Nowadays, there are so many products of cpu oil cooling in the market and you are wondering to choose a best one.You have searched for cpu oil cooling in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings cpu oil cooling which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
800 reviews analysed
1. 4PCS 4010 3D Printer DC Brushless Blower Cooling Fan Oil Bearing with 2 Pin Terminal for Hotend Extruder Heatsinks Makerbot MK7 MK8 CPU Chip Arduino Other Small Appliances Series Repair Replacement
Feature
- ❃❃ Made of high quality plastics with high end bearings, this 3D printer part cooling fan can run continuously for days at high speeds without hassle or concern.
- ❃❃ Size: 40*40*10mm / 1.57*1.57*0.39in
- Speed: 6000RPM
- Noise: 27dBA
- DC12 / 24V
- Working Current: 0.06A / 0.08A
- Air Flow: 5.75±10% CFM
- Power: 0.96W
- Cable length: Approx 28cm / 11in.
- ❃❃ Cable connector is already fitted and product is out-of-the-box ready for installation.
- ❃❃ Great replacement item for your all metal hotends or maybe a small cooling fan for your 3D printer nozzle setup.
- ❃❃ Package Including: 4 * 3D Printing Fan. Note: If you meet the fans did not work, you can swap the red and black wires in the plug got it to work. (Any questions, you can contact us and we will give you a satisfied solution!).
Description
This helps to prevent the heat from the nozzle traveling too far upwards.
Without this fan, the filament could get soft above the heater block, which leads to extrusion issues and degradation of print quality.
This is a DC 12V 0.08A cooling fan.
Dimensions are 40mm x 40mm x 10 mm.
Sufficient for use in 3D printing, operating speed is 6000 RPM.
Equipped to properly cool your 3D printer’s extruder assembly, this extruder fan is compatible with the MakerBot Replicator 2 and MakerBot Replicator 2X.
Also compatible with Flashforge, CTC, and other 3D printer types.
Specification:
Rated Voltage: DC 12V
Consuming Current: 0.08A
Connector: 2pin-ph2.5
Speed: 6000 + -10% RPM
Air Flow: 6.5 CFM
Static Pressure: 2.9
Noise Level: 27dBA
Note: Any questions, you can contact us and we will give you a satisfied solution!
Notice!!!
Please check the fan plug, maybe the plug was wired opposite of the fan it was replacing, that is reverse polarity.
2. CBK New Laptop CPU Cooling Fan for MSI GS63VR GS73VR Stealth Pro BS5005HS-U2F1
Description
Compatible Models:
MSI GS63VR Series
GS63VR 6RF, GS63VR 7RF, GS63VR Stealth Pro
MSI GS73VR Series
GS73VR 6RF, GS73VR 7RF, GS73VR Stealth Pro
MS-16K2
MS-17B1
3. 4 PCS 3D Printer Cooling Fan, 40mm x 40mm x 10mm Oil Bearing Cooling Fan with 2 Pin Terminal for Hotend Extruder Heatsinks Makerbot MK7 MK8 CPU Chip Arduino(12V 0.08A)
Feature
- ☀☀ Power Connection: 2 Pin-ph2.5.
- ☀☀ Great replacement item for your all metal hotend or maybe a small cooling fan for your 3D printer nozzle setup.
- ☀☀ Two terminal cable length is 110 centimeters (110cm). Connector is already fitted and product is out-of-the-box ready for installation.
- ☀☀ Made of high quality plastics with high end bearings, this 3D printer part cooling fan can run continuously for days at high speeds without hassle or concern.
- ☀☀ Size:40mm*40mm*10mm(L*D*H), Speed:6000RPM, Noise:27dBA, Bearing: oil, DC 12V, 0.08A.
4. Jienk 8025 Silent Brushless Cooling Fan 2 Pin Brushless 8CM Fan 80mm X 80mm X 25mm Cool 3D Printer Parts PC Case CPU Cooler Oil Bearing (DC 12V)
Feature
- RELIABILITY: The fan adopts quiet oily bronze sleeve bearings, silicon steel sheet and enameled wire, which has higher reliability
- Lifetime is up to 30,000 hours.
