890 reviews analysed
1. Trim-Lok P-Shaped Rubber Seal – EPDM Foam Rubber Seal with HT (General Acrylic) Pressure Sensitive Adhesive – Door & Window Weather Seal for Homes, Cars, Boats – .5” Height, 1.25” Width, 25’ Length
Feature
- DURABLE EPDM FOAM RUBBER drowns out noise, eliminates vibration, and protects your vehicle, boat, or home from outside elements.
- WEATHER-RESISTANT P-shaped rubber seal provides excellent resistance to water absorption, ozone, sunlight aging, low temperature and compression set.
- EASY TO INSTALL adhesive-backed rubber seals made with two adhesive options: BT (3M) tape is a high-strength automotive-grade tape, while HT tape is a general-purpose pressure sensitive adhesive.
- WIDE RANGE OF APPLICATIONS on marine, automobile, and home cases – providing door, window, and hatch seals for cars, trucks, RVs, trailers, boats, and more!
- SIMPLE AND COST-EFFECTIVE P-seal gaskets reduce heat loss and prevent drafts – making them suitable for door frames and hinged windows and ideal for hatch seals, door seals, piping between the panels on cars and trucks, and more!
Description
| Rubber Seals create an easy-to-close seal against dust, noise, and vibration. To prepare, cut to length with scissors or knife. Prior to installation, ensure bonding surface is properly cleaned with a 50/50 mix of denatured alcohol and water solution.
The P-Shaped Rubber Seals are available with two adhesive application options: high-strength foam acrylic adhesive (BT) and general-purpose pressure sensitive adhesive (HT). The (BT) adhesive creates an airtight seal between the rubber and substrate and has low initial tack for easy repositioning. The (BT) high strength tape system creates the ultimate bond between the rubber and substrate, has the highest peel and shear resistance, and can be used under high loads of stress and force. Also, it has low initial tack for easy repositioning during installation and requires 72 hours of cure time for full bond strength. The general-purpose pressure sensitive adhesive (HT) is ideal for light-duty applications and is best used to hold the rubber seal in place while installed in a static application or compressed between two stationary objects. (HT) may be used in some light duty dynamic applications against a variety of substrates. |
2. Trim-Lok D-Shaped Rubber Seal (Thick Wall) – EPDM Foam Seal w/HT (General Acrylic) PSA System – Ideal Door and Window Weather Seal for Cars, Trucks, RVs & Boats – 0.5” Height, 0.5” Width, 25′ L
Feature
- DURABLE EPDM FOAM RUBBER drowns out noise, eliminates vibration, and protects your vehicle, boat, or home from outside elements.
- WEATHER-RESISTANT rubber D-seals provide excellent resistance to water absorption, ozone, sunlight aging, low temperature and compression set.
- EASY TO INSTALL adhesive-backed rubber seals made with two adhesive options: BT (3M) tape is a high-strength automotive-grade tape, while HT tape is a general-purpose pressure sensitive adhesive.
- WIDE RANGE OF APPLICATIONS on marine, automobile, and home cases – providing door, window, and hatch seals for cars, trucks, RVs, trailers, boats, and more!
- VARIETY OF DIMENSIONS AND SIZES available to fit your application need – allowing for the right size D-shaped seal to be applied to the job.
3. Trim-Lok X105BT-25 D-Shaped Rubber Seal (Thick Wall) – .437” Height, .375” Width, 25 Length – EPDM Foam Seal with BT (3M) High Strength Bonded Tape System, Door/Window Weather Seal for Cars, Trucks, RVs, Boats, 25 feet
Feature
- EPDM FOAM RUBBER SEAL: Trim-Lok D-Shaped Rubber Seal drowns out noise, eliminates vibration, and protects your vehicle, boat, or home from outside elements.
- MANY APPLICATIONS: Durable Trim-Lok Foam Seals can be used for marine, automobile, and home cases – providing hatch, window, and door seals for cars, trucks, RVs, trailers, boats, and more!
- WEATHER-RESIST: These rubber D-seals provide excellent resistance to water absorption, ozone, sunlight aging, low temperature, and compression set. General temperature rating of -20°F to +158°F. It is a reliable weatherstrip seal for many applications.
- EASY INSTALLATION: Adhesive-backed D-shaped seals made with two options: BT (3M) tape is a high-strength automotive-grade tape, while HT tape is a general-purpose pressure sensitive tape. Both offer quick, easy, and efficient installation.
- DIMENSIONS: This weather-stripping adhesive rubber seal measures .437” in height, .375” in width, and is 25’ in length. It is also available in a variety of edge thicknesses and can be cut to fit your specific application.
