The Best 12 Volt Pc Cooling Pump

Specifications:
Material: PA66+Glass fiber
Power consumption: 4.2W
Rated voltage: 12V
Rated current: 0.35A
Max flow rate: 240L/H (63G/H)
Max static head: 3m (9.8ft)
Diameter of inlet: 8mm(0.31 inch thread)
Diameter of outlet: 8mm(0.31 inch thread)
Noise: Waterproof level: IP68
Lifespan: More than 30,000hrs
Power supply: DC electric source (bared wire)
Driving method: Brushless, Magnetic
Max working temperature: 60℃/140F
Item dimension: 51mm*34mm*42.7mm
Note:
1. Working at rated voltage (DC12V/0.35A). The positive pole is red wire, the negative pole is black wire/blue wire.
2. This pump is centrifugal pump, it can’t vent the air automatically, so it must be operated by submersible installation. (If outside water installation, you should make sure it is installed below the liquid surface)
3. When blocking, long-running is not allowed.
4. Preventing any hard particles entering the pumps.
How to Choose pump:
1. Make sure the working voltage, current, head and flow. The Max head means the static head. The pump can lift to the max height when there is no flow. If you want special flow at special height, you must choose more higher head than the height you want to pump;
2. Make sure the dimension (threaded interface or not, the direction and diameter of outlet and inlet);
3. Working environment (temperature and medium);
4. Other functional requirements, such as time control, motion control, pressure control, flow control, and speed adjustment.
Package includes:
1 * Water pump

Description:

– Model:SC-300T
– Flow:max 300L/h
– Head:max 1.9 meters
– Power Connector: Small 3P connector
– Voltage:DC12V
– Power: 4W
– Water tank capacity: 150ml
– Noise:23DB
– Dimensions:Length 66mm * wide 56mm * height 86mm (net size, excluding out of faucets, shock absorber)
– Tap Diameter:9.4 mm

Features:

– LED power indicator to indicate power-on state
– Control circuit,the pump is more stable
– Tap out the instructions marked
– Small 3P power connector can be directly plugged into the headboard fan original position
– Support speed testing function
– With rubber shock absorber base,ultra-quiet experience.（Tips:It is good to use the pipe with 8MM inner diameter）

Package included:

– 1pcs ultra-quiet Water pump

Specification:
Material: Acrylic + ABS
Model: PU-FS4-J
Rated current: 0.7A
Rated function: 8W
Pump head: 4 meters
Pump flow: 800L/H
Starting voltage: 7V
The highest voltage: 13.5V
No-load speed: 5000RPM
Load speed: 3000RPM
Size: Approx. 5.5 * 6.4 * 6.4 cm/ 2.2 * 2.5 * 2.5 in
Weight: about 285 g

Package list:
1 * Water Pump
1 * Rubber Mat

Important Tips:

Please add a filter to avod hair or dirts being clogged with in this pumps.
if our pump does not working properly, please try to open and clean it before sending back to us,thank you very much!

Specifications:

Material: PA66+Glass fiber
Power consumption: 4.2W
Rated voltage: 12V
Rated current: 0.35A
Max flow rate: 240L/H (63G/H)
Max static head: 3m (9.8ft)
Diameter of inlet: 8mm(0.31 inch thread)
Diameter of outlet: 8mm(0.31 inch thread)
Noise: Waterproof level: IP68
Lifespan: More than 30,000hrs
Power supply: DC electric source (bared wire)
Driving method: Brushless, Magnetic
Max working temperature: 60℃/140°F
Item dimension: 51mm*34mm*42.7mm

Note:

1. Working at rated voltage (DC12V/0.35A). The positive pole is red wire, the negative pole is black wire/blue wire.
2. This pump is centrifugal pump, it can’t vent the air automatically, so it must be operated by submersible installation. (If outside water installation, you should make sure it is installed below the liquid surface)
3. When blocking, long-running is not allowed.
4. Preventing any hard particles entering the pumps.
5. The Max head means the static head. The pump can lift to the max height when there is no flow. If you want special flow at special height, you must choose more higher head than the height you want to pump;

