The Best Engenious Directional Long Range

Eugenius EnStation5-AC 802. 11ac wave 2 2×2 Managed Outdoor Wireless Bridge/Access Point (2-PACK)

EnGenius ENH500v3 KIT EnJet Outdoor AC Wave 2 CPE Point to Point/Multipoint Bridge

EnStationAC is a 5 GHz High-Powered, Long-Distance 11AC Wireless Outdoor AP/Client Bridge offering dual-PoE Gigabit ports and a high-gain directional antenna that emits a narrow signal beam for limited interference ensuring stable connectivity, high-bandwidth and 867 Mbps speeds over extremely long distances, extending the network up to 5 miles point-to-point. EnStationAC is engineered with a powerful independent RF interface that offers high-bandwidth and speeds up to 867 Mbps on its dedicated 5 GHz frequency band. This allows the EnStationAC to accommodate 4k Ultra High Definition (UHD) video and heavy multi-application traffic services, extending bandwidth over a wider channel range (80MHz) allowing network managers to fine tune channel usage based on the application. Offering greater flexibility in deployment, the EnStationAC features two Power-over-Ethernet (PoE) 802.3at-compliant Gigabit ports. With its secondary Gigabit PoE-802.3af-compliant port a second device, such as a remote IP surveillance camera or Access Point, can be connected and powered for greater deployment flexibility. These enhanced power options allow the AP/CB and a secondary device to be deployed where power outlets are scarce or unavailable, such as under the eaves of roofs, high atop light poles or in other remote locations. Tethering a series of 2 MP or 5 MP IP surveillance cameras to the EnStationAC’s secondary port gives you “eyes on” places you might not otherwise see – no matter how far away, with significantly better results than traditional, non-tethered wireless surveillance setups. EnStationAC features 26 dBm output power and high receive sensitivity, coupled with embedded high-gain directional antennas that emit a narrow signal beam to deliver stable robust connectivity, optimal bandwidth and high speed data rates of 867 Mbps over extremely long distances – up to 5 miles in clear line-of-sight point-to-point deployments.

EAP225-Outdoor supports simultaneous dual band speed of up to 1200Mbps. Outfitted with the latest 802.11ac Wave 2 MU-MIMO technology, EAP225-Outdoor can communicate with multiple clients at the same time which making it ideal for high density environment. Water proof enclosure. Durable, weatherproof enclosure for outdoor Wi-Fi applications Frequency Range: 2.4-2.4835GHz; Interface Available: Fast Ethernet (RJ-45) Port x 1（Support Passive PoE）; System Requirement: Microsoft Windows 10/8/7/Vista/XP; Wireless Standards: IEEE 802.11n IEEE 802.11g IEEE 802.11b

High Power for Multiple Outdoor Applications
Getting an IP65-rated Weatherproof Outdoor Single Band High Power WN570HN2 Wireless Wi-Fi Booster, you can boost your Wi-Fi signal strength and extend Wi-Fi signal to everywhere. Enjoy fast and stable wireless Wi-Fi signal in library, hotel, mall, factory, community, street etc.

Features and specifications:
– Waterproof and dust-proof enclosure and high temperature durability materials protect it against the harsh outdoor conditions.
– 15KV ESD protection: Built-in ESD protection circuit prevents damage from high electrostatic voltages and ensures a reliable operation.
– 4KV lightning protection: Built-in lightning protection prevents storm/lightning surges.
– Flexible installation with Power over Ethernet (PoE): The PoE power supply simplifies the setup by combining your power and data connection into a single cable. The DC adapter provides power and network access through your home/business router or network connection and combines them into a single RJ-45 connection. This makes outdoor deployment simple and fast.

SPECIAL ATTENTION TO OUTDOOR USE :
Few clients, who have complained about “Speed Lost”, you just need to select a most suitable mode “Access Point” (not “Repeater”) for outdoor use, and using the cat 5e Ethernet cable (Max 60m) to connect your router and Access Point through passive PoE converter, then you will get a Long Wireless Coverage for possible MAX 500m!

If relevant – “it can’t power up”, pls contact us through Amazon mailboxes for getting the latest “firmware”.

To clear data cookies, pls reset the power cycle after one week use. Also, its default IP can’t be change by anybody.

To use this item better, pls download Technical Specification from https://www.amazon.com/dp/B07V3D98KT at bottom directly, and review it very carefully!

Under the AP Mesh mode (in 2.4 GHz), the ENH1750EXT Wireless Outdoor Access Point can be used as a central connection hub for stations or clients that support IEEE 802.11 b/g/n networks. Under this mode, the ENH1750EXT can be configured with the same Mesh SSID and security password in order to associate with other ENH1750EXTs as well as connect with clients under the same SSID and security encryption signatures. The ENH1750EXT supports fast roaming for clients authenticated to a RADIUS server. This means that employees can be constantly connected to the network – whether they are warehouse workers scanning and capturing barcode information, employees on Wi-Fi phone calls while walking to meetings on another part of a corporate campus, healthcare professionals capturing patient information on mobile devices, or security personnel who need uninterrupted video surveillance on a mobile device when they are alerted to and making their way to the location of an incident. The ENH1750 includes a band steering feature which shifts dual band-capable clients to 5 GHz from the 2.4 GHz band, helping to relieve network congestion and maintain optimal data traffic speeds. This means that sensitive applications such as IP camera streams, VoIP (Voice over IP), HD video streaming and large file transfers perform with improved quality and reliability.

TP-LINK’s 2.4GHz 300Mbps 9dBi Outdoor CPE, the CPE210 is dedicated to cost effective solutions for outdoor wireless networking applications. With its centralized management application, it is ideal for point-to-point, point-to-multipoint and outdoor Wi-Fi coverage applications.  Professional performance, coupled with user-friendly design, makes CPE210 an ideal choice for both business and home users. Channel Bandwidth – 5/10/20/40MHz Frequency Range: 5.15~5.85GHz. Note: Available operating frequency may vary depending on the limitations of the countries or regions in which the device is used.; Interface Available: 1 x 10/100Mbps Shielded Ethernet Port (Passive PoE in), 1 Grounding Terminal, 1 Reset Button, 1 AC Jack with Earth Ground, 1 10/100/1000Mbps Shielded Ethernet Port (Power + Data); Processor: Qualcomm Atheros Enterprise 560MHz CPU MIPS 74Kc; Internal Memory: 64MB DDR2 RAM 8MB Flash; Protocols Supported: TDMA Mode (with Pharos MAXtream enabled); System Requirement: Microsoft Windows 98SE NT 2000 XP Vista, or Windows 10 Windows 8 Windows 7 MAC OS NetWare UNIX or Linux., Note: We recommend you to use one of following Web browsers for an improved user experience: Google Chrome Safari and Firefox. IE browsers are not recommended.; Wireless Standards: IEEE 802.11a/n (with Pharos MAXtream disabled)