Top 9 Dewalt 4 Grinder

The DEWALT DWE402 4-1/2″ 11-amp Paddle Switch Angle Grinder features the next generation 11 Amp AC/DC 11,000 rpm motor, which provides the best power to weight/size ratio available (1.8HP). It’s Dust Ejection System provides durability by ejecting damaging dust and debris particles that enter the tool. The oversized brushes provide 2X brush life over previous model (D28402) and the large spiral bevel gear provides long transmission life. This grinder offers a One-Touch guard that allows for 360 degree rotation of the guard with a single action. The Quick-Change wheel release allows tool free wheel removal without need for a wrench. It has a top mounted and protected spindle lock button that maximizes the depth of cut without compromising durability. The uniquely small gripping surface in this power class allows for the best comfort available in this class. It also offers a newly designed side handle which provides excellent ergonomics while oversized threading provides durability. Auto-off brushes shut the tool down when the brushes need replacing to avoid tool damage and a paddle switch with safety lock-off prevents accidental start up. Matching wheel flanges allow the use of common accessories. Includes: (1) 2-position side handle, (1) 4-1/2″ One-Touch (T27) Guard.

The DEWALT DWE4012 7 Amp 12,000 RPM Paddle Switch Small Angle Grinder features a 7.5 Amp AC/DC, 12,000 rpm motor designed for faster material removal and higher overload protection. The One-Touch Guard allows for a single action to adjust the guard; no buttons or levers, just turn the guard to position it. A hex wrench replaces spanner wrench, which makes it more user friendly as a hex wrench is found in most tool boxes if lost. Its low profile, jam-pot gear case increases durability and allows tool to fit into tight spaces, and the Quick-Change Wheel Release allows tool free wheel removal without need for a wrench. This grinder has a 2-position removable side handle provides increased comfort and control. It also offers a slim, ergonomic body design that provides increased comfort in extended use applications. The 5/8″-11 spindle thread accepts a wide range of 4-1/2″ accessories. Includes: 2-position side handle, Depressed center wheel, One-Touch Guard, Hex Wrench.

DEWALT DCG413B 20V XR Brushless 4.5-Inch angle Grinder features a DEWALT Brushless motor which delivers up to 57% more run time over brushed. This single speed motor offers a No load speed of 9, 000 max RPM’s. It has a Paddle swith to operate; the brake is engaged as soon as the Paddle switch is released, bringing the wheel quickly to a stop. This tool also offers a 2-Position side handle for user comfort and convenience. Specifications: wheel diameter 4.5 inches, Arbor size 0.625 inches, metal motor bearings, Paddle switch, single speed. *This is a baretool item, battery sold separately. Includes: 1) angle Grinder.

The DEWALT DWE4011 eatures a 7.0 amp AC/DC, 12,000 rpm motor, which was designed for faster material removal and higher overload protection. The One-Touch Guard eliminates the need for a tool to adjust the guard location; No buttons or levers, just turn the guard to position it. This unit has a hex wrench which replaces the spanner wrench (a hex wrench is found in most tool boxes if lost). It also features a quick-change wheel release that allows for tool-free wheel removal without need for a wrench. As an added bonus, the two-position removable side handle provides increased comfort and control. To make this tool more versatile, the 5/8-inch-to-11-inch spindle thread accepts a wide range of 4-1/2-inch accessories. You will enjoy working with this slim, ergonomic body design as it provides increased comfort in extended use applications.

The DEWALT DWE402W 4-1/2″ Small Angle Grinder with Wheel features an 11 Amp AC/DC 11,000 RPM motor which is designed for faster material removal and higher overload protection. The Dust Ejection System provides durability by ejecting damaging dust and debris particles that enter the tool through the air intake vents. It has a low profile gear case allows access into tight spaces, along with a Quick-Change wheel release that allows tool free wheel removal without the need for a wrench. A One-Touch Guard allows for 360 degree rotation of the guard with a single action, and a paddle switch with safety lock-off prevents accidental start up. The matching wheel flanges allow the use of common accessories. Includes: (1) Grinder, One-Touch Guard, 2-Position Side Handle, Wrench, 4-1/2″ Abrasive Wheel.

The DEWALT DWE4214 4-1/2″ 11amp Angle Grinder Slide features an 11 Amp AC/DC 11,000 RPM motor designed for faster material removal and higher overload protection. It has a dust ejection system which provides durability by ejecting dust and debris particles that enter the tool through the air intake vents. A low profile gear case allows access into tight spaces, and a quick-change wheel release allows tool free wheel removal. This grinder has a One-Touch guard that allows 360 degree rotation of the guard with a single action, along with a Lock-On slide switch provides increased user comfort in extended use applications. Matching wheel flanges allow the use of most common accessories.

The DEWALT DWE43116 4-1/2″- 5″ high performance trigger switch Grinder shuts the Grinder off in less than a tenth of a second when a wheel pinch or wheel stall occurs, extending the life of the gears and motor. The dust Ejection system™ technology provides durability by ejecting damaging dust and debris that enter through the air intake vents for extra protection. This unit also comes with 3 different type 27 guards. Specs: 13 amp motor, 9,000 RPM rating, trigger switch, 1700 max watts out, 2.3 HP, tool-free flange system, overload protection, tool weight = 5.7 lbs. Backed by DEWALT’S 3 year limited warranty. Includes: 1) Grinder, 1) side handle, inner and outer flange, 1) 4.5″ type 27 guard, 1) 5″ type 27 guard, 1) 6″ type 27 guard.

The DEWALT DCG412B 20V MAX Lithium Ion 4-1/2″ Cut-Off Tool features a 7,000 RPM motor that provides high power for cutting and grinding applications. A Quick-Change wheel release allows for tool free wheel changes without the need for a wrench, and the tool free guard allows for quick, easy guard adjustments/positioning. It offers a 2-finger trigger switch with lock-off button for convenient activation and easier gripping, along with a 2-position side handle offers greater control, comfort & versatility. Common applications include: Cutting metal, threaded rod, rebar with Type 1 cut off wheels, Finishing metal with wire stringer bead wheels, sanding flap discs, and Grinding metal with 1/8 and 1/4 hubbed or depressed center wheels. Includes: DCG412 Cut-Off Tool, Spanner Wrench, Type 1 (Cutting) Guard, 2-Position Side Handle. This is a bare tool item (battery sold separately).

The DEWALT DWE43113 4-1/2″ – 5″ high performance trigger grip Grinder is powered by a 13 amp motor and equipped with the dust Ejection system technology designed to protect the tool from damaging dust and debris that enters through air intake vents. It has a side handle for an alternative grip, along with a 5″ type 27 guard. This Grinder also features a trigger switch with a ‘lock-on’ option the no-load speed at 9000 RPM, with inner and outer flanges. Specs: wheel diameter = 5″, Spindle size = 5/8-11 inches, 1700 max watts out, tool weight = 5.1 lbs. Backed by DEWALT’S 3 year limited warranty. Includes: 1) Grinder, 1) 5″ type 27 guard, 1) side handle, inner and outer flanges.