Specifications:
Material: PMMA + POM + Anode Aluminum
Color: Black + Transparency
Tank length: 110mm, 160mm, 210mm, 300mm (Optional)
Hole site: G1/4 Thread
Rated current: 0.8A
Rated power: 19W
Water pump flow: 800L/H
Starting voltage: 12V
Maximum voltage: 13.5V
Power interface: big 4pin, small 4pin
Overall Length: Approx. 19.5cm / 7.7in 
                                     or 24.5cm / 9.6in 
                                     or 29.5cm / 11.6in 
                                     or 38.5cm / 15.1in
Diameter: 5cm / 2.0in (top), 4cm / 1.6in(bottom)
Weight: Approx. 557-640g

Package List:
1 * Water Tank and Pump
2 * Plastic Buckle
2 * Metal Buckle
1 * Bag of Screw and Nut

Specification:
Type: Water Pump
Voltage: 12V DC, large 4P / small 3P plug
Current: 0.8A
Power: 10W
Lift: 4 meters
Flow rate: 500L/H
Material: Acrylic + Plastic
Thread: G1/4
Inlet and outlet: 1/4 internal thread, Thread Coupling is NOT included
Weight: Approx. 290g
Size: Approx. 5 * 5 * 7.8cm /  2 * 2 * 3.1in
Package size: Approx. 13.5 * 8.5 * 9.5cm / 5.3 * 3.3 * 3.7in

Package list:
1 * Water Pump

Note:
Please allow slight error due to manual measurement. Thanks for your kind understanding.

Features:

A kit of computer water cooling reservoir, consists of a main water reservoir, plastic brackets, L-type metal stand and screws kit. Effectively for heat reducing, maintain the proper temperature to keep the computer running well. Made of high-quality POM and PMMA material, shock, acid and alkali resistance, durable to use. Full open design, free to screw up and down. Noise reduction, work quietly and do not disturb you while you are working or studying on the computer.

Specifications:

Color: Transparent

Shape: Cylinder

Screw Thread: G1/4

Material: POM + PMMA

Interface Diameter: Approx. 12.9mm

Package Size: Approx. 20 * 14 * 7cm

Weight: 200g

Package List:

1 * Cylinder Water Reservoir

2 * Plastic Brackets

2 * L-Type Metal Stands

1 * Screws Kit

Features:
LED power indicator to indicate power-on state
Control circuit, the pump is more stable
Tap out the instructions marked
Small 3P power connector can be directly plugged into the headboard fan original position
Support speed testing function
With rubber shock absorber base, ultra-quiet experience.

Specification:
Model:SC-300T
Flow:max300L/h
Head:max1.9 meters
Power Connector:Small 3P connector
Voltage:DC12V
Power:4W
Water tank capacity:150ml
Noise:23DB
Dimensions:Length 66mm * wide 56mm * height 86mm (net size, excluding out of faucets, shock absorber)
Tap Diameter: 9.4 mm
Tips:It is good to use the pipe with 8MM inner diameter

Package included:
1pcs ultra-quiet Water pump

The aquastream ULTIMATE has been specifically designed for PC water cooling systems. Design goals such as high performance electronics, integrated fan controller, temperature sensor, OLED display and comprehensive control options were all met during development. And there is one other feature that should be mentioned here – the extremely low noise level of the pump. This pump features Intelligent pump controller for reduced vibrations and operating noise, High resolution OLED display and built-in buttons for direct operation without a PC, Integrated water temperature sensor, Steplessly adjustable 12 W fan output for analog 3-pin fans or 4-pin PWM fans, Automatic control of fan output and pump speed with individually adjustable behavior, aquasuite software for a comfortable setup, evaluation and visualization of all sensor data, aquabus interface for communication with Aqua Computer devices. (When connected to an aquaero, the fan output of the pump can be controlled from the aquaero), Connector for external temperature sensor, Connector for external flow sensor, Alarm output to protect the PC in case of a failure, Integrated buzzer for acoustic alarm, USB 2.0 interface, Firmware update via USB, 12 V power supply via SATA power connector.

Model: 41108