Top 10 Honeywell Smoke Detector Hardw Ire

Product Description

This First Alert hardwired smoke alarm includes a 9-volt battery backup that continues to protect you in the event of a power failure. The detector features an ionization sensor for detection of smoke and fast-flaming fires, as well as a loud, 85-decibel alarm. One button silences any nuisance alarms, and also tests detector functions, while lights indicate if the alarm detects smoke. The latching alarm indicator automatically identifies which unit initiated the alarm, even after the conditions that set off the alarm have subsided. And an end-of-life signal enhances your safety by letting you know when it’s time to replace the unit. Connect it to compatible BRK or First Alert alarms within a single-family residence. When one alarm is triggered, all connected alarms will sound. There are generally two types of smoke alarms – ionization smoke alarms and photoelectric smoke alarms. Smoke particles of a varying number and size are produced in all fires. Ionization smoke alarms are generally more sensitive than photoelectric smoke alarms at sensing small particles, which tend to be produced in greater amounts by hot, flaming fires, that are consuming combustible materials rapidly and may spread quickly. Sources of these fires may include paper burning in a wastebasket, or a grease fire in the kitchen. Photoelectric smoke alarms are generally more sensitive than ionization smoke detectors at sensing large smoke particles, which tend to be produced in greater amounts by smoldering fires, which may smolder for hours before bursting into flame. Sources of these fires may include cigarettes burning in couches or bedding. For maximum protection, use both types of technology, such as in the Dual Sensor Smoke Alarm, on each level and in every bedroom of your home. Read moreabout choosing the right alarm, where to place home safety products and other fire safety information.

Amazon.com

Introducing the revolutionary BRK 9120 series smoke alarms which have been redesigned from the ground up. They install faster, perform better, and are even smarter than before. All of these improvements help reduce nuisance alarms and save you time and money. BRK Electronics smoke alarms are designed to be easy to install, easy to maintain, and quality-engineered for years of virtually maintenance-free service.

The 9120B AC-powered smoke alarm with battery backup includes these features:

• Ionization sensor which helps detect fast flaming fires that consume combustible materials rapidly.
• 120-volt AC inter-connectable (with maximum 18 compatible devices). The alarm can be interconnected with up to 12 other compatible smoke alarms and six compatible devices like bells, horns, repeaters and door closers. If one unit triggers an alarm, all smoke alarms in the series will sound. Power indicators show which unit in the series initiated the alarm.
• Latching alarm indicator which automatically identifies which unit initiated the alarm.
• Smart technology to reduce nuisance alarms.
• 9-volt battery backup for peace of mind during power malfunction.
• Single test/silence button which both silences a non-threatening alarm or low battery warning and allows you to test the unit’s functionality.
• Perfect mount system including a gasketless base for easy installation and new mounting bracket that keeps the alarm secure over a wide rotation range to allow for perfect alignment.
• Mounting bracket lock for tamper resistance.
• Dust cover to keep unit clean during construction.
• 10-year limited warranty.

All BRK Electronics smoke alarms meet UL 217 standard and are listed with the California State Fire Marshal. They use the new UL mandated repeating 85-decibel alarm horn pattern. 10-year limited warranty. This unit is approved for sale in Oregon after new revisions on law HB2586.–Bree Norlander

