817 reviews analysed
1. Simpson Strong-Tie 5005069 3.5 in. Washer Wood Screw44; Black 3-1/2"
Description
The Outdoor Accents Structural Screw Reduces Installation Time By Driving Easily Without Predrilling. When Combined With The Patent-Pending Load Rated Outdoor Accents Structural Washer, The Solution Delivers The Decorative Appearance Of A Bolt Connection But With A Much Easier Installation Than Through-Bolting. The Structural Screw And Washer Are Sold Separately From Each Other And The Outdoor Accents Connectors. Its Bold Thread Design Enables Superior Holding To Attach Ledgers And Other Connections. These Are Complete Line Of Heavy-Duty Shop Products That Will Bring You Years Of Reliable Performance.
2. CONFAST 1/4" (Inside/Screw 1/4-20 Diameter) Machine Screw Anchor with 1 Setting Tool (100 per Box)
Feature
- SHALLOW EMBEDMENT OPPORTUITIES-Less time required to drill hole
- NATIONAL COARSE THREADS-Bolts and threaded rod is most common type available
- INTERNAL THREADS Easy-removabilityWORKS IN MOST MASONRY MATERIAL-Consistent holding values in wide variety of base materials
- REQUIRES THE USE OF A SETTING TOOL-Setting tool allows for proper positive expansion of the anchor
Description
Applications
The anchor is made from Anchor Body Antimonial Lead Alloy/Cone Zamac Alloy. This anchor is designed for use in Concrete, Block, and Brick.
Environment
The anchor is designed for use in a Moist environment.
Head Style
The anchor is a head
Hole Diameter/Bit Diameter
The anchor requires a 1/2″ hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.
Driver Required
A is required for driving the anchor into the base material.
Diameter of Anchor
The diameter of the anchor is 1/4″.
Length Anchor
The length of the anchor is 7/8″
Thread Length
The length of the threads on the anchor is in length.
Minimum Embedment
The minimum anchor embedment into the concrete is 7/8″. Therefore, the anchor must be installed so that a minimum of 7/8″ of the anchor is embedded into the concrete.
Maximum Fixture Thickness
The maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is . This will ensure that the minimum embedment of 7/8″ will be met.
Fixture Hole Diameter
The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 1/4″ diameter anchor requires the hole in the fixture to be 9/16″.
Spacing between Anchors
Each anchor must be spaced a minimum distance of 5″ from each other when measured center to center.
Edge Distance
It is very important not to install the anchor any closer than 2-1/2″ from an unsupported edge of the concrete.
3. Simpson Structural Screws SD9112R500 No.9 by 1-1/2-Inch Structural-Connector Screw, 500-Pack
Feature
- 1/4-Inch Hex Head drive reduces cam-out for easier installation
- Shank is specifically designed to match the fastener holes in Simpson Strong-Tie connectors
- Optimized heat treated for strength
- Mechanically-galvanized coating meets ASTM B695 class 55
- Connectors installed with SD screw code listed under ICC-ES ESR-3096
4. Simpson Strong Tie SPS25344-KT Storm Panel Screw, 305 Stainless Steel, 25 Screws, Wing Nuts and Caps and 1 Hex Driver Bit, 1 Carbide Drill Bit
Description
Product Description
Ideal for attaching storm panels to wood, concrete and masonry
From the Manufacturer
Ideal for attaching storm panels to wood, concrete and masonry
5. Hard-to-Find Fastener 014973281267 281267, 1/4-20″, 12 Anchors
Description
We stock a wide variety of fasteners ideal for many applications around the home, farm, business, automotive, and in industry. Most of our fasteners have a light zinc plating over steel giving a more rust resistant finish. We also sell coated and stainless products for additional rust resistance. We stock many grades of fasteners ranging from low carbon steel on up to hardened, heat treated steel. Not all fasteners are applicable for all applications so be certain to test thoroughly and get the opinion of a licensed builder or certified building or structural engineer before relying on these fasteners for any situations where failure would result in damage to property or person.
