Sized to fit each of our Active Aqua chillers, the kit includes two hose clamps, one replacement fuse and two rubber replacement collars for inlet/outlet fittings.

FREE SHIPPING UPS TO 48 STATES – Chiller Daddy is a high output, heavy duty under sink drinking water chiller for home or office. Great for use with a Reverse Osmosis RO System or under sink drinking water filter system. Easy to install. Whisper quiet 3-way noise suppression system. SUS304 Stainless Steel inside and out. Even the nuts, bolts, screws, washers, cabinet and drain cap are stainless steel. Premium quality in every detail. Chiller Daddy makes perfectly chilled water for big thirsts. Adjustable Water Thermostat 42F – 54F – Factory Preset For Normal Use – Perfectly Refreshing Drinking Water Temperature Range Hygenic Stainless Steel Cold Water Tank, Drain Cap & In/Out Tubes – 100% Stainless Steel Waterway males it the best choice for the high purity of reverse osmosis water Attractive Appliance Grade 304 Stainless Steel “NO-RUST” Exterior Cabinet Long Life, Hermetically Sealed, High Efficiency Compressor Auto Overload Protection – Thermally Protected Motor-Compressor Fast 1.32 GPH Flow Rate – Quick Recovery Dual Evaporator Grid For Silent and Efficient Convection Water Chilling. Conforms to UL Standard 399. Certified to CSA Standard C22.2 #s 60335-2-24 & 60335-1Easy to Install on RO Reverse Osmosis and Filtered Drinking Water Systems. Enough cold water to give you brain freeze on a hot day!

This Active Aqua submersible pumps designed specifically for hydroponic systems. Powerful mag drive construction, removable foam filters and impellers, included indoor/outdoor use. Oil free/environmentally safe. 1-year warranty. Recommended for 40-gallon reservoir. Easy open shroud for filter replacement. Rubber mounting feet reduce vibration. 6-Feet heavy duty power cord. c-UL-us listed. 3/8-inch fitting. 25-Watts, 120-VAC, 25-liter per minute, 120-voltage. 400-GPH, maximum amperage is 0.2. This product weighs 2.6-pound. Measures 8-2/5-inch length by 3-1/2-inch width by 5-4/5-inch height.

Four easy steps for healthier, cleaner water. Franke StillPure under sink complete filtration systems improve the taste, odor and color of water found in your home by removing harmful bacteria, parasites and cysts, chlorine and lead. Simply choose from the expansive line of Franke pre-configured water filtration kits or choose a-la-carte based on your specific needs. Select the Franke water filtration faucet to best match your style needs, add a filter kit, an optional chiller or heater tank and a monitor your usage (with Bluetooth FM100 and smartphone app) to ensure high quality water filtration at all times. For simplistic, minimalist design options, choose a Franke 3-in-1 faucet design to maximize functionality without the clutter of additional faucets. Instant heating and cooling features will help dramatically reduce the amount of waiting time to get your water to the desired temperature. All of Franke water filtration systems are designed to be conveniently installed under your sink for point of use, making adding filtration extremely simple. Additional water supply hoses may be needed to connect to the existing water supply lines. Franke water filtration products are backed by a 5 year warranty, faucets by a limited lifetime warranty, heater and chiller tanks by a 1 year warranty.

This commercial air pump with 8 Outlets is perfect to run several waterfarms or multiple air stones at once. Electrical magnetic air compressor in a high quality aluminum alloy case, wear and tear resistant material for cylinder and piston. High pressure and high output, comes with multi-outlet divider. Super silent with multi-level muffler, low power consumption. Special artificial rubber to keep a steady air flow output and pressure that can be adjusted freely. 1-Year warranty. 60-Watts, 70-liter per minute, 120-voltage. 1100-GPH, maximum amperage is 0.5 and maximum decibels is 60. Measures 10-inch length by 5-2/7-inch width by 6-inch height. This product weighs is 5.8-pound.

