Nowadays, there are so many products of pool heaters with cooling in the market and you are wondering to choose a best one.You have searched for pool heaters with cooling in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings pool heaters with cooling which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
867 reviews analysed
1. Intex Easy Set 8-Foot-by-30-Inch Round Pool Set
- Intex Easy Set Pools are great for adults and kids alike
- Ready for water in 10 minutes
- Included 330 GPH filtration pump comes with a GFCI (Ground Fault Circuit Interrupter) saftey plug feature
- SUPER-TOUGH(TM) Plastic is unaffected by gasoline, oil and salt water & highly resistant to damage from abrasion, impact and sunlight
- Water capacity: 639 gallons at 80% full
Intex’s Easy Set pools are great for smaller children, smaller yards, or for families making their first pool purchase, Easy for consumers to carry to the back yard and easy to assemble, Filter pump and instructional DVD included, Measures 8 feet by 30 inches
2. Inkbird ITC-308 Max.1200W Heater, Cool Device Temperature Controller, Carboy, Homebrew, Fermenter, Greenhouse Terrarium Temp. Control
- [Convenient Design] Plug and play design, easy to use. Support °C/°F display.
- [Dual Relay Output] Be able to connect with refrigeration and heating equipment at the same time.
- [Dual Display Window] Be able to display measured temperature and set temperature at the same time.
- [Buzzer Alarm] High and low temperature alarms are available when the temperature is over or the sensor is with issue.
- [Warranty & Safe] Warranty: 1 year. Maximum output load: 1100W(110V). It is with temperature calibration and compressor delay which can protect your refrigeration.
Temperature Control Range: -50~99°C / -58~210°F
Temperature Resolution: 0.1°C / 0.1°F Temperature Accuracy: ±1°C (-50~70°C) / ±1°F (-50~160°F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V~240V AC
Buzzer Alarm: High and Low Temperature Alarm
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Body Dimension: 140x68x33mm (5.5×2.7×1.3inch)
Socket Dimension: 85x42x24mm (3.3×1.7x1inch)
Ambient Temperature: -30~75°C / -22~167°F
Storage Temperature: -20~60°C / -4~140°F
Humidity: 20~85% (No Condensate)
Warranty: 1 Year
1x ITC-308 Temperature Controller
3. Blue Wave NS520 14-mil Solar Blanket, 16x32ft Rectangle, Clear
- CONSERVES ENERGY – This 14-mil blanket covers your swimming pool and employs solar heating to increase the water temperature by up to 15 degrees Fahrenheit.
- MINIMIZES HEAT LOSS: Our insulating thermal bubbles provide effective heating all summer long. This blanket is packed with innovative cells ensuring your swimming pool stays warm through cool nights and cloudy days.
- SUPERIOR DURABILITY – This Rectangular 14-mil Solar Blanket for in-ground swimming pools is designed to withstand deterioration caused by ultraviolet rays and chemicals.
- 6-YEAR WARRANTY – Your product comes with a 6-year manufacturer warranty. Your item will arrive damage free with all necessary parts and accessories. If something goes wrong, we’ll work tirelessly until you’re satisfied with your product.
- DIMENSIONS – 16-ft W x 32-ft L x 0.5-in H
Warm your pool fast with a Magni-Clear solar blanket for Rectangular In-Ground Pools. Each of these innovative pool covers is packed with air bubbles that create an insulating layer, protecting your swimming pool from chilly winds and nighttime cooling. These tiny cells trap heat, so water stays warm even on cloudy days and cool nights. The clear plastic design lets in more sunlight, so the warmth reaches deeper for consistent, natural heating that surpasses comparable Intex spa covers. Our outdoor blankets are UV-protected and chemical resistant in order to endure years of direct sunlight.
4. Intex Solar Cover for 18ft Diameter Easy Set and Frame Pools
Intex Krystal Clear 18-Foot Solar Pool Cover
Product Measures: 18.9 x 13.39 x 22.83 IN
From the Manufacturer
Intex krystal clear solar cover 18′. Helps keep water warmer. Easy to use. Includes carry bag for storage when not in use. Fits just inside edge of pool and floats in place. Lighweight material
5. bayite BYT-7A014 DC 12V Solar Hot Water Heater Circulation Pump Low Noise 3M Discharge Head 2.1GPM
- Circulation pump is non-self-priming pump. Max Flow Rate: 2.1GPM, Max Discharge Head: 9.8ft
- 1/2″ Male thread on the pump. The OD of the brass coupler is 10mm. Plug type: 2.1mm x 5.5mm female. NO POWER ADAPTER INCLUDED
- Power source: DC 12V(NOT INCLUDED), Rated current: 0.7A, Brushless Motor, Low noise: 30db at 1 metre, Service life: 30000 hours
- Max circulating water temperature: 100°C/212°F. It’s submersible but can’t be immersed in hot water exceeding 50°C/122℉
- One year warranty: replacement without return
It’s perfect for the home solar water heating systems or other circulation pump application.
