Finding your suitable readers for aquarium cooling fan sensor is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for aquarium cooling fan sensor including detail information and customer reviews. Let’s find out which is your favorite one.
817 reviews analysed
1. Inkbird ITC308S Temperature Controller for Aquarium with Submersible Probe, Heating Cooling Outlets Thermostat for Heater and Cooling Fans
Feature
- Temperature Control Mode: On/Off Control. Cooling and Heating control.
- Fully submersible probe. Aquarium probe works better in water than standard probe.
- Temperature calibration
- Over-temperature and sensor fault alarm. Dual display window, be able to display measured temperature and set temperature at the same time.
- Maximum output load: 1200W (110V).
- It’s an all in one, simple solution providing control of cooling and heating.
Description
Specification:
Temperature Control Range: -50~120 °C / -58~248 ° F
Temperature Resolution: 0.1°C / 0.1°F
Temperature Accuracy:±1°C (-50~70°C) / ±2°F (-58~160°F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V~240V AC
Buzzer Alarm: High and Low Temperature Alarm
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Body Dimension: 140x68x33mm (5.5×2.7×1.3inch)
Socket Dimension: 85x42x24mm (3.3×1.7x1inch)
Ambient Temperature: -30~75°C / -22~167°F
Storage Temperature: -20~60°C / -4~140°F
Humidity: 20~85% (No Condensate)
Warranty: 1 Year
Package Included:
1x Temperature controller ITC-308S with Aquarium Probe
1x Manual
2. Inkbird ITC-308S Aquarium Heating and Cooling Dual Stage Temperature Controller Freshwater Saltwater Aquarium Tropical Fish Ornamental Shrimp
Feature
- ????????【Heating and Cooling】Controls both a heating and cooling/refrigeration device at the same time. This controller can also be used to easily control a single heating or cooling device.
- ????????【Applicable Scene】Because it has the powerful function of corrosion protection, it is very suitable for fresh water, sea water aquarium, coral cylinder, ornamental shrimp and tropical fish.
- ????????【Dual Display Window】Easy to set up,be able to display measured temperature and set temperature at the same time.Provides a temperature display of Celsius or Fahrenheit.
- ????????【Alarm for Safe】High and low temperature alarms,sensor failure alarm. Maximum output load: 1200W(110V).
- ????????【Term of service】Purchase products and get a one-year warranty.
3. KETOTEK KT4000 Digital Temperature Controller Outlet Thermostat, 2 Stage Heating and Cooling Mode US Plug 1100W with Sensor for Homebrew, Aquarium, Incubator, Pet Breeding, Reptiles
Feature
- DUAL RELAY OUTPUT AND TWO TEMPERATURE SETPOINT. Can be connected with refrigeration and heating equipment at the same time. One setpoint for heating and one for cooling. Automatic conversion of cooling and heating. Maximum output load 1100W ( 110V)
- BLUE BACK LIGHT LCD SCREEN WITH EXTRA SMALL ICONS DISPLAYING. Display can be saw clearly at night or under strong light. And the working state of temperature controller can be clearly known that it is heating, cooling, temperature alarming or none.
- GREAT SENSOR WITH HIGH SENSITIVITY UNDER 1℉ ACCURACY. It can quickly identify the real-time temperature, no matter temperature is in rising or dropping, for reducing accumulated temperature error after equipment stopped. The thermostat sensor is waterproof and made from plastic, it can work well in humid conditions without rusting.
- SECURE POWER CABLE. Double insulated wire with pure copper core and anti-flaming insulator, it is hard to be hot, safe and durable.
- USEFUL ADDITIONAL FUNCTIONS. Temperature calibration, cooling delayed, over-temperature and sensor fault alarm. To avoid displaying the wrong temperature, refrigerator damaged and temperature exceeded.
4. AC Infinity AIRCOM T9, Quiet Cooling Fan System 17" Top-Exhaust for Receivers, Amps, DVR, AV Cabinet Components
Feature
- A quiet fan system designed for cooling receivers, amplifiers, DVRs, and other AV components.
- Protects components from overheating, performance issues, and shortened lifespans.
- LCD thermostat programming with six speed controls, alarm alerts, failure triggers, and memory.
- Contains three dual-ball bearing fans with PWM-controlled motors to minimize noise.
- Dimensions: 17 x 13.5 x 1.5 in. | Exhaust: Top | Airflow: 210 CFM | Noise: 21 dBA
Description
Overview
A quiet cooling fan system designed to be placed on top of AV components such as receivers, amplifiers, and DVRs. Maintaining an optimal temperature for components prevents overheating, ensures constant performance, and extends their lifespan. The LCD digital controller on the front of the system features a smart thermostat with speed control and status alerts. The steel enclosure houses three dual-ball bearing fans that pulls heat out of the component and exhausts upwards. Its slim low-profile design enables the unit to fit in tight spaces. On the backside are ports to connect and control additional fans. Includes corded power adapter to plug the fan system through an outlet.
