Top 10 Msi 1070 Water Block

The Bykski A-RYZEN-TECH-V2-X CPU Water Cooling Block w/ Temp Digital Display features a real time temperature display. This display is integrated directly onto the top of the block creating an easy to read output as well as stunning visual aesthetics. The display shows real time temperature as well as a 120 second history of temp changes. The block is constructed of high purity copper that is electroplated to prevent oxidation. A high flow design is used to allow maximum performance. Built in RGB lights can be used to illuminate this beauty with style.
Features

Specifications

Compatibility

Parts Included

Warnings
Manufacturer reserves right to alter block design to expand compatibility. Delivered item may not 100% match pictured item.
PrimoChill is not responsible for any damage caused by or when using this product. Please use at your own risk.

EK-FC GeForce GTX FE is a high-performance full-cover water block for multiple NVIDIA GeForc GTX and Titan X (Pascal) based graphics cards. This water block directly cools the GPU, RAM, and VRM (voltage regulation module) as water flows directly over these critical areas thus allowing the graphics card and it’s VRM to remain stable under high overclocks. EK-FC GeFroce GTX FE water block features a central inlet split-flow cooling engine design for best possible cooling performance, which also works flawlessly with reversed water flow without adversely affecting the cooling performance. This kind of efficient cooling will allow your high-end graphics card to reach higher boost clocks, thus providing more performance during gaming or other GPU intense tasks. Moreover, such design offers great hydraulic performance allowing this product to be used in liquid cooling systems using weaker water pumps. The base of the block is made of nickel-plated electrolytic copper while the top is made of quality acrylic material. The top also features two pre-drilled slots for 3mm LEDs. The sealing is ensured by quality rubber washers. Screw-in brass standoffs are pre-installed and allow for safe, painless installation procedure. The EK-FC GeForce GTX FE water block is backward compatible with all EK-FC1080 GTX Backplates, EK-FC1080 GTX Ti Backplates, and EK-FC Titan X Pascal Backplates. G1/4″ threaded fittings can be used on both sides of the FC terminal. Up to four EK-FC GeForce GTX FE water blocks can be used on a single ATX form factor motherboard by using EK-FC Terminal (DUAL, TRIPLE or QUAD type) system or other means of interconnectivity. Please note that EK-FC Bridge & Link system is not compatible with this water block. The EK-FC GeForce GTX FE water block is compatible with all reference design GeForce GTX 1060, GeForce GTX 1070, GeForce GTX 1080, GeForce GTX 1080 Ti, GeForce Titan X Pascal and GeForce Titan Xp based graphics cards.

Model: 3831109831977

100% new, fine workmanship, simple sense is very strong!
Bykski N-GX1060-X for Pcasl All Series Reference Version GTX 1060 design,please confirm before buying graphics specific specifications, to ensure the compatibility of water cooling block.
Water cooling block is designed using 0.2 MM micro channel injection, all designed for performance! Core (GPU), direct cooling graphics memory (RAM), as well as the graphics card power supply (VRM) these hot key parts of the graphics card, to ensure that the players and the stability of the overclocking, maintain a good temperature.
Graphics using large water flow design, even if the hm weaker pump can meet the demand.
Water cooling block at the bottom of the use of high purity copper manufacturing, and electroplating processing to prevent oxidation, more make water head of delicate and beautiful. Cover the use of high-quality POM material or imported acrylic materials, ensure the service life of water head and durability. Sealing material using a high standard of sealing ring resistance to ageing of fatigue, ensure the sealing water cooling block.
Video card water cooling block is free to change direction, convenient players form a SLI&CF firefight system, can be in series or in parallel.
parts list:
fast twist (3/8ID*1/2OD) X 2
plugs X 2
Thermal paste X 1
mounting screws X 1
RGB LED X 1
Compatible graphics card type:NVIDIA Quadro P2000
Compatible graphics card type: All Series Reference Version GTX 1060
Compatible graphics card type:ZOTAC GTX 1060 AMPED
Compatible graphics card type:NVIDIA Quadro P2000
NOTE:Before buying, please contact the seller, the GPU WATER COOLING BLOCK compatible models, factory often modify graphics PCB, so in order to avoid after the purchase is not compatible .