- HIGH STRENGTH:The outer frame and blade are made of PBT high-toughness material, which is injection-molded in one time, not easy to deform and break.
- Not Easy to Accumulate Dust: The surface is treated by frosting, not easy to stick gray.
- EASY TO USE: DC 12V 0.23A powered with 2mm pitch 2 pins connector easy to be connected with your computer motherboard or 3D printer power system.
- APPLICATIONS: Widely used in 3D printers, fax machines, banner machines, medical instruments, automotive electronics, computer accessories, electric power, electric vehicle chargers, network cabinets, communication, inverters, transformers, industrial control, Humidifier,Stage lighting, new energy, engines, instrumentation, or anywhere & electronic that need to cooling.
Description
This 8025 DC 12V brushless fan uses spiral fan blades to gather wind, which can accurately dissipate wind to your equipment, protect your equipment, and reduce the damage caused by the equipment due to high temperature.
Technical Specifications:
Rated Voltage : DC 12V
Rated Current : 0.23A
External Material : Plastic
Power Wire Number : 2 Wires
Blades: 7
Main Color : Black
Motor Model : Brushless Motor
Bearing System:quiet oily bronze sleeve bearing
Connector : 2 Pin Connector
Size : 80 x 80 x 25mm/ 3.15″ x 3.15″ x 0.98″ (L*W*H)
Package includes:
1 x 8025 DC 12V BRUSHLESS DC FAN
5. Jienk 7015 Silent Brushless Cooling Fan 2 Pin Brushless 7CM Fan DC 12V 70mm X 70mm Cool 3D Printer Parts PC Case CPU Cooler Oil Bearing (7015 DC 12V)
Feature
- RELIABILITY: The fan adopts quiet oily bronze sleeve bearings, silicon steel sheet and enameled wire, which has higher reliability
- Lifetime is up to 30,000 hours.
- HIGH STRENGTH:The outer frame and blade are made of PBT high-toughness material, which is injection-molded in one time, not easy to deform and break.
- Not Easy to Accumulate Dust: The surface is treated by frosting, not easy to stick gray.
- EASY TO USE: DC 12V 0.12A powered with 2mm pitch 2 pins connector easy to be connected with your computer motherboard or 3D printer power system.
- APPLICATIONS: Widely used in 3D printers, fax machines, banner machines, medical instruments, automotive electronics, computer accessories, electric power, electric vehicle chargers, network cabinets, communication, inverters, transformers, industrial control, Humidifier,Stage lighting, new energy, engines, instrumentation, or anywhere & electronic that need to cooling.
Description
This 7015 DC 12V brushless fan uses spiral fan blades to gather wind, which can accurately dissipate wind to your equipment, protect your equipment, and reduce the damage caused by the equipment due to high temperature.
Technical Specifications:
Rated Voltage : DC 12V
Rated Current : 0.23A
External Material : Plastic
Power Wire Number : 2 Wires
Blades: 9
Main Color : Black
Motor Model : Brushless Motor
Bearing System:quiet oily bronze sleeve bearing
Connector : 2 Pin Connector
Size : 70 x 70 x 15mm/ 2.76″ x 2.76″ x 0.59″ (L*W*H)
Package includes:
1 x 7015 DC 12V BRUSHLESS DC FAN
6. GENNEL 100Gram Tube White Thermal Grease Paste Silicone Compound for PC CPU GPU LED Xbox Cooling
Description
* 100% New.
* Helps disperse the heat from CPU to heatsink effectively.
* Suitable for: CPU heatsink or chip. High temperature resistance
* Non-toxic, tasteless, non-corrosive
* Net Weight: 100g
* Thermal Conductivity: >1.63W/m-k
* Thermal Resistance: <0.249°c-in2 .="">
* Color: White
Package Includes:
* 1x 100g White color thermal grease paste.