- Included Components: X105Bt-25
Description
Trim-Lok Rubber Seals create an easy-to-close seal against dust, noise, and vibration. It is a durable option that works in a wide variety of applications including for marine, automobile, and home cases. It is foam weather stripping that provides a reliable seal for RV slide outs, garage doors, boat hatches, car doors, and more. These rubber D-seals provide excellent resistance to water absorption, ozone, sunlight aging, low temperatures, and compression set. It has a general temperature rating of -20°F to +158°F so you can confidently install where needed. It is a reliable weatherstrip seal for many applications. This foam seal comes in an assortment of sizes and models that can be cut to your desired length, so you are sure to find the perfect solution for every application. The Trim-Lok adhesive-backed D-shaped seals are easy to install with two adhesive options: BT tape or HT tape. BT tape is an acrylic automotive grade tape that creates a moisture barrier and airtight seal between rubber and substrate. HT tape has low initial tack for easy repositioning during installation and needs at least 72 hours of cure time before it comes to full bond strength. HT tape is an acrylic-based adhesive used to hold the rubber seal in place during installation; it may be used in some light duty dynamic applications against a variety of substrates. Prior to install, ensure bonding surface is properly cleaned with a 50/50 mix of denatured alcohol and water solution. Trim-Lok seals are designed to work best with a 25-40% compression of bulb’s original height, with 25% being ideal. Compressing seal more than this will negatively impact lifespan/serviceability. Trim-Lok has been a family run business for over 50 years. Made in the USA, we believe that craftsmanship is never something that requires compromise. Our extensive line of edge trim, trim-seal, locking gaskets, foam hand grips & more provide you with solutions for a variety of marine, automobile, RV and home applications.
4. Trim-Lok Rubber Edge Trim – Flexible Neoprene Edge Protector for Sharp and Rough Surfaces – Easy Install, Push-On Edge Guard for Sharp Edges, Cars, Boats, Machinery, and More – Fits 1/16” Edge, 3/8” Leg Length, 25’ Length
Feature
- FLEXIBLE NEOPRENE RUBBER TRIM is highly flexible, manufactured to grip on difficult materials, compound curves and other problematic surfaces
- EASY TO INSTALL push-on edge trim designed to cover sharp, rough edges – providing DIY edge protection on sheet metal, plastic, and other materials
- WIDE RANGE OF APPLICATIONS on marine, automobile, machinery, and equipment cases – including uses on boats, vans, forklifts, golf carts, helmets, playground equipment, and more!
- WEATHER-RESISTANT NEOPRENE material allows for outdoor use – resisting temperatures ranging from -20° to +158° while withstanding moisture, sunlight, oils and gasoline
- VARIETY OF DIMENSIONS available for various edge thicknesses – allowing for a professional trim with a smooth black finish to be applied to a multitude of applications
5. Rubberseal Liquid Rubber Waterproofing and Protective Coating – Roll On White (1 Gallon, White)
Description
Rubberseal is a high end liquid rubber waterproofing product specifically designed to provide an outstanding seal for all types of home and industrial waterproofing applications. Rubberseal White’s Energy Star certification makes this product ideal for roofing applications as it reflects heat off of the roofs of buildings. Roll On Liquid Rubber is a water based, low VOC (Volatile Organic Compounds), cold applied, seamless rubber membrane specifically designed for protecting and waterproofing various household and industrial items. Offering exceptional chemical resistance, puncture resistance and elongation, Rubberseal is a high-end emulsion that exhibits tremendous bond strengths. Rubberseal installs easily by roll or trowel, quickly developing excellent film strength. Rubberseal Roll On provides a sure seal, ideal for a durable waterproof solution in the most demanding service applications.
6. Black U Channel Edge Trim Rubber Seal EPDM 11/32" High x 3/16" Wide (10 Feet)
Description
BLACK U Channel edge trim seal EPDM 11/32″ High x 3/16″ Wide Description Dimensions – 11/32″ High x 3/16″ Wide Fits – 1mm to 2mm material Very hard wearing and washable Easily cut with a sharp knife Very Flexible Use Cars, Boats, Trailers, Seats, Horseboxes – Any material that needs edge protection. Colour Black
7. FLEXTOR Car Door Rubber Seal Weather Stripping Body Mounted (20 Feet)
Description
Flextor Door Seals weatherstrip (body mounted) is the most precise, high-quality reproduction on the market. This is the seal that attaches to the body and helps seal the door when closed Door weatherstripping is designed to keep wind, rain, water, snow, and dirt out which protects the doors and the vehicle from corrosion. Our Door weatherstrip parts and accessories create a tight seal that also means a quiet interior.
8. AutoEC New Weather Stripping Seals the Door Seal Car Noise (Black, 275 Inches,Big D)
Description
AutoEC Weather Stripping Seals–Big D
Product Description:
1. Material: EPDM (EPDM).
2. The product has excellent resistance to heat, cold, UV and other properties.
3. Life as much as 10 years. Under pressure and have strong.
4. U.S. 3M products, with its superb quality and professional features world-renowned. 3M double-sided tape is the top of the tape.
5. 3M adhesive tape to its unique strength and stress dispersion characteristics, and different environmental conditions and itsexcellentplasticizer resistance, formed the best and most lasting effect of actual use.
6. Specially designed Vehicle Sealed Strip can be used on side of car doors, boot, engine, low the wind and the sound of vibration, also can be used on door frame, window, forbid collision in order to make the outside noise low.
Installation:
1. Door frames with mild detergent to wash away the first installation at the stains, dust and oil.
2. The seal of the product package with double-sided adhesive stickers.
3. The end of the protective film seal affixed to the car door ripped determine the location, then follow the installation at the linear synchronous torn protective film, hard paste to ensure proper compression seal can be installed exposed.
4. After pasting a hand to pull the seal ban, ban car washing water on 3 days.Within 24 hours so as not to repeatedly switch the door.
5. After construction closed a bit tight, please do not worry, in the first 2-3 days when you can normal.
6. Let us 1-2 days in a period of more attention to the door is not closed, safety first.
Package includes:
1 x Car seal strip
Conclusion
By our suggestions above, we hope that you can found Black And Decker Bl2500s Rubber Seal for you.Please don’t forget to share your experience by comment in this post. Thank you!
