The Best Generator Interlock Ge

Convert an existing load center into a generator panelFor use with a 150 – 225 Amp PowerMark Gold main breaker load center with a left-right handle orientation and a back-fed branch breaker mounted at top rightEnsures that the main breaker is in the off position before the branch breaker is back-fed from the generator for safetyUL listedNEC compliantIncludes stainless-steel interlock device, auxiliary main breaker retainer, assembly hardware, hole drill template and critical circuit identification labels

Product Description

The Reliance Controls Corporation 6-circuit 30 Amp transfer switch is a complete turn-key kit with everything needed to make a professional transfer switch installation in a home or office. It is designed to enable the wiring system of the building to accept the full power of a portable generator, which can run multiple electrical appliances and devices during a power outage. Use this transfer switch for up to 7,500-watt generators equipped with NEMA L14-20 or L14-30 power outlets. The kit includes a 30A 6-circuit prewired loadside reliance transfer switch with wattmeters; 30 Amp outdoor power cord inlet box, a 30 Amp 10-foot generator power cord with L14-30 ends, and an extra L14-20 cord end for smaller generators. This unit is cUL1008 listed and is covered by a 5-year warranty and ships in a plain white recyclable box.

Amazon.com

The Reliance Controls Corporation 6-circuit 30 Amp transfer switch is a complete turn-key kit with everything needed to make a professional transfer switch installation in a home or office. It is designed to enable the wiring system of the building to accept the full power of a portable generator, which can run multiple electrical appliances and devices during a power outage. Use this transfer switch for up to 7,500-watt generators equipped with NEMA L14-20 or L14-30 power outlets. The kit includes a 30A 6-circuit prewired loadside reliance transfer switch with wattmeters; 30 Amp outdoor power cord inlet box, a 30 Amp 10-foot generator power cord with L14-30 ends, and an extra L14-20 cord end for smaller generators. This unit is cUL1008 listed and is covered by a 5-year warranty.

Mfr Brand Name: SQUARE D / Catalog No.: HOMCGK2C / Product Name: SQUARE D HOMCGK2C N 240V 2P HOMB NEW / Breaker Type: HOM / Volts: 240 / Poles: 2

Indoor Generator Interlock Kit; Used On Qom2 Main Circuit Breaker

The Reliance Control Pro/Tran 30-Amp Indoor Transfer Switch is easy to install and operate. The purpose of a transfer switch is to connect a secondary power source, like your generator, to circuits in your home or building that are wired into the electrical system. It is designed to enable the wiring system of the building to accept the full power of a portable generator, which can run multiple electrical appliances and devices during a power outage. The transfer switch ensures that you can safely use back up power during a power outage without having to worry about back feeding the utility line. In an emergency situation you might not think to shut off the main power source, the transfer switch makes it so you do not have to worry about that. Each individual circuit can be transferred separately and only as needed. This transfer switch features 6 15-amp single pole circuit breakers and 4 20-amp single pole circuit breakers. The recommended cord size for this switch is a 10-gauge cord. Since 1909, Reliance Controls Corporation has contributed more innovations that any other single manufacturer and has been awarded over 85 patents on manual transfer switches, time switches and accessories. Reliance Controls Corporation specializes in the manufacturing of a wide variety of electrical products. The primary product line consists of heavy duty time clocks and controls, generator accessories, transfer switches and transfer panels for portable generators and inverters. And after over a century of innovation, Reliance Controls Corporation has built an enviable reputation for high quality, superior engineering and exceptional customer service.

UL & CSA compliant. The EZ Generator Switch is a single-circuit 15 Amp, 125-volt transfer switch in the generator position and 20 amp rated in the normal position. It controls heating systems, lighting circuits, convenience outlets, refrigerators, sump pumps, and 120-volt well pumps. We are also compatible with SOLAR SYSTEMS and INVERTERS. The unit is completely pre-wired and comes with 24-inch leads, wire nuts, back box, and directions / wiring diagram to connect to circuit panels or equipment. During a power outage, simply plug your extension cord (12 gauge cord recommended and only the length you need) from your generator into the EZ Generator Switch and place the switch into the ‘Generator’ position. No worrying about back-feeding or messing with breakers. When the power resumes, simply place the EZ Generator Switch back into the ‘Normal’ position. Our switch is Universal and can be converted for both types of generators (bonded or floating neutrals) in less than 2 minutes, in addition we provide full support. Never purchase a transfer switch that has not been tested/approved by UL & CSA

The Champion Power Equipment 48036 25-Foot 30-Amp 125/250-Volt Generator Extension Cord changes your L14-30R locking outlet to four 5-20R household outlets. Whether you’re powering your essential items during an emergency or powering up your tools in remote locations, Champion’s 25-foot extension cord can be depended upon in any situation. Designed in a fan-style configuration, this cord includes dust covers to keep your outlets clean and protected when not in use. Ideal for quick and dependable use of power, this 25-foot, high-capacity 10-gauge wire is surrounded by durable, outdoor-rated insulation (SJTW). Featuring a heat and cold resistant thermoplastic jacket, you can be sure your power cord will remain flexible and function perfectly whether the temperature outside is extremely hot or extremely cold. Champion’s convenient extension cord is rated for use with 125/250-volts and extends 30 amps of generator power where you need it. The 25-foot long cord allows you to run your generator from a safe distance, protecting you and others from noise and hazardous exhaust. Champion Support and our nationwide network of service centers will back up your purchase with a 1-year limited warranty and FREE lifetime technical support.

Amazon.com

Siemens standby power mechanical interlock kits provide a means to ensure that the main breaker powered by utility power within a panel is forced to the OFF position when standby power is in use. It also ensures that the standby source is forced to the OFF position when the utility power is in use. This model (ECSBPK06) is designed for use on load centers or meter combinations that will accept a QN (MD-T) frame circuit breaker next to a 2-pole circuit breaker. It’s compatible with QP, QNH, and HQN utility main breaker and QP, QPH, and HQPH standby main breaker types.

The most common application for an interlock kits is when a portable generator is used to provide back up power to a building. If the utility main breaker in a panel is left in the -“ON”-position while a generator is powering the panel, dangerous back feeding of the utility power lines can occur.

The ECSBPK06 interlock kit (view larger).

Use on Siemens or Murray panels (view larger).

ECSBPK06 Generator Standby Power Mechanical Interlock

At a Glance

• UL listed for use in most Siemens load centers and meter combinations
• Remains attached to the main breakers when load center cover
• Corrosion resistant finish
• For use on Siemens or Murray panels
• Easy assembly requiring no modifications to the load center or meter combination
• Suitable for use with optional standby systems in accordance with article 702 of the National Electric Code

From the Manufacturer

Siemens standby power mechanical interlock kits provide a means to ensure that the Main breaker powered by utility power within a panel is forced to the OFF position when standby power is in use. It also ensures that the standby source is forced to the OFF position when the utility power is in use. The most common application for these kits is when a portable generator is used to provide back up power to a building. If the utility Main breaker in a panel is left in the -“ON”-position while a generator is powering the panel, dangerous back feeding of the utility power lines can occur. The ECSBPK06 will work on any Siemens or Murray panel that has a QN(H) or MD-T(H) Main breaker. The standby power Main breaker must be a two pole, QP or MP type breaker.