7. WINSINN 80mm Fan 24V Brushless 8025 80x25mm for Cooling PC Computer Case CPU Set-top Box Router Receiver DVR Playstation Xbox – 2Pin (Pack of 2Pcs)
Description
►Size: 80x80x25mm
►Rated voltage: DC 24V
►Rated current: 0.21A
►Power: 3.36W
►Speed: 4000 + -10% RPM
►Noise: 28DBA
►Wind volume: 30CFM
—————————————————————————————————————
Package include:
►2 x 8025 24V Fan
———————————————————————————————————————
Product Warranty:
-WINSINN are devoted to offer premium quality products to all cherished customers. Meanwhile supply 60 days money back guarantee and 24 months warranty.
-If there are any questions, please feel free to contact us, WINSINN Customer Service Team will spare no efforts to assist with you within 24 hours.
8. WINSINN 80mm Fan 12V Brushless 8015 80x15mm for Cooling PC Computer Case CPU Set-top Box Router Receiver DVR Playstation Xbox – 2Pin – High Speed (Pack of 2Pcs)
Description
►Oil bearings 8015 Fan (2Pin) – High Speed version
►Oil bearings, use time no more than 16 hours / day. The life expectancy is about 30,000 hours. Lubricating oil is required to maintain the bearing.
►Size: 80x80x15mm
►Rated voltage: DC 12V
►Line length: about 1.18in / 30mm
—————————————————————————————————————
Package include:
►2 x High Speed 8015 12V (2Pin) Fan
———————————————————————————————————————
Product Warranty:
-WINSINN are devoted to offer premium quality products to all cherished customers. Meanwhile supply 60 days money back guarantee and 24 months warranty.
-If there are any questions, please feel free to contact us, WINSINN Customer Service Team will spare no efforts to assist with you within 24 hours.
9. Jienk 2PCS 5015 Silent Brushless Cooling Fan 2 Pin Brushless 5CM Fan 50mm X 50mm X 15mm Cool 3D Printer Parts PC Case CPU Cooler Oil Bearing 7 Blades (DC 24V)
Feature
- RELIABILITY: The fan adopts quiet oily bronze sleeve bearings, silicon steel sheet and enameled wire, which has higher reliability
- Lifetime is up to 30,000 hours.
- HIGH STRENGTH:The outer frame and blade are made of PBT high-toughness material, which is injection-molded in one time, not easy to deform and break.
- Not Easy to Accumulate Dust: The surface is treated by frosting, not easy to stick gray.
- EASY TO USE: DC 24V 0.12A powered with 2.0mm pitch 2 pins connector easy to be connected with your computer motherboard or 3D printer power system.
- APPLICATIONS: Widely used in 3D printers, fax machines, banner machines, medical instruments, automotive electronics, computer accessories, electric power, electric vehicle chargers, network cabinets, communication, inverters, transformers, industrial control, Humidifier,Stage lighting, new energy, engines, instrumentation, or anywhere & electronic that need to cooling.
Description
This 5015 DC 24V brushless fan uses spiral fan blades to gather wind, which can accurately dissipate wind to your equipment, protect your equipment, and reduce the damage caused by the equipment due to high temperature.
Technical Specifications:
Rated Voltage : DC 24V
Rated Current : 0.12A
External Material : Plastic
Power Wire Number : 2 Wires
Blades: 7
Main Color : Black
Motor Model : Brushless Motor
Bearing System:quiet oily bronze sleeve bearing
Connector : 2 Pin Connector
Size : 50 x 50 x 15mm/ 1.97″ x 1.97″ x 0.59″ (L*W*H)
Package includes:
2 x 5015 DC 24V BRUSHLESS DC FAN
10. BXQINLENX 3/8" X 1/2" (9.5X12.7mm) Water Cooling Tubing Hose for PC CPU CO2 Laser Computer Water Cooling System 3.3FT (1M)(Clear)
Description
LENX 3/8″ X 1/2″(9.5X12.7mm) Water Cooling Tubing Hose For PC CPU CO2 Laser Computer Water Cooling System 1M(Clear)
Super smooth,Soft and flexible and Resistance to bending.
Very easy to cut and install to use.
Inner Diameter: 3/8″ (9.5mm) , Outer Diameter: 1/2″ (12.7mm). , Wall Thickness: 3/32″(2mm).
Package:1X1M Tubing
Conclusion
By our suggestions above, we hope that you can found Cpu Oil Cooling for you.Please don’t forget to share your experience by comment in this post. Thank you!
