Top 9 Maytag Dishwasher Brackets For Granite

Comparable to OEM Parts include WP8269145, 8269145, EA393134, AP3039168, PS393134, 830941, AH393134 and many more.

FIXES THE FOLLOWING SYMPTOMS:
Door latch failure.
Door won’t close.

INSTRUCTIONS:
1. Turn off the power and water supply to avoid shock.
2. Open the dishwasher door and use a phillips screw driver to remove the screws that hold the dishwasher to the cabinet.
3. Close the dishwasher door and use it to pull the dishwasher out from the counter top. You only need to pull out far enough to expose the brackets.
4. The undercounter brackets are held in by the bent tabs on the bracket that hold the bracket in place. Straighten out the tabs and slide the bracket out.
5. Slide the dishwasher brackets into the same area you removed the original brackets and bend the tabs to secure the brackets to the dishwasher.
6. Finish by carefully sliding your dishwasher back under the cabinet. Use your provided screws to screw the dishwasher bracket directly to the underside of your counter with a Phillips screwdriver.

WHAT YOU GET:
2 x Dishwasher Mounting Brackets
2 x Mounting Screws

100% CUSTOMER SATISFACTION :
Feel free to contact us if you have any questions or problems with the item

1) Turn off power to your dishwasher in breaker box (ABSOLUTELY CRITICAL TO AVOID SHOCK) 2) Rotate lower access panel fasteners and remove them 3) Remove access panel/sound dampening pad. Determine if the water supply/power lines have enough slack to move the dishwasher. If not, you will need to turn off water supply valve, disconnect water supply line from inlet valve & release power line from junction box 4) Open dishwasher door, remove the screws from the existing brackets (if present) 5) You will next be moving the dishwasher. To do so, you may need to lower the dishwasher by adjusting the leveling legs 6) Carefully pull dishwasher a few inches away from the front of the cabinet 7) Use pliers to pull up tabs in back of the bracket (if present). Pull out old brackets 8) Insert new brackets. Use pliers to adjust the back tab to lock the brackets in place 9) Slide the dishwasher back into the cabinet (readjusting the leveling legs, if necessary). Replace the screws in your new brackets 10) Reverse steps 3, 2 and 1. ALL SET! This is a generic product manufactured and distributed by Impresa Products (TM). This is not a Whirlpool (TM), Sears (TM), Kenmore (TM), Amana (TM), Jenn-Air (TM), Crosley (TM), Maytag (TM), Roper (TM), Magic Chef (TM), Estate (TM) or Inglis (TM) OEM product and Impresa Products has no affiliation with or endorsement from these brands. Our product is not covered under any other manufacturer’s warranty (except for Impresa Products). The Whirlpool (TM), Sears (TM), Kenmore (TM), Amana (TM), Jenn-Air (TM), Crosley (TM), Maytag (TM), Roper (TM), Magic Chef (TM), Estate (TM) and Inglis (TM) brand names and logos are the registered trademarks of their owners. Any use of the Whirlpool (TM), Sears (TM), Kenmore (TM), Amana (TM), Jenn-Air (TM), Crosley (TM), Maytag (TM), Roper (TM), Magic Chef (TM), Estate (TM) and Inglis (TM) brand names, model or any other related designations are made solely for purposes of describing and illustrating compatibility.

Throughout the years there have been many problems with getting dishwashers anchored correctly. Problems also occurred if the dishwasher was not on site at the right time. This led to the design of the E-Z Dishwasher Bracket. The bracket eliminates many of the problems associated with anchoring dishwashers and is great for installation either before or after counter top installation. The feedback from other builders and counter top installers has been very positive. The bracket is easy to install and eliminates callbacks for dishwasher anchoring, which saves time and money.

Easy to install – This dishwasher mounting bracket set is quick and easy to install on most top name brands. This part replaces the following part numbers:665.12776K311, 665.12782K311, 665.12833K311, 665.13173K705, 665.13253K110, 665110739120, 665110739130, 665110739140, 66512723K311, 66513003N510, WP8269145, WP8269145VP, AP3039168, PS393134, 830941, AH393134, EA393134, PS11745496. Fits many models – These mounting brackets are a perfect fit for a variety of Whirlpool, Sears, Kenmore , Amana , Jenn-Air , Crosley , Maytag , Roper , Magic Chef , Estateand Inglismodels, and many other brands. Value pack – This pack of dishwasher mounting brackets will guarantee that your dishwasher will stay in its place in your kitchen. PREMIUM QUALITY- These dishwasher mounting brackets / undercounter dishwasher brackets are made from high-quality galvanized steel and are well-tested by our manufacturer. They meet OEM standards and ensure long-lasting and effective performance. MONEY-BACK GUARANTEE – If you are unsatisfied with these mounting brackets, we will be more than happy to send you a replacement or a refund.

The 24″ E-Z Bracket attaches to the cabinet with wood screws as well as to the counter top with impact absorbing adhesive caulk or silicone. It is made to accommodate virtually any dishwasher on the market and may be installed prior to or after counter top installation. There is no need for the dishwasher to be on site due to the multiple attachment locations. Counter top installers need only install the bracket across the top of the dishwasher bay, flush tabs to face of cabinet and install screws provided at each end.

Description ：

Part number :W10426979

Package contains： (1) Dishwasher Under-Counter Bracket and Screws

Part Number W10426979 replaces ：2311792, AH3632890, EA3632890, PS3632890.

W10426979 fits these common brands made by Whirlpool :

Whirlpool, KitchenAid, Maytag, Amanda, Jenn-Air, Estate, Roper, Admiral, Inglis, Magic Chef and others.

This undercounter mounting bracket for dishwashers is for solid surfaces like granite. Works with all standard size dishwashers. Can also be used on all stainless and plastic tall tub platforms.

Product Features：

1. Contains mounting bracket and screws
2. For use with undercounter mounting application
3. Can be used on most brands
4. For solid surface installation

Please note :

This is an Components Brand replacement part, NOT an OEM product. All mentions of brand names or model descriptions are made strictly to illustrate compatibility.

GUARANTEE : For any reason you’re not completely satisfied, You can request a replacement or full refund within 30 days of receiving the goods.no questions asked