Top 10 Diode Dynamics Hp 6 41Mm

Map lights, or the pair of lights above your front seats, use incandescent bulbs from the factory, giving them a yellowish color. By replacing these factory bulbs with LEDs, you can add a luxurious and modern look to your vehicle, with a cool white color, just like the map lights on newer luxury vehicles. The installation is 100% plug-and-play, just replace your factory bulb.

Sold as a pair. Prevents flickering and bulb out warnings after installing HIDs or LED bulbs Plug-and-play installation, no modification needed Fully waterproof and shockproof Engineered and manufactured in USA Overview No more errors or flickering. Diode Dynamics CAN-BUS Anti-Flicker modules are designed to condition factory power signals, both by smoothing out flickering signals to the output, and by replicating the power consumption of a halogen bulb, to avoid vehicle “bulb out” warnings that usually come with LED or HID power draws. It’s a redesigned, modern version of the old, generic “warning canceller.” It features nonpolar function, full power smoothing, and resistive and capacitive feedback to cancel even the most tricky CANBUS systems. Plug and play installation. Thanks to their nonpolar design, these units simply plug inline, either between the bulb and factory connector for LED bulb installation, or between the ballast and connector coming from the grommet for HID Conversion Kit installation. These modules can be used with 35W HID Conversion Kits or any LED bulb. It will prevent flickering or bulb out errors in low beams, high beams, fog lamps, or daytime running lights. The most common size used is 9006, which is the universal size for HID ballasts. However, you can select a different size as needed, for LED bulbs. This module is not recommended for use with 55W HID. Designed to handle even the most troublesome CANBUS systems, it has been tested for compatible with Ram, Dodge, Chrysler, Jeep, VW, BMW, Audi, Mercedes, and many other vehicles. Please note: Although we have tested these modules on many vehicles, due to differences in the electrical system on each vehicle, we cannot guarantee that these will correct any and every problem that may exist on every specific vehicle of every make and model.

This kit will make your LED tail light also function as the turn signal and is compatible with the Subaru WRX or STi 2015+. By eliminating the factory incandescent turn signal bulb, and instead operating it through your LED tail light, you will gain a much more modern appearance. Using OEM plug-and-play tail light connectors, the base kit is 100% plug-and-play, with no wiring required. You don’t even have to remove your tail lights! This product was designed and fully assembled by Diode Dynamics, in St. Louis, Missouri. It is fully made in USA. This product is designed to be used with Diode Dynamics products. Use of non Diode Dynamics products may result in improper function. Please note: For ease of installation, load resistors will be integrated into each module. This means you will not have to tap any factory wiring to eliminate hyperblinking, or change your flasher relay. If you do already have an LED flasher relay, you may continue using it with this product. If you wish, you can also convert the old turn signal socket to an extra high-mounted backup light! Each kit comes with the wires to accomplish this (see video for details) but you will need new white LED bulbs. You must use LEDs, not standard bulbs, because you will be drawing power from the backup light circuit.

Features

• Compatible with LED bulbs
• Prevents hyperflash errors
• Simple swap for original module
• Direct fitment and proper sizing

Flasher

Hyperblink Fix. Why do you need this module? When your factory turn signal bulbs go out, your vehicle’s flasher senses that less power is being used, and it will blink the turn signals quickly to alert you. Since LED bulbs use less power, you get the same fast blinking, known as “hyperblinking,” even though the LEDs are functioning just fine. Basically, your car thinks the bulbs went out!

To slow down the blinking to regular speed, you can add resistors to increase the circuit’s power consumption again. However, whenever possible, replacing the flasher with a module like this is the easiest option. Simply unplug your original flasher from under the dash, and swap it with this one to prevent hyperblinking.

Quality. The flashers distributed by Diode Dynamics are produced by industry leaders such as Novita. Watch out for generic cheap flashers, as many are slightly too large and may not fit properly in the socket.

Hyperblink Fix. Why do you need this module? When your factory turn signal bulbs go out, your vehicle’s flasher senses that less power is being used, and it will blink the turn signals quickly to alert you. Since LED bulbs use less power, you get the same fast blinking, known as hyperblinking, even though the LEDs are functioning just fine. Basically, your car thinks the bulbs went out! To slow down the blinking to regular speed, you can add resistors to increase the circuit’s power consumption again. However, whenever possible, replacing the flasher with a module like this is the easiest option. Simply unplug your original flasher from under the dash, and swap it with this one to prevent hyperblinking. Quality. The flashers distributed by Diode Dynamics are produced by industry leaders such as Novita. Watch out for generic cheap flashers, as many are slightly too large and may not fit properly in the socket. Features Compatible with LED bulbs Prevents hyperflash errors Simple swap for original module Direct fitment and proper sizing What’s Included In the Box: One LED-compatible flasher relay module Three-year replacement Quantity: One (1) : 3 year Return Policy: 30-day Return with no restocking fee 100 percent Satisfaction Fitment Plug and play, direct fitment in your vehicle Direct swap for your original flasher module Specifications Operating Voltage: 9-16V Operating Temperature: -40C to 85C (-40F to 185F) Connector(s): OEM-Size Plug and Play Weight (lb): 0. 1250

