The Best 175 Hp Treadmill Motor Dc

SQ1102 SQ1102

We have noticed there are sellers on Amazon who have copied our description and sold a knock-off version of motor that resembles our product(s). Please be noted that products of Makermotor(TM) listed on Amazon are only sold through seller account of makermotor. We are not associated to the other Amazon sellers who have copied our description and we are not responsible for the poor quality and craftsmanship of their products.

The replacement 1.25 Total Horsepower (THP) swimming pool pump motor fits a wide variety of pool pumps including American Products, Pentair, Astral, Hayward, Jacuzzi and Jandy. Save yourself the time, headache, and hassle of re-plumbing and the expense of buying a whole new complete pump by replacing your old worn-out motor with a new THP replacement motor. The standard 56J-Frame, C-Flange motor features four 3/8-Inch threaded bolt-holes at 1, 5, 7 and 11 o’clock with a threaded motor shaft on the end. Each replacement motor is quality made, guaranteed to last, and covered by a full 1 year warranty. The new 1.25 Total Horsepower motor can be used to replace a 1-HP Up-Rated or 3/4-HP Full-Rated motor and is wired for 115/230 volts. It is highly recommended to replace pump seals, gaskets and lubricants when replacing your pump motor. US Motors Model: AST125.

– 3/8″ D Shaft of this unique 100 RPM gear motor means you can find a transmission to fit at ease.
– This motor is reversible by means of reverse polarity.

The timer & drive motor for the Fleck 5600 & 3200 control valves can quit working or wear down. This will cause the unit to stop backwashing and cleaning itself properly resulting in poor water quality. This replaces the Fleck part number 18743 which is a 120V – 60Hz – 1/30 RPM timer motor. This is also the replacement motor which is the timing and drive motor for the Fleck 9500, 9100, 9000, 2750, 2510, 2500. Please note, this is _NOT_ the 24v version which requires a transformer.

Pool motor, 50-Degree C ambient temperature, 303 stainless steel threaded shaft.

The AmpFlow E30-150 motor is designed to deliver good performance and efficiency at an economical price. This is achieved by the use of four brushes and advanced electromagnetic computer modeling and design. these motors are made from two sturdy aluminum castings and a seamless body. The E30-150 motor is 3. 1 inches in diameter and 4 inches long. The 1/2-inch diameter shaft is two inches long and it rides in two high-quality ball bearings. There is a short 3/8-inch diameter shaft on the rear of the motor for mounting an optical encoder. The heavy-gauge 12 AWG motor leads are 18 inches long. The motor weighs 3. 6 pounds and it is finished in a high-quality black powder-coat. this reversible motor can be used at voltages ranging from 12V to 36Vdc. At 24 Volts it has the following performance: the no-load speed is 5600 RPM. It develops a maximum of one horsepower and a maximum stall torque of 710 oz.-in. Peak efficiency of 76 percent is achieved while drawing 17 Amps at 5000 RPM. Power and torque at peak efficiency are 0. 4 horsepower and 85 oz.-in. this motor is also available with an optional gearhead. Search for “AmpFlow Gear motors”. The AmpFlow E30-150 motors are used in diverse applications including robots, industrial motion control, factory automation, semiconductor manufacturing, power tools, and electric bicycles.