Brushless Motor,Super long working life,low consumption and low noise
Power source: DC 12V
Rated current: 0.7A
Low noise: 30db at 1 metre
Service life: 30000 hours up
Inlet/Outlet: 1/2″ male thead. Fit both 1/2″ NPT and BSP female thead. We’ve tested. w/ two brass coupler
Max Flow Rate: 8L/Min(2.1GPM)
Max Water Head: 3 metre(9.8ft)
Max system pressure: 10Bar(145PSI)
Max circulating water temperature: 100°C/212°F. Can’t be immersed in hot water exceeding 50°C/122℉
1x bayite DC 12V Circulation Water Pump(NO POWER ADAPTER INCLUDED)
6. Active Aqua AACH50HP Water Chiller Cooling System, 1/2 HP, Rated per hour: 4,020BTU, User-Friendly
Active Aqua Chillers are ideal for keeping the nutrient solution in your reservoir at the perfect temperature. Each unit has a user-friendly temperature system that allows you to control your desired temperature range as needed, & all models now have a boost function that accelerates the chilling process for quicker establishment of desired nutrient solution temperature.Rated Wattage : 510
7. Pentair 471424 Standard Flow Valve Complete Assembly Replacement Pool and Spa Heater
Pentair 471424 Standard Flow Valve Complete Assembly Replacement Pool and Spa Heater
8. Outdoor Wood Boiler Pool Heat Exchanger 210K btu 316L for Swimming Pool/Spa/Solar Heating by WiseWater
- Tube side connections (boiler/straight-through): 1-1/2″ Female NPT
- Shell side connections (pool/side outlets): 1-1/2” Female NPT
- Pool size: up to 18,000 Gallons
- Flow rates: 9 GPM (boiler side) / 65 GPM (pool side)
- Use for Swimming Pools, Spas, Hot Tubs, Solar, Hydronic Heating, Oil Cooling, Heat Recovery, Snow Melting
Swimming pool applications (everyday use): Pool size: up to 18,000 Gallons Heating rate: 1ºF/hr (pool water) Flow rates: 9 GPM (boiler side) / 65 GPM (pool side) *numbers based on a 122ºF difference between liquids. For occasional use (i.e. weekends), a unit with x2 times the BTU output is recommended to increase heating rate to 2ºF/hr. BTU Capacity: 210,000 BTU (210 kBTU) Tube side connections (boiler/straight-through): 1-1/2″ Female NPT Shell side connections (pool/side outlets): 1-1/2” Female NPT
9. AB Pool Heat Exchanger: 360 kBtu Stainless Steel 316L Opposite Ports 2" & 1 1/2" FPT for Spa/Solar/Swimming Heating and Cooling
- Pool heating capacity up to 29,000 gallon 360 kBtu/hr fresh pool based on 60°C (140°F) temperature difference between incoming heating and heated water
- Fully made of high grade anti-corrosion stainless steel 316L for swimming pool, spa, hot tub with chemical treatment.
- 1 year warranty to cover manufacturer defects.
- 2″ FPT opposite side for pool water and 1 1/2″ FPT for hot water
- Various applications: Pool/spa/hot tub heating, outdoor wood furnaces, hydronic heating, forced air heating, floor radiant heating, snow melting, solar water heating
10. GESAIL Immersion Heater, 1500W Submersible Immersion Water Heater with Full 304 Stainless-Steel Guard and Digital LCD Thermometer, Bucket Heater Heats 5 Gallons of Water in Mimutes – Rose
- High Power: 1500W, 120V bucket water heater, use for water only, heats 5 gallons of water in few minutes, portable immersion heater will heat water to boiling when you plug in, just make sure the water is always full cover the water immersion heater. the package comes with a digital LCD thermometer as gift.
- Rust Proof Stainless-steel Guard – The heavy duty 304 stainless-steel guard on the electric bucket heater protects the heating element from directly contacting persons or animals. it is rust proof and durable, design for long term use. The holes on the guard dissipates heat into the water faster.
- Simple Operation: Place immersion heater for water in a container designed to contain boiling water, fill the container with water to full cover the submersible bucket heater shield(including stainless-steel guard and plastic part), plug portable water heater into a properly grounded 120V AC outlet, make sure the portable immersion heater is on, Feel the difference in a few minutes!
- Widely Application: The bucket heater immersion can be used in different size container like bucket, basin, bath tub, mini inflatable swimming pool, etc.please make sure the container design to hold boiling water, or unplug it before boiling.perfect for winter time job such as car washing, heat your farm animals’ water, your tiling water on the job site ect.
- Warranty: Full one year warranty against defects, please contact us if have any problems, we will solve it at the first time. Package included: 1 pack bucket heater + 1 digital thermometer + Manual.
By our suggestions above, we hope that you can found Pool Heaters With Cooling for you.Please don’t forget to share your experience by comment in this post. Thank you!