The Best Magicmount Magnetic Dash

Quick, Convenient and Hands-Free; the MagicMount is a new magnetic mounting system for conveniently mounting your smartphone and devices to the dashboard in your car, truck, boat or RV. Lock your smart device in place with this Scosche dash mount featuring a 4-Axis adjustable angle ball joint neck with lock for mounting in portrait or landscape orientation for optimal viewing from any seat. The integrated cable clips let you neatly connect your cables to the back of the mount keeping cables out of the way. Its cradle-free design eliminates the need to tighten around your device, just hover your device near the magnetic surface and it instantly locks securely in place. These powerful neodymium magnets hold your phone and device securely in place even on the bumpiest roads and are 100% safe. Full wireless compatibility: with the proper MagicPlate placement on your iPhone, Android smartphone or other Qi-compatible devices without any interference with your existing wireless charger. The low-profile mount safely attaches to your dashboard using the automotive grade adhesive ensuring for optimal mounting. The magnetic connection allows you to rotate seamlessly between portrait and landscape orientation in a snap.

WizGear Universal Stick On Magnetic Car Mount Holder Black, 2 Pack

Setting up your phone on a mount in your car has never been easier! WizGear Air Vent Car Mount for Smartphones saves you the hassle of placing your smartphone securely to make sure it doesn’t fall, just stick it on your car dashboard! The WizGear Air Vent Mount features a magnetic technology, which means your smartphone will be secure and have no chance of falling. When a phone is secure in place, it becomes easier to use for GPS navigation too.

Features
1) This magnetic car mount for cell phones is not bulky or space consuming at all. You no longer have to suffice for keeping your phone in the cup holder or dashboard, because a normal car mount gets in the way. This magnetic car mount sticks on a dashboard, thereby not blocking your windshield or Air Vent.

2) Navigation is extremely easy with this magnetic car mount. It can easily rotate, fix, or tilt to any angle that best assists the viewer of the phone.

3)The magnetic technology is safe to use, and will not harm any smartphone. The carbon steel plates inside the magnetic car mount are ultra thin and designed in a way that it provides powerful holding power as well as absorbing magnetic instability. Along with being safe, it is also powerful, it attracts any phone to it quickly – this is the swift snap feature. The user can just bring the phone near the mount and it will take it easy, so the user no longer has to fuss about safe keeping their phone

Instructions how to set up the Mount
1)First clean up the surface on the mounting place.
2)Peel off the sticker from the mount and stick it on.
3)Place the magnet metal plate in your case between the cover and the phone, Or stick on the round magnet metal on your phone or GPS
3) And your phone is good to go!

Flepow Magnetic Car Phone Mount Holder is an ideal companion on the road with powerful magnetic force and an perfect car interior decoration with exquisite craftsmanship.It is absolutely safe and reliable for the cellphone, tablet and GPS. Place your device within easy reach of your arm, allowing you to concentrate on the road with minimal distraction. Small but mighty, this tiny car phone holder is your best choice!

Features:

1.Extra magnetic made your device ( phone tablet GPS )safe because they were locked into place ;

2.Innovative 3M bond adhesive technology sticks strong against any smooth surface but leaves no marks. No Matter where you are,office,home ,kitchen etc ,your phone is always at hand;

3.Universal:Fits any phone ,GPS or Tablet (under 10”) anywhere as long as it has flat surface;

4.Installing our magnetic car mount inside or outside of your case ,looks awesome and performs better .No cradles, clamps or suckers, just the magic of the magnet;

5.360°rotation adjustable magnetic phone holder allows you adjust it to any viewing specification,only need 1 hand 1 second;

6.The Minimalistic stylish design take up minimal space,fits all the car;

7.Free your hands: Have it ,free your hands when you driving ,running,watching ,shower or busy do any other thing.

Installation Tips:

1.Clean smooth surface with cloth until it was fully dry ;

2.Install the magnetic car mount and press it into position for 10 seconds;

3.Please use it after 24 hours.

Note:

1.Please remove the metal plate when you use wireless charging;

2.Apply a few drops of rubbing alcohol before removing,it won’t leave marks.

NOTE:
1,Please don’t stick the 3M stick adhesive pad on very soft, rugged, texture,grease surface or leather surface.
2,Please remove the residual glue and clean the surface.
3,The 3M VHB adhesive pad is one-time use.please sealed preservation.
4,It is Recommended to wait at least 24 hours after stuck before using.The longer the adhesive time, the stronger the viscosity will be.
5,Peel off the yellow protective film and press it at least 2 minutes then wait for about 2 hours before peel off the other side red film.If the red protective film is hard to peel off, please press it back once and try to peel off it again, don’t touch the gel with your hand after peel off.

