayne CDU1000 submersible sump pump can move up to 5400 gallons per hour (gph) at 10 feet of discharge lift. The top suction design filters debris and minimizes clogging. It is a rugged, stainless steel and cast iron submersible sump pump. This pump is designed for 11-Inch diameter and larger sump pits.
7. WAYNE WLS150 1.5 HP High Volume Cast Iron Lawn Sprinkling Pump
Description
Product Description
The Wayne WLS150 cast iron sprinkling pump pumps up to 2320-gallon per hour at 30 psi. It’s features include a durable cast iron volute and corrosion-resistant, reinforced thermoplastic infuser and impeller. The dual voltage motor is factory wired for 230-volt. The pump is designed to operate underground sprinkling systems, draw water from well, lake or ponds for watering, pool filling or any other applications where high water column is needed.
From the Manufacturer
The Wayne WLS150 cast iron sprinkling pump pumps up to 2320-Gallon per hour at 30 PSI. It’s features include a durable cast iron volute and corrosion-resistant, reinforced thermoplastic infuser and impeller. The dual voltage motor is factory wired for 230-Volt. The pump is designed to operate underground sprinkling systems, draw water from well, lake or ponds for watering, pool filling or any other applications where high water column is needed.
8. WAYNE CDU800 1/2 HP Submersible Cast Iron and Steel Sump Pump With Integrated Vertical Float Switch
Description
Product Description
1/2 HP, Cast Iron, Submersible Sump Pump, With Vertical Switch, Designed For 11″ Diameter Or Larger Sump Basin. Pumps Up To 4200 GPH at 0′, Durable Cast Iron Volute, Reliable, Reinforced Poly Carbonate Impeller, Corrosion Resistant Stainless Steel Fasteners, Top Suction Design Filters Debris & Minimizes Clogging, Oil Filled, Thermally Protected Motor Prevents Overheating, Designed For Easy Installation Without Any Plumbing Changes, Epoxy Coated Steel, High Performance 1/2 HP, Motor, 1-1/2″ NPT Discharge & Durable Cast Iron Base, Easy Carry Handle For Portability, Float Guard Protects Switch From Hang Ups. This product is assembled in the USA. Easy installation and easy handling.
Amazon.com
The Wayne 1/2 HP cast iron submersible sump pump is designed for work in sump pits 11 inches or larger. Its ceramic mechanical seal keeps this pump going in even the most demanding environments, and the 1 1/2-inch discharges creates maximum flow and ensures easy installation. It works 9 inches on level or 4 inches off level. A two-pole switch prevents basement flooding in the event that one pole sticks, and disconnecting 115-volt conductors prevent damage from lightning. The automatic overload mechanism prevents damage to motor windings, permanently lubricated ball bearings need no oiling, and the waterproof three-prong grounding wire with an 8-foot extension reaches distant outlets. Wayne backs its pump with a three-year limited warranty.
9. WAYNE CDU790 1/3 HP Submersible Cast Iron and Steel Sump Pump With Integrated Vertical Float Switch
Feature
- N/A
- Imported
- Assembled in the US with foreign and domestic parts.
- Tested to 1 million cycles*
- Mechanical float switch provides reliable operation and allows installation in sump basins 11″ in diameter or larger
- Top suction strainer filters debris and protects pump from clogging. The pump does not require weep holes and the cast iron seal plate prevents galvanic corrosion and leaks
- High capacity 1-1/2″ npt discharge
- Heavy duty oil filled motor for long life
- Cast iron pump housing for durability
Description
Product Description
1/3 hp, cast iron, submersible sump pump, with vertical switch, pumps up to 3800 gph at 0′, designed for 11 inch diameter or larger sump basin, top suction design filters debris & minimizes clogging, designed for easy installation without any Plumbing changes, epoxy coated steel, high performance 1/3 hp, motor, 1-1/2 inch NPT discharge & durable cast iron base, easy carry handle for portability, float guard protects switch from hang ups. The product is manufactured in china. Easy installation and easy handling.
From the Manufacturer
The Wayne CDU790 features durable cast iron housing for long life and quiet operation. This submersible pump is compactly designed for 11″ or larger sump pits. The CDU series is one of the most popular replacement pumps in America. The ceramic mechanical seal assures long life in the most demanding applications and the 1 1/2″ discharge allows easy installation plus maximum flow. Similar applications to the following brands of submersible sump pumps , Craftsman, Zoeller, Flotec, Water Ace, Myers, Little Giant, Liberty, Pit Viper, Ridgid, Blue Angel, Sta-Rite, Starite, Diamond, Star, Flint and Walling, Coleman, Maytag, Jacuzzi, ShurDri, Shur-dri, GSW, Teel, Master Plumber, UL listed
10. WAYNE CDU980E 3/4 HP Submersible Cast Iron and Stainless Steel Sump Pump With Integrated Vertical Float Switch
Feature
- The product is manufactured in china
- Abrasion Resistant Glass Reinforced Polycarbonate Impeller for Reliability
- The product is highly durable and easy to use. 8 feet water resistant power cord
- Easy installation and easy handling. 120 V, PSC, Oil-Filled 3/4 HP Motor
- For Use In 11 inch. Diameter or Larger Sump Basins
Description
Product Description
3/4 hp, cast iron/stainless steel, submersible sump pump, with vertical switch, designed for 11 inch diameter or larger sump basin, pumps up to 4600 gph at 0′, durable cast iron volute, reliable, reinforced poly carbonate impeller, corrosion resistant stainless steel motor housing & fasteners, top suction design filters debris & minimizes clogging, oil filled, thermally protected motor prevents overheating, designed for easy installation without any Plumbing changes, epoxy coated steel, high performance 3/4 hp, motor, 1-1/2 inch NPT discharge & durable cast iron base, easy carry handle for portability, float guard protects switch from hang ups, 5 year warranty. This product is assembled in the USA. Easy installation and easy handling.
From the Manufacturer
The Wayne CDU980E submersible sump pump can move up to 4600 gallons per hour (gph). The top suction design filters debris and minimizes clogging. It is a rugged, stainless steel and cast iron submersible sump pump. This pump is designed for 11-Inch diameter and larger sump pits.
Conclusion
By our suggestions above, we hope that you can found Pool Pump At 220 Volt 2 Hp for you.Please don’t forget to share your experience by comment in this post. Thank you!