Intelligent Programming
Programming includes an easy-to-use thermostat and a SMART mode that automatically adjusts the fan’s speed to react to varying temperatures. Additional features include alarm alerts, fan failure triggers, power savings setting, display lock, and backup memory. Six fan speeds are available with three screen brightness settings. Behind the unit are ports that can control up to six individual AC Infinity AIRPLATE Cabinet fans and MULTIFAN Component fans.
Design and Construction
Each system features dual-ball bearing fans rated at 67,000 hours and are certified by CE and RoHS. Fans contain a PWM-controlled motor used to minimize noise during speed variations and are suspended in mid-air with silicone mounts to absorb vibrations. A low-profile design allows the unit to fit in applications with a limited height clearance. Aluminum and steel construction enables additional components up to 30 pounds to be stacked on top.
5. AC Infinity AIRPLATE S5, Quiet Cooling Fan System 8" with Speed Control, for Home Theater AV Cabinets
Feature
- An ultra quiet fan system designed for cooling cabinets that requires minimal noise.
- Features a multi speed controller to set the fans speed to optimal noise and airflow levels.
- Contains a CNC machined aluminum frame with a modern brushed black finish.
- Powered by wall outlet or USB port, included Turbo Adapter increases performance by 25 percent.
- Dimensions: 8.5 x 4.4 x 1.3 in. | Total Airflow: 52 CFM | Total Noise: 18 dBa | Bearings: Dual Ball
6. Coolerguys Quiet AC Powered Receiver/Component Cooling Fan Kits (120mm)
Description
Silent and simple, just plug in and place on or near the component that needs cooling, uses standard 110v AC 2 prong outlet for power but uses a reliable yet quiet DC fan.
Comes with (4) rubber feet to keep the fan from moving and scratching components.
Help prevent your receiver, dvr, console or other component from overheating which can lower life expectancy.
As always all of our parts come with a 3 year replacement warranty, the fan uses dual ball bearings which have a 50,000 life expectancy @ 40C (104F) which equates to nearly 6 years of continuous usage
Fan has 12″ tail, power supply has 48″ so you can place the fan upto 60″ (5ft) away from the AC outlet
Includes:
Coolerguys Ultra Quiet 120x25mm 5 Volt Fan with 4pin Connector : 840556087908
(4) Adhesive backed rubber pads : 840556096917
CG 110V AC to 5V DC Power Supply with 4 Pin Molex (500mA) 4ft power cord: 840556087885
(4) Nylon Multi-Purpose zip ties Black
Fan Specifications:
Dimensions 120x120x25mm
Voltage: 5VDC
Current: 0.23A / 1.15W
Max Static Pressure: 1.85mmH2O
Connector: 4 pin
RPM: 1200 +/- 10%
Air Volume: 45.2 CFM
dB: 19.7
Bearing: Dual Ball
Life Hours: 50,000 @ 40C
Tail is 12 inched wrap sleeved 2/wire.
Not compatible with our thermal control units
7. Inkbird ITC-308 Max.1200W Heater, Cool Device Temperature Controller, Carboy, Homebrew, Fermenter, Greenhouse Terrarium Temp. Control
Feature
- [Convenient Design] Plug and play design, easy to use. Support °C/°F display.
- [Dual Relay Output] Be able to connect with refrigeration and heating equipment at the same time.
- [Dual Display Window] Be able to display measured temperature and set temperature at the same time.
- [Buzzer Alarm] High and low temperature alarms are available when the temperature is over or the sensor is with issue.
- [Warranty & Safe] Warranty: 1 year. Maximum output load: 1100W(110V). It is with temperature calibration and compressor delay which can protect your refrigeration.
Description
Specification:
Temperature Control Range: -50~99°C / -58~210°F
Temperature Resolution: 0.1°C / 0.1°F Temperature Accuracy: ±1°C (-50~70°C) / ±1°F (-50~160°F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V~240V AC
Buzzer Alarm: High and Low Temperature Alarm
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Body Dimension: 140x68x33mm (5.5×2.7×1.3inch)
Socket Dimension: 85x42x24mm (3.3×1.7x1inch)
Ambient Temperature: -30~75°C / -22~167°F
Storage Temperature: -20~60°C / -4~140°F
Humidity: 20~85% (No Condensate)
Warranty: 1 Year
Package Included:
1x ITC-308 Temperature Controller
1x Manual
8. bayite Temperature Controller BTC201 Pre-Wired Digital Outlet Thermostat, 2 Stage Heating and Cooling Mode, 110V – 240V 10A
9. Coolerguys Pre-Set Thermal Controlled Cooling Kits for Cabinets, AV, and Components (Single 120mm, Thermal Plastic)
Conclusion
By our suggestions above, we hope that you can found Aquarium Cooling Fan Sensor for you.Please don’t forget to share your experience by comment in this post. Thank you!
