Finding your suitable readers for liberty pumps 1 hp is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for liberty pumps 1 hp including detail information and customer reviews. Let’s find out which is your favorite one.
820 reviews analysed
1. Liberty Pumps PRG101A ProVore PRG Series Automatic Residential Grinder Pump, 1HP, 115-volt
2. Liberty Pumps LE51A LE50-Series Submersible Automatic Sewage Pump
3. Liberty Pumps P372LE51 Sewage Pump System, 1/2HP, 115V, 2" discharge, 21"x30" basin
4. Liberty Pumps P382LE51 1/2-Horse Power 24 by 24-Inch Pro380 Series Simplex Sewage System
Description
Product description
Technical Specifications of Liberty Pumps P382LE51:* Horsepower: 1/2HP;* Cord length: 10′;* Voltage: 115V;* Amps: 12;* Hertz: 60 Hz;* Phase: 1;* Inlet: 4″;* Discharge: 2″;* Vent: 2″;* Solids Handling: up to 2″;* Shut-off Head: 25′;* Maximum fluid temperature: 140°F;* System Weight: 64 lbs.;* Basin Height: 24″;* Basin Width: 24″;* Basin Capacity: 41 gallon;
From the Manufacturer
The Pro380-Series is a large capacity shallow system design featuring a 24 x 24-Inch basin – perfect for bedrock and difficult soil conditions. The Pro380-Series offers a large 41-Gallon capacity and longer pump cycles for extended pump life. The Pro380-Series sewage package arrives from the factory pre-assembled with QuickTree Technology saving valuable labor time at the job site. Give the Pro380 a try and see why more contractors are demanding Liberty. New QuickTree technology available on the Pro-Series allows easy inspection and replacement of the pump and/or alarm float without disconnecting plumbing or removing the pump itself. Floats are mounted on a stainless steel rod (tree) and suspended in the system by means of a holder built into the main cover. Access to the QuickTree is easily accomplished by a secondary “access” cover. To protect the system during rough-in and masonry work, the new Pro-Series are shipped with a clear disposable construction cover. This recyclable cover is simply snapped in place and can be easily removed when the system is ready for finish plumbing. The Pro380 series also features a separate access cover, an anti-flotation collar, molded torque-stops, unique integrated cord seal technology, and integral rubber cover seals.
5. Liberty Pumps 237 1/3-Horse Power 1-1/2-Inch Discharge 230-Series Automatic Submersible Sump Pump with VMF Switch
6. Liberty Pumps 287 1/2-Horse Power 1-1/2-Inch Discharge 280-Series Automatic Submersible Sump Pump with VMF Switch
Feature
- Pumps up to 67 GPM
- Maximum head 37-Foot
- Quick-disconnect 10-Foot standard power cord allows replacement of cord in seconds without breaking seals to motor
- Efficient motor design reduces electrical usage by up to 40-percent
- Includes a magnetically operated VMF switch for smaller pits down to a 10-Inch diameter
Description
Product description
Liberty Pumps 287 is a 1/2HP Automatic Submersible Sump Pump with with magnetically operated vertical float VMF switch and 10ft power cord. Turn-on level of the not adjustable switch is 9-1/2″ and turn-off level is 4″. This pump can operate in a smaller 10″ diameter sump pit.The Liberty Pumps 287 has 1-1/2″ NPT discharge, 3/4″ solids-handling,37′ shut-off head, a unique one-piece cast iron housing and thermally protectedpermanently lubricated motor.Liberty Pumps 287 is a 1/2HP Automatic Submersible Sump Pump with with magnetically operated vertical float VMF switch and 10ft power cord. Turn-on level of the not adjustable switch is 9-1/2″ and turn-off level is 4″. This pump can operate in a smaller 10″ diameter sump pit.The Liberty Pumps 287 has 1-1/2″ NPT discharge, 3/4″ solids-handling,37′ shut-off head, a unique one-piece cast iron housing and thermally protectedpermanently lubricated motor.For Sump and De-watering Applications only. This Vertical Magnetic Float (VMF) model is not recommended for effluent applications due to their short On/Off cycle. Wide angle float models (Liberty Pumps 281 and 283) are better suited for effluent applications and are easily adjustable for different On/Off levels.For added protection, consider the addition of a back-up pump such as Liberty’s SJ10 SumpJet, as well as an alarm such as Liberty’s ALM-2 in applications where loss of pump function could result in property damage. If an alarm is used, it must be connected to a separate electrical circuit.CAUTION Do not let the pump run dry.