6. Simpson Strong-Tie SD10112R500 #10 x 1-1/2" Structural Screw 500ct
Feature
- 1/4-Inch Hex Head drive reduces cam-out for easier installation
- Shank is specifically designed to match the fastener holes in Simpson Strong-Tie connectors
- Optimized heat treated for strength
- Mechanically-galvanized coating meets ASTM B695 class 55
- Connectors installed with SD screw code listed under ICC-ES ESR-3096, Imported
Description
Product Description
Simpson Strong Tie SD Structural-Connector Screws are designed to be used with Simpson Connectors for both interior and exterior applications.
From the Manufacturer
Simpson Strong Tie SD Structural-Connector Screws are designed to be used with Simpson Connectors for both interior and exterior applications.
7. Simpson Structural Screws SD10112R100 No.10 by 1-1/2-Inch Structural-Connector Screw, 100-Pack
Feature
- 1/4-Inch Hex Head drive reduces cam-out for easier installation
- Shank is specifically designed to match the fastener holes in Simpson Strong-Tie connectors
- Optimized heat treated for strength
- Mechanically-galvanized coating meets ASTM B695 class 55
- Connectors installed with SD screw code listed under ICC-ES ESR-3096
Description
Product Description
Simpson Structural Screws SD10112R100 No.10 by 1-1/2-Inch Structural-Connector Screw, 100-Pack
From the Manufacturer
Simpson Strong Tie SD Structural-Connector Screws are designed to be used with Simpson Connectors for both interior and exterior applications.
8. The Hillman Group 831491 XL Washered Wing Nut 1/4-20 (1 Pack of 100)
Description
Hillman 1/4-20 100 Pc. XL Washered Wing Nut. Wing Nuts can be used where frequent fastener connection adjustments or removals are needed and can be made quickly and often. Tools are not needed to install this product, to tighten simply turn the nut by hand. This nut has a wing on each side that helps you to tighten the nut without tools. Made of Zinc Die Cast, will not rust or corrode. These nuts have a built in washer. Various sizes available. Includes 1 pack of 100 pieces of wing nut per pack.
9. The Hillman Group 831493 1/4 X 1-1/2-Inch Stainless Steel Hurricane Bolt, 100-Pack
Description
Product Description
Hurricane Bolts are made of strong bad durable stainless steel. They are ideal for installing hurricane panels to storefronts and sliding glass doors. Normally used in conjunction with lead anchors.
From the Manufacturer
Hurricane Bolts are made of strong abd durable stainless steel. They are ideal for installing hurricane panels to storefronts and sliding glass doors. Normally used in conjunction with lead anchors.
10. CONFAST 1/4" x 1-1/4" Concrete Screws 410 Stainless Steel Hex with Concrete Drill Bit for Anchoring to Masonry, Block or Brick (50 per Box)
Description
Applications
The anchor is made from 410 Stainless Steel, and is Silver Climaseal Coated. This anchor is designed for use in Concrete, Block, and Brick.
Environment
The anchor is designed for use in a Moist environment.
Head Style
The anchor is a Hex Washer head and is designed to allow the head to sit on top of the surface of the item being attached.
Hole Diameter/Bit Diameter
The anchor requires a 3/16″ hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.
Driver Required
A 5/16″ is required for driving the anchor into the base material.
Diameter of Anchor
The diameter of the anchor is 1/4″.
Length Anchor
The length of the anchor is 1-1/4″
Thread Length
The length of the threads on the anchor is 1-1/4″ in length.
Minimum Embedment
The minimum anchor embedment into the concrete is 1″. Therefore, the anchor must be installed so that a minimum of 1″ of the anchor is embedded into the concrete.
Maximum Fixture Thickness
The maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 1/4″. This will ensure that the minimum embedment of 1″ will be met.
Fixture Hole Diameter
The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 1/4″ diameter anchor requires the hole in the fixture to be 5/16″.
Spacing between Anchors
Each anchor must be spaced a minimum distance of 4″ from each other when measured center to center.
Edge Distance
It is very important not to install the anchor any closer than 3″ from an unsupported edge of the concrete.
Conclusion
By our suggestions above, we hope that you can found Hurricane Fasteners Leadbrass Screw Anchor for you.Please don’t forget to share your experience by comment in this post. Thank you!