Compatibilities List (Including but not limited to the following models)
Please send us message to confirm if you are not sure about the compatibilities. Thanks.
Asus ROG-STRIX-GTX 1080TI-O11G-GAMING
Asus ROG-STRIX-GTX 1080-O8G-GAMING
Asus ROG-STRIX-GTX 1070TI-8G-GAMING
Asus ROG-STRIX-GTX 1070-O8G-GAMING
Asus ROG-STRIX-GTX 1070-8G-GAMING
Asus DRAGON GTX 1070-O8G
Asus DRAGON GTX 1070-TOP8G
Asus ROG-STRIX-GTX 1060-O6G-GAMING

Features:
1. Block with 0.5mm micro channel injection design, all designed only for performance! Direct cooling of the graphics core (GPU), memory (RAM) key heating parts of the graphics, to ensure stability when overclocking.
2. Block using large flow design, even if low raise pump can use it.
3. Block made by high purity copper, and electroplating to prevent oxidation and makes beautiful. The upper cover using high quality POM materials or acrylic to ensure block long life and durability.
4. Inlet and outlet can change direction free, easy to build CF and Crossfire system.

Please Pay Attention:
1. Please double check the graphics card detail model to ensure compatibility
2. 2pcs G1/4 3/8″ ID 1/2″ OD Silver Compression Fittings are included, instead of the ones in the pictures.
3. The pictures are for reference only, we can only guarantee the performance and compatibility of the products, the factory can change product design at any time for the improvement of the product.
4. Prohibit the use of alcohol containing coolant.
5. Graphics card block installation requires a certain skill and experience, because the graphics card manufacturing tolerances may have a certain impact on the block installation, we can assist buyers to solve such problems, but this can not be the basis of returns.

The Corsair Hydro x series XC7 RGB CPU water block combines premium construction, vivid RGB lighting and extreme cooling performance. A precision machined nickel-plated copper cold plate and more 60 high-efficiency micro-cooling fins draw the maximum amount of heat from your CPU, dropping temperatures and letting you push your clock speeds to their maximum. A transparent flow chamber shows off your coolant in all its glory, lit by 16 individually addressable RGB LEDs for 360° of customizable RGB lighting, controlled by adding a Corsair lighting Node Pro or Commander Pro. Powered by Corsair iCUE software to deliver nearly limitless lighting customization and control, the XC7 is ready to become to become the centerpiece of your custom cooling system. Tech Support # 1-888-222-4346 opt #1

MSI Gaming GeForce GTX 1070 Ti 256-Bit 8GB GDDR5 VR and HDCP Ready SLI Support PCI Express 3.0 x16 Multi-Display Technology DisplayPort x 3 / HDMI / DL-DVI-D output Graphics Card (GTX 1070 TI GAMING 8G)

Dressed in a fashionable Black & white design inspired by advanced Armor shielding, the MSI GeForce GTX 1070 ARMOR 8G OC is perfect for gamers and case modders looking for something unique and different. The new Armor 2x thermal design uses the Patented torx fan technology also found on the award winning Twin frozr V graphics cards and advanced airflow control for enhanced cooling performance. Msi’s zero frozr technology Stops the fans in low-load situations such as web browsing or light gaming to remain fully silent.

MSI GT63 TITAN-052 15.6″ 120Hz 3ms G-SYNC extreme gaming Laptop GTX 1080 8G i7-8750h (6 cores) 16GB 256GB SSD + 1TB, per key RGB KB, Windows 10 64 bit.

MSI GeForce GTX 1060 GAMING X 6G Twin frozr VI thermal design raises the bar of graphics card Air cooling. Torx fan 2.0 is the enhanced version of the Patented torx fan technology which generates 22% more Air pressure for better cooling performance while further reducing noise levels. The new fans are equipped with double ball bearings to ensure lasting smooth and silent operation. Connected to the huge heat sink are copper heat Pipes with a squared shape at the bottom for optimal heat transfer from the solid nickel-plated copper baseplate combined with premium thermal compound x to keep the pascal powerhouse cool.