From the Manufacturer
With a shut-off head of 37-Feet and 3/4-Inch solids-handling capability, the 280-series by Liberty covers a wide-range of low-head to mid-range pump applications. Designed for STEP systems, mound systems, liquid waste transfer and high output sump applications, you can count on the 280-series to offer superior performance. High-output 1/2 hp motor submersible with rugged cast iron housing. The 280-series features a hermetically sealed motor with thermal overload protection, a stainless steel removable bottom screen, a stainless steel rotor shaft, and permanently lubricated upper and lower bearings. This sump pump is for sump pits no less than 10-Inch in diameter.
7. Liberty Pumps 257 1/3-Horse Power 1-1/2-Inch Discharge 250-Series Cast Iron Automatic Submersible Sump/Effluent Pump with VMF Switch
Description
Product Description
Liberty Pumps 257 is a 1/3HP Automatic Submersible Sump Pump with with magnetically operated vertical float VMF switch and 10ft power cord. Turn-on level of the not adjustable switch is 7″ and turn-off level is 3-1/2″. This pump can operate in a smaller 10″ diameter sump pit.The Liberty Pumps 257 has 1-1/2″ NPT discharge, 1/2″ solids-handling, 18′ shut-off head, a unique one-piece cast iron housing and thermally protected permanently lubricated motor.For Sump and De-watering Applications only. This Vertical Magnetic Float (VMF) model is not recommended for effluent applications due to their short On/Off cycle. Wide angle float models (Liberty Pumps 251 and 253) are better suited for effluent applications and are easily adjustable for different On/Off levels.For added protection, consider the addition of a back-up pump such as Liberty’s SJ10 SumpJet, as well as an alarm such as Liberty’s ALM-2 in applications where loss of pump function could result in property damage. If an alarm is used, it must be connected to a separate electrical circuit.CAUTION Do not let the pump run dry.
From the Manufacturer
Rugged and dependable heavy-duty cast iron pump with powder coat finish. Liberty’s “workhorse” sump pump features a unique one-piece cast iron body, 10-Foot quick-disconnect power cord. With a durable, epoxy powder coat finish and vortex style impeller, Liberty’s 250-series pump is the perfect choice for low-head effluent pumping or basement de-watering. This sump pump is for sump pits no less than 10-Inch in diameter.
8. Liberty Pumps 405 Commercial 1/2 HP Drain Pump one-size
Feature
- Factory pre-assembled – Fully automatic operation
- Quick Tree technology allows quick inspection and removal of float switch without disconnecting the plumbing
- Oil-filled motor with thermal-overload protection
- Corrosion-resistant polyolefin basin with integrally molded rubber gasket for a superior gas-tight seal
- Maintenance-free, permanently lubricated sealed bearings
Description
Product Description
Liberty’s 405 is a specially designed commercial drain pump built to perform in high-head, high temperature situations. Our Quick Tree Technology provides a separate access cover for easy switch inspection. For gray wastewater applications, the 405 is perfect for laundry trays, multi-compartment sinks, bar sinks, utility sinks, dishwashers and allows you the freedom to install fixtures where gravity drain lines are not available. The system arrives fully assembled and ready to install.
From the Manufacturer
Liberty’s 405 is a specially designed commercial drain pump built to perform in high-head, high temperature situations. Our QuickTree Technology provides a separate access cover for easy switch inspection. For gray wastewater applications, the 405 is perfect for laundry trays, multi-compartment sinks, bar sinks, utility sinks, dishwashers and allows you the freedom to install fixtures where gravity drain lines are not available. The system arrives fully assembled and ready to install.
9. Liberty Pumps LE41A LE40 PUMP, RED
Description
Product Description
Heavy-duty built and reliable, Liberty’s LE40-series is the perfect choice for residential sewage applications. Featuring all cast iron construction with an epoxy powder coat finish, stainless steel fasteners, quick-disconnect power cord and a vortex style impeller for superior solids handling, the LE40-series combines solid performance with exceptional value.
From the Manufacturer
Heavy-duty built and reliable, Liberty’s LE40-series is the perfect choice for residential sewage applications. Featuring all cast iron construction with an epoxy powder coat finish, stainless steel fasteners, quick-disconnect power cord and a vortex style impeller for superior solids handling, the LE40-series combines solid performance with exceptional value.
Conclusion
By our suggestions above, we hope that you can found Liberty Pumps 1 Hp for you.Please don’t forget to share your experience by comment in this post. Thank you!