CW-3000 Industrial Water Cooling Chiller for CO2 Laser Tube Engraver Cutting Cutter Item Info: This water chiller is designed for cooling the spindle of the cnc engraving machine, applied to cool a single 80W or below CO2 laser tube (emitting rate lower than 60%) This Water Chiller has been sold largely to Europe, South America, Asia and other markets. Economic cooling equipment, easy to install and operate, compact and easily movable Technical Datas: Voltage: AC 100-120V Frequency: 50Hz Current: 0. 45A Radiating capacity: 50W/℃ Tank capacity: 8L Maximum Pumping Lift: 10M Maximum Flow: 10L/min Protection: Flow alarm Inlet and outlet: External Dia. 10mm brass connector Way of Circulation: Water pump forces circulation Cooling: Radiator that forces the wind cooling Feature: Comprehensive reference to the international radiator – type cooling system Small thermolysis water cooler With completed water flow and over high temperature alarm functions Enclosed water tanks Professional forced air – cooled radiator Equipped with alarm output port Multiple power specifications; CE approval; RoHS approval Advantages: CW-3000 laser water chiller is suitable for small water cooling device Provide stable working conditions for laser devices Water can be used for a long time High heat dissipating capacity and not easy to be blocked Alarm output port can quickly protect sensitive components Package Content: 1 x CW3000 Water Chiller Machine 1 x Power Cable 1 x Spare Fuse 1 x User Manual 1 x Alarm Signal Output Plug 2 x Sealing Washer Note: This machine does not have a cooling function, only to heat dissipation

This Active Aqua submersible pumps designed specifically for hydroponic systems. Powerful mag drive construction, removable foam filters and impellers, included indoor/outdoor use. Oil free/environmentally safe. 1-year warranty. Recommended for 15-gallon reservoir. Easy open shroud for filter replacement. Rubber mounting feet reduce vibration. 6-foot heavy duty power cord. c-UL-us listed. 5⁄16-inch, 1/2-inch fitting. 8-Watts, 120-VAC, 10-liter per minute, 120-voltage. 160-GPH, maximum amperage is 0.12. This product weighs 1.4-pound. Measures 7-inch length by 2-5/7-inch width by 3-1/2-inch height.

Sized to fit each of our Active Aqua chillers, the kit includes two hose clamps, one replacement fuse and two rubber replacement collars for inlet/outlet fittings.

FREE SHIPPING UPS TO 48 STATES – Chiller Daddy is a high output, heavy duty under sink drinking water chiller for home or office. Great for use with a Reverse Osmosis RO System or under sink drinking water filter system. Easy to install. Whisper quiet 3-way noise suppression system. SUS304 Stainless Steel inside and out. Even the nuts, bolts, screws, washers, cabinet and drain cap are stainless steel. Premium quality in every detail. Chiller Daddy makes perfectly chilled water for big thirsts. Adjustable Water Thermostat 42F – 54F – Factory Preset For Normal Use – Perfectly Refreshing Drinking Water Temperature Range Hygenic Stainless Steel Cold Water Tank, Drain Cap & In/Out Tubes – 100% Stainless Steel Waterway males it the best choice for the high purity of reverse osmosis water Attractive Appliance Grade 304 Stainless Steel “NO-RUST” Exterior Cabinet Long Life, Hermetically Sealed, High Efficiency Compressor Auto Overload Protection – Thermally Protected Motor-Compressor Fast 1.32 GPH Flow Rate – Quick Recovery Dual Evaporator Grid For Silent and Efficient Convection Water Chilling. Conforms to UL Standard 399. Certified to CSA Standard C22.2 #s 60335-2-24 & 60335-1Easy to Install on RO Reverse Osmosis and Filtered Drinking Water Systems. Enough cold water to give you brain freeze on a hot day!

This Active Aqua submersible pumps designed specifically for hydroponic systems. Powerful mag drive construction, removable foam filters and impellers, included indoor/outdoor use. Oil free/environmentally safe. 1-year warranty. Recommended for 40-gallon reservoir. Easy open shroud for filter replacement. Rubber mounting feet reduce vibration. 6-Feet heavy duty power cord. c-UL-us listed. 3/8-inch fitting. 25-Watts, 120-VAC, 25-liter per minute, 120-voltage. 400-GPH, maximum amperage is 0.2. This product weighs 2.6-pound. Measures 8-2/5-inch length by 3-1/2-inch width by 5-4/5-inch height.