What’s in the Box
One smoke alarm, one 9-volt battery, and user’s manual

See all Product description

Product Description

The First Alert SCO5CN Combination Smoke and Carbon Monoxide Alarm features dual sensors to detect both smoke and carbon monoxide in a single device. A photoelectric sensor detects the smoke most often produced by smoldering fires, and minimizes false alarms from cooking smoke or shower steam. Additionally, the advanced electrochemical CO sensor detects carbon monoxide leaks from multiple sources, such as faulty fuel-burning appliances, blocked chimneys, and generators running inside or too close to homes. A loud, 85-decibel siren alerts you to the threat; unique alarm sounds and indicator lights on its face distinguish a smoke warning from a carbon monoxide warning. This carbon monoxide and smoke detector is battery operated, so you don’t need an electrician for installation. Requiring just two AA batteries and featuring an easy-access battery compartment for quick changes, this smoke and carbon monoxide detector has a single button that allows you to silence a false alarm or test the unit. If your carbon monoxide alarm keeps chirping, the battery may be low or weak. On First Alert carbon monoxide detectors, check to see if the battery light is yellow or green. If the alarm is chirping and the light is yellow, it means the battery is low. The way to get a carbon monoxide alarm to stop chirping is to replace the battery.

Amazon.com

Carbon monoxide (CO) is the leading cause of accidental poisoning deaths in America, yet many people don’t know they are suffering from CO poisoning until its too late. Since symptoms of CO poisoning are like the flu, you might not even know you’re in danger at first. That’s why a carbon monoxide alarm is an excellent way to protect your family. It can detect the CO you can’t see, smell or taste in the air.

The First Alert SCO5CN carbon monoxide and smoke alarm uses an electrochemical carbon monoxide sensor-the most accurate technology available. The alarm uses photoelectric smoke sensing technology which is environmentally friendlier and which reduces nuisance alarms, making it ideal for cooking areas. It is also great for sensing slow smoldering fires quickly. The permanent sensors last the lifetime of the alarm. The test/silence button both silences a non-threatening alarm or low battery warning and allows you to test the unit’s functionality. A low battery signal alerts you to replace the battery and end-of-life alarm of three chirps alerts you to replace the unit. Two AA batteries are included. 5-year limited warranty. UL listed. Not available for sale in Massachusetts.–Bree Norlander

What’s in the Box
One combination carbon monoxide and smoke alarm, two AA batteries, and user’s manual. This does not contain voice feature.

Complete Home Protection

According to US data analysis, a family fire begins every 38 seconds. The faster you know about the fire, the sooner you start moving your family, and the smoke alarm at work reduces the risk of home fire deaths by 50%.

Advantage

1.The smoke alarm with test button allows you to test the unit’s functionality. 

2.It features a low battery alert to remind you when to change the battery and has a missing battery guard to ensure that a battery is placed inside the alarm. 

3.The side battery drawer slides open for easy battery replacement. A blinking power indicator on the unit confirms that it is receiving power.

4.The alarm contains an optional pin to lock the battery and unit in place for tamper resistance. 

5.It can be mounted on either the ceiling or the wall and can be used in mobile homes and RVs.

Attention1.The Smoke Detector contains the test button.Flickering power indicator,When the red LED light flashes for 32 seconds, it indicates that the smoke alarm is running normally.

2.When the alarm senses products of combustion and goes into alarm, the red LED will flash rapidly (one flash per second)..The rapid flashing LED and pulsating alarm will continue until the air is cleared or the test button is released.

Specifications: 

1.DC 9V battery operated 

2.Photoelectric chamber for early detection from all directions 

3.Loud>85dB (A) alarm signal @3M 

4.Flash alarm indicator (red LED). 

5.Test button for easy recommended monthly testing

6.Low battery signal 

7.Safety clip feature, does not allow mounting of smoke alarm without battery installed

8.Ceiling mounting 

9.Easy to install with mounting bracket 

10.5 years prodcut life time

The product is a hardwired alarm, also confirm if the wiring polarity is correct and that all wire nut connections are secure. A loose neutral (white wire) connection within the home junction box could prompt a device malfunction. Promote greater household safety with the First Alert 9120B Hardwired Smoke Alarm with Battery Backup. This 120-volt AC smoke detector uses an ionization smoke sensor to reliably detect smoke from hot, fast-flaming fires and alerts you with a loud 85-decibel alarm.

The 9120 Series smoke alarms have been designed to install faster, perform better and be even smarter than before. These improvements help reduce nuisance alarms and save you time and money.