Easy installation：
Step 1,Remove the residual glue.
Step 2,Clean&dry the car phone mount base completely.
Step 3,Tear off the yellow protective film.
Step 4,Stick it on the car phone mount base and press it at least 4 minutes for better connecting to the base,then wait for about 2 hours to tear off the other side red film.
Step 5,Clean and dry the smooth and hard flat surface thoroughly to ensure there is no dust or debris.
Step 6,Tear off the other side red protective film,Then stick it on the cleaned dash surface firmly and press it at least 5 minutes to ensure that the adhesive pad and the surface fully bond.It is recommended to wait for at least 24 hours before use.
If you hard to tear off the red protective film, please press it back ,then tear off it again.Don’t touch the gel with your hand after peel off the film.
Package include:
4 X 3M VHB adhesive pads
1 X use manual

Strong Magnetic force
6 pieces of N45 magnets form a strong magnetic field, much stronger than normal magnets, ensuring your device stays more secure while driving.
360 Degree Rotation
The innovative ball joint allows for full rotation to assure optimal viewing angle including vertically or horizontally.
Adjustable and Extendable Telescopic Arm
The telescopic arm is extendable,the length of telescopic arm is between 4.6”/11.7cm-6.29”/16cm(include magnet head)and the tilt angle could be adjusted for 240 degree for optimal viewing angle.
No more screw to adjusting,just pull and push to adjust the length.Easy one hand operated!
Super Sticky Suction Cup
Industrial-strength suction cup along with sticky gel pad layer make sure the mount attaches well to the dashboard or windshield and stays put even on the bumpiest roads!
*The suction cup can be restored in good condition by simply rinsing under running water and air dry.
Wireless Compatible
With the proper plate placement magnets will not interfere with Qi Wireless Charging Phones.
Easy to Installation:
Place the car mount on the optimum position and then press down the “LOCK” lever. 
*Note: 
– Clean the dashboard or windshield surface thoroughly to remove any dust or debris before installing the car mount.
– If the surface of your car’s dashboard is not smooth, but textured ,please use the 3M dashboard pad (Please note the 3M dashboard pad is one-time use) .
-The suction cup may not compatible with the leather, vinyl and soft style dashboard.Recommend that to mount it on the windshield for stronger hold if your car’s dashboard surface is leather or vinyl or soft.
-Magnetic mount Caution: This magnetic mount is not a toy. The small magnets are harmful if swallowed. Keep away from children.
Package includes:
1 x Suction cup magnetic car phone mount 
2 x Metal plate  (1 Rectangle,1 Rounded)
1 x Cat Shape Metal Plate
1 x Dashboard Pad
1 x Manual

WizGear Universal Air Vent Magnetic Phone Car Mount Holder Phone Holder For Cars Setting your cell phone in a car mount in your car has never been easier! WizGear Air Vent Car Mount for smartphones saves you the hassle of placing your smartphone securely to make sure it doesn’t fall just push it into the air vent ! The WizGear Magnetic Air Vent Mount features a magnetic technology, which means your smartphone will be secure and have no chance of falling. When a phone is secure in place, it becomes easier to use for GPS navigation too.
Features
1) This phone magnetic car mount holder for cell phones is not bulky or space consuming at all. You no longer need to suffice for keeping your phone in the cup holder or dashboard, because a normal car mount gets in the way. This magnetic car mount inserts into the Air Vent, thereby not blocking your windshield. 2) Navigation is extremely easy with this magnetic car mount. It can easily rotate, fix, or tilt to any angle that best assists the viewer of the phone. 3) The magnetic technology is safe to use, and will not harm any smartphone. The carbon steel plates inside the magnetic car mount are ultra thin and designed in a way that it provides powerful holding power as well as absorbing magnetic instability. Along with being safe, it is also powerful, it attracts any phone to it quickly – this is the auto-mount feature. The user can just bring the phone near the mount and it will take it easily, so the user no longer has to fuss about with safekeeping their phone
Instructions how to set up the Car Mount
1)Insert the mount in the Air Vent Mount in your car.
2) Place the magnet metal plate in your case between the cover and the phone, Or stick on the round magnet metal on your phone or GPS
3) And your phone is good to go!