Top 9 Arkon Dash Cam

The GN079WD sticky suction mounting pedestal is compatible with Garmin nuvi 40, 50, 200, 2013, 24×5, and 25×5 Series devices, as well as Garmin nuvi 1450, 1450T, 1490T, 1200, 1250, 1260T, 1300, 1350, 1350T, 1370T, and 1390T models. This mount package includes only the Sticky Suction Mounting Pedestal with 3-inch articulating arm and 17mm ball head, and an optional 3M adhesive dashboard mounting disk. (The above listed Garmin nuvi devices should include a 17mm swivel ball-compatible holder; replacement holders sold separately.) Replace that tired old Garmin suction mount that always falls off with Arkon’s new sticky suction mount. The Sticky Suction Mounting Pedestal is ideal for car dashboards, windshields, and other flat or slightly textured surfaces. The pedestal’s base uses a powerful combination of polyurethane gel and suction to provide a maximum surface bond. The 3-inch articulating arm of the suction mount adjusts vertically and provides 360-degree rotation, providing flexibility in viewing the smartphone from any angle. To install, simply clean the mounting area with the included alcohol pad to ensure an optimum grip, then set the pedestal and push down on the one-touch lever to engage the suction. In order to prevent permanent indentation marks on dashboard surfaces made of soft vinyl, leather, or similar materials, Arkon recommends using the included 3M adhesive mounting disk. While powerfully strong, the sticky suction mount is also easily removable and reusable. If it has a drop in suction, just rinse the pad with a mild liquid soap and warm water, and then let air dry to restore the suction.

The AP013 80mm adhesive mounting disk allows you to mount an Arkon or third-party 70mm windshield suction mounting pedestal to your car’s dashboard, including Arkon’s mounting pedestal models GN079WD-SBH, GN068WD-SBH, GN022-SBH, GN014-SBH, GN015-SBH, and GN042-SBH. (Note that the disc is meant to be a bit larger than the mount to ensure a secure fit.) This package includes only the adhesive disk (mounting pedestals sold separately). To apply the adhesive disk to the car’s dashboard, simply remove the paper backing from the back of the plastic 3M dash mount disc, then place and press down on a previously cleaned surface. (Use included alcohol pad to ensure mounting area is clean and free of any dashboard conditioners or other treatments. For best results, allow 24 hours for the disk adhesive to cure on the dashboard before securing the base of the mount to the center of the disk.) While this disk is meant to be a semi-permanent solution, the disk can be removed from the dash by applying a generous amount of rubbing alcohol or similar adhesive removal product to the area with a cotton swab. Let the liquid saturate the area, then work a long piece of dental floss under the disk to cut through the adhesive until the disk is removed. For a 90mm disk to use with 80mm suction mounts, see Arkon Model AP020.

Arkon’s SM428 multi-angle adhesive or screw mount for cars and trucks can be used with all iPhone, Android, and Windows smartphones, including Apple iPhone X, iPhone 8 and 8 Plus, iPhone 7 and 7 Plus, iPhone 6S and 6S Plus, iPhone 6 and 6 Plus, Samsung Galaxy Note 8, Note 5, and Note 4, Galaxy S8, S7, and S6, LG G6, G5, and G4, Nexus 6, HTC One M9, One M8, and One Max, Nokia Lumia 1520 and 1020, Motorola Moto G and Moto X. The universal design of the Mega Grip phone holder accommodates any smartphone having up to 3.25” width with no height restrictions, making it compatible even when used with a large protective case or skin. This mount package includes Arkon’s Mega Grip one-touch push-button phone holder and multi-angle adhesive dashboard mount. The adhesive mount sticks onto the car dash or console, providing a semi-permanent bond. Use the optional self-tapping screws for an even more permanent solution. The phone holder’s unique side-grip technology provides a secure hold for your smartphone. Just set your cell phone in the mount and close the arms to lock in place. A one touch push of the phone holder’s side button releases the phone. The low-profile mount can be raised up and down, moved left to right, and turned 360° for the ultimate flexibility in viewing the smartphone from any angle. Important: Drilling into the dash, floor, or console could permanently damage the vehicle. Use caution and consult a mobile install professional to avoid drilling into the gas tank, electrical system, or other highly sensitive vehicle components.

Replace that tired old Garmin suction mount that always falls off with Arkon’s suction mount. The GN115 windshield or dashboard suction mounting pedestal is compatible with Garmin nuvi devices, including the 40, 50, 200, 2013, 24×5, and 25×5 Series, as well as Garmin nuvi 1450, 1450T, 1490T, 1200, 1250, 1260T, 1300, 1350, 1350T, 1370T, and 1390T models. This mount package includes the Travelmount Deluxe Mini Windshield Suction Pedestal and an optional 3M adhesive dashboard mounting disk. (The above listed Garmin nuvi devices should include a 17mm swivel ball-compatible mount; replacement mounts and holders sold separately.) The Travelmount Deluxe Mini Windshield Suction Mounting Pedestal is ideal for car dashboards, windshields, and other flat surfaces. The mount features a standard suction mount base made of thermoplastic polyurethane (TPU). This type of suction performs well in hot and especially cold climates. The arm of the windshield suction car dock mount adjusts vertically and provides 360° rotation, giving you the ultimate flexibility in viewing the cell phone from any angle. To install, simply clean the mounting area with the included alcohol pad to ensure an optimum grip, then set the pedestal and push down on the one-touch lever to engage the suction. Arkon recommends using the included 3M adhesive mounting disk for dashboard installation.