Features

• Converts your tail light to also function as the turn signal
• OEM tail light connectors for simple plug-and-play installation
• Assembled in USA

Overview

Custom Appearance. This kit is compatible with the Subaru Outback 2015+ and will convert the incandescent tail light to also function as the turn signal. This kit will instantly customize your vehicle for a much more modern appearance on the road!

Easy Installation. Using OEM tail light connectors, the base kit is 100% plug-and-play and installs in minutes, with no wiring required. You don’t even have to remove your tail lights!

Experience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we manufacture and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you’d like to discuss your lighting project!

What’s Included

• Two (2) modules compatible with 2015+ Subaru Outback
• One (1) Installation Guide

Features

• Adds unique, programmable functions
• Compatible with LED or standard bulbs, no hyperflash
• Plug and play swap for original module
• Assembled in USA, 3 year warranty

A Smarter Flasher

The SmartTap is a replacement turn signal flasher relay, compatible with any vehicle using a CF18 (LM449) Flasher. With plug-and-play installation, it offers a lot more than your average relay: an embedded microcontroller is loaded with exclusive software, which adds new features to your vehicle! You can program the features just the way you’d like, with the help of the included programming guide.

Tap-to-Signal: Anytime the turn signal is tapped, the turn signal will blink a number of times automatically. This one-touch signaling is a convenient way to signal other drivers when switching lanes. The number blinks is programmable, to make it as long or short as you’d like.

Unique Hazard Functions: The SmartTap has built-in strobe, slo-mo and wig-wag hazard functions to help your vehicle stand out when the hazards are on. Apply these functions on their own, together, or with the strobe setting for a total of eight unique hazard functions!

Arrival and Departure Modes: When the lock or unlock button is pressed, your turn signals will stay on in a steady glow, for better visibility when approaching or leaving the vehicle at night. The lighting time can be adjusted from 10-90 seconds for additional illumination, or disabled if desired. PLEASE NOTE: This feature is based on precise timing for the factory signals, and unfortunately is not compatible with every vehicle.

This product was designed, programmed, and assembled by Diode Dynamics, in St. Louis, Missouri, USA.

Features

• Compatible with LED bulbs
• Prevents hyperflash errors
• Simple swap for original module
• Direct fitment and proper sizing

Flasher

Hyperblink Fix. Why do you need this module? When your factory turn signal bulbs go out, your vehicle’s flasher senses that less power is being used, and it will blink the turn signals quickly to alert you. Since LED bulbs use less power, you get the same fast blinking, known as “hyperblinking,” even though the LEDs are functioning just fine. Basically, your car thinks the bulbs went out!

To slow down the blinking to regular speed, you can add resistors to increase the circuit’s power consumption again. However, whenever possible, replacing the flasher with a module like this is the easiest option. Simply unplug your original flasher from under the dash, and swap it with this one to prevent hyperblinking.

Quality. The flashers distributed by Diode Dynamics are produced by industry leaders such as Novita. Watch out for generic cheap flashers, as many are slightly too large and may not fit properly in the socket.

Features

• Compatible with LED bulbs
• Prevents hyperflash errors
• Simple swap for original module
• Direct fitment and proper sizing

Flasher

Hyperblink Fix. Why do you need this module? When your factory turn signal bulbs go out, your vehicle’s flasher senses that less power is being used, and it will blink the turn signals quickly to alert you. Since LED bulbs use less power, you get the same fast blinking, known as “hyperblinking,” even though the LEDs are functioning just fine. Basically, your car thinks the bulbs went out!

To slow down the blinking to regular speed, you can add resistors to increase the circuit’s power consumption again. However, whenever possible, replacing the flasher with a module like this is the easiest option. Simply unplug your original flasher from under the dash, and swap it with this one to prevent hyperblinking.

Quality. The flashers distributed by Diode Dynamics are produced by industry leaders such as Novita. Watch out for generic cheap flashers, as many are slightly too large and may not fit properly in the socket.