Four easy steps for healthier, cleaner water. Franke StillPure under sink complete filtration systems improve the taste, odor and color of water found in your home by removing harmful bacteria, parasites and cysts, chlorine and lead. Simply choose from the expansive line of Franke pre-configured water filtration kits or choose a-la-carte based on your specific needs. Select the Franke water filtration faucet to best match your style needs, add a filter kit, an optional chiller or heater tank and a monitor your usage (with Bluetooth FM100 and smartphone app) to ensure high quality water filtration at all times. For simplistic, minimalist design options, choose a Franke 3-in-1 faucet design to maximize functionality without the clutter of additional faucets. Instant heating and cooling features will help dramatically reduce the amount of waiting time to get your water to the desired temperature. All of Franke water filtration systems are designed to be conveniently installed under your sink for point of use, making adding filtration extremely simple. Additional water supply hoses may be needed to connect to the existing water supply lines. Franke water filtration products are backed by a 5 year warranty, faucets by a limited lifetime warranty, heater and chiller tanks by a 1 year warranty.

This commercial air pump with 8 Outlets is perfect to run several waterfarms or multiple air stones at once. Electrical magnetic air compressor in a high quality aluminum alloy case, wear and tear resistant material for cylinder and piston. High pressure and high output, comes with multi-outlet divider. Super silent with multi-level muffler, low power consumption. Special artificial rubber to keep a steady air flow output and pressure that can be adjusted freely. 1-Year warranty. 60-Watts, 70-liter per minute, 120-voltage. 1100-GPH, maximum amperage is 0.5 and maximum decibels is 60. Measures 10-inch length by 5-2/7-inch width by 6-inch height. This product weighs is 5.8-pound.

CW-3000 Industrial Water Cooling Chiller for CO2 Laser Tube Engraver Cutting Cutter Item Info: This water chiller is designed for cooling the spindle of the cnc engraving machine, applied to cool a single 80W or below CO2 laser tube (emitting rate lower than 60%) This Water Chiller has been sold largely to Europe, South America, Asia and other markets. Economic cooling equipment, easy to install and operate, compact and easily movable Technical Datas: Voltage: AC 100-120V Frequency: 50Hz Current: 0. 45A Radiating capacity: 50W/℃ Tank capacity: 8L Maximum Pumping Lift: 10M Maximum Flow: 10L/min Protection: Flow alarm Inlet and outlet: External Dia. 10mm brass connector Way of Circulation: Water pump forces circulation Cooling: Radiator that forces the wind cooling Feature: Comprehensive reference to the international radiator – type cooling system Small thermolysis water cooler With completed water flow and over high temperature alarm functions Enclosed water tanks Professional forced air – cooled radiator Equipped with alarm output port Multiple power specifications; CE approval; RoHS approval Advantages: CW-3000 laser water chiller is suitable for small water cooling device Provide stable working conditions for laser devices Water can be used for a long time High heat dissipating capacity and not easy to be blocked Alarm output port can quickly protect sensitive components Package Content: 1 x CW3000 Water Chiller Machine 1 x Power Cable 1 x Spare Fuse 1 x User Manual 1 x Alarm Signal Output Plug 2 x Sealing Washer Note: This machine does not have a cooling function, only to heat dissipation

This Active Aqua submersible pumps designed specifically for hydroponic systems. Powerful mag drive construction, removable foam filters and impellers, included indoor/outdoor use. Oil free/environmentally safe. 1-year warranty. Recommended for 15-gallon reservoir. Easy open shroud for filter replacement. Rubber mounting feet reduce vibration. 6-foot heavy duty power cord. c-UL-us listed. 5⁄16-inch, 1/2-inch fitting. 8-Watts, 120-VAC, 10-liter per minute, 120-voltage. 160-GPH, maximum amperage is 0.12. This product weighs 1.4-pound. Measures 7-inch length by 2-5/7-inch width by 3-1/2-inch height.