The CMP214 camera car windshield mount holds smaller digital cameras with the 1/4”-20 mounting pattern, such as the Sony 4K, Action Cam, and POV HD Flash Memory Camcorder, JVC ADIXXION, and JVC ADIXXION Cam 2. This car mount package includes Arkon’s Travelmount Deluxe Mini Windshield Suction Mounting Pedestal with one-touch lever, camera mount adapters, and a 3M adhesive mounting disk (for dashboard mounting). The action camera attaches easily at the bottom of the mount—just screw the camera onto the 1/4”-20 mounting bolt provided. The arm of the suction mount adjusts vertically and provides 360° rotation, giving you the ultimate flexibility in positioning the camera at any angle. This mount uses DEHP-free PVC suction, which performs well in hot climates and is ideal for friendly environment. The Travelmount suction mount can also be used as a dashboard mount by using the 3M adhesive mounting disk. It’s a 2-in-1 camera mounting solution.

The AP036 70mm adhesive mounting disk allows you to mount an Arkon or third-party 60mm windshield suction mounting pedestal to your car’s dashboard, including mounting pedestals for Garmin and TomTom GPS devices. (Note that the disc is meant to be a bit larger than the mount to ensure a secure fit.) This package includes only the adhesive disk (mounting pedestals sold separately). To apply the adhesive disk to the car’s dashboard, simply remove the paper backing from the back of the plastic 3M dash mount disc, then place and press down on a previously cleaned surface. (Allow 24 hours for the adhesive to cure before securing the base of the mounting pedestal to the center of the disk for best results.) While this disk is meant to be a semi-permanent solution, the disk can be removed from the dash by applying a generous amount of rubbing alcohol or similar adhesive removal product to the area with a cotton swab. Let the liquid saturate the area, then work a long piece of dental floss under the disk to cut through the adhesive until the disk is removed. For an 80mm disk to use with 70mm suction mounts, see Arkon Model AP013. For a 90mm disk to use with 80mm suction mounts, see Arkon Model AP020.

The RM6AMPS2T drill base mount is part of Arkon’s Robust Mount Series and mounts to walls or other solid flat surfaces with screws. It holds all smartphones (even with cases) up to 7.5” tall, including iPhone X, iPhone 8 and 8 Plus, iPhone 7 and 7 Plus, iPhone 6S and 6S Plus, iPhone 6 and 6 Plus, Samsung Galaxy Note 8, Note 5 and Note 4, Galaxy S8, S7, S6 edge+, and S6, LG G6, G5, and G4, Nexus 6 and Nexus 5, HTC One M9, One M8, and One Max, Nokia Lumia 1520 and 1020, Motorola Moto G and Moto X. It also holds midsize (7” or 8” screen size) tablets, including iPad mini, Galaxy Note 8.0, Galaxy Tab 3 7.0 and 8.0, Galaxy Tab Pro 8.4, and Google Nexus 7. This mount includes a heavy-duty 4-Hole AMPS mounting pedestal and Slim-Grip Ultra universal smartphone and midsize tablet holder. The spring-loaded holder includes eight support legs (4 short and 4 longer versions) that slide onto the top and bottom of the holder to ensure the right fit for your phone or tablet and keep side buttons and ports unobstructed. The mount uses the 4-Hole AMPS mounting pattern, which consists of four holes located in a rectangular pattern spaced at 30.17mm x 38.05mm (measured as the center-to-center distance between holes). The tough, low-vibration pedestal measures approximately 4.5 inches high from the bottom of the AMPS base to the top of the pedestal (not including the holder) and is made of plastic and nylon. The pedestal swivels on both the top and the bottom, providing 360-degree rotation and flexibility in positioning the device at any angle. The mount can also be screwed directly into the floor of your vehicle. (Warning: Drilling into the vehicle’s floor may damage the vehicle. Use caution and consult a mobile install professional to avoid drilling into any sensitive vehicle components.)

Tightening ring and camera head adapter kit converts 17mm swivel ball pattern to 1/4″-20 threaded camera pattern. Converts Arkon GNxxx series mounts (sold separately) or Garmin Nuvi mounting pedestals (sold separately) for compatibility with digital cameras, camcorders, or sports cameras having the 1/4″-20 threaded female mounting pattern. Adapter only. Not a complete solution by itself.