Finding your suitable readers for 1/2 hp convertible well jet pump is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for 1/2 hp convertible well jet pump including detail information and customer reviews. Let’s find out which is your favorite one.
980 reviews analysed
1. WAYNE CWS50 1/2 HP Cast Iron Convertible Well Jet Pump for Wells up to 90 ft.
Feature
- Assembled in the US with foreign and domestic parts.
- 1/2 hp
- max. Flow rate is 408 gallons per hour
- (50 psi)
- 3/4 in. Npt discharge with 1-1/4 in. Npt suction and 1 in. Drive
- Pressure switch is pre-set at 30-50 psi for automatic operation
- Jet assembly required (sold separately).
- Pumps up to 310-Gallon per hour
- Dual voltage (120-240-Volt) high efficiency square flanged motor is factory wired for 120-Volt.
- Dedicated priming port for volute filling
- Durable cast iron volute
- 3/4-Inch NPT discharge with 1-1/4-Inch discharge and 1-Inch drive
Description
Product Description
The Wayne CWS50 1/2-horsepower shallow well jet pump is for wells up to 90-feet deep. At 50 psi it pumps up to 310-gallon per hour at 5-feet depth.
From the Manufacturer
The Wayne CWS50 1/2-Horsepower shallow well jet pump is for wells up to 90-Feet deep. At 50 PSI it pumps up to 310-Gallon per hour at 5-Feet depth.
2. Goulds J5 Convertible Jet, Deep Well Pump – 115v/230v – 1/2 hp
Feature
- Convertible: May be used on shallow or deep well applications using appropriate Goulds Water Technology fittings. Serviceable Back pullout design for service without disturbing piping. Two compartment motor for access to wiring and replaceable components. UL778 listed Maximum temperature: 140°F
- Nozzle clean out plug in Shallow well adapter. Corrosion resistant, plastic tubing and fittings are easily removed for cleaning. Premium O-RING design fittings need only be hand tight to seal. Impeller: F. D. A. Compliant, glass filled Noryl. Corrosion and abrasion resistant.
- Diffuser (Guide vane): Bolt down Lexan diffuser has stainless wear ring for extended performance in abrasive conditions. Powered for Continuous Operation: Pump ratings are within the motor manufacturer’s recommended working limits. Can be operated continuously without damage.
- Corrosion resistant: electro-coat paint is baked on. Protected mechanical seal: diaphragm retains water in the casing to ensure the mechanical seal can never run dry. Excellent air handling ability: after initial priming the pump has the ability to re-prime itself. Pumps are manufacturer tested and may contain water inside from such testing applications specifically designed for: homes farms cottages
- Booster service specifications pump: pipe connections: 1¼” NPT suction, 1″ Npt discharge, 1″ Npt drive (pressure) Pressure switch: as4 preset at 30-50 PSI motor: NEMA standard 60 Hz 1/2 HP, 115/230 V capacitor start single phase 3500 RPM built-in overload with automatic reset stainless steel shaft rotation: Clockwise when viewed from motor end
Description
Impeller: F. D. A. compliant, glass filled Noryl. Corrosion and abrasion resistant. Diffuser (Guide vane): Bolt down Lexan diffuser has stainless wear ring for extended performance in abrasive conditions. Powered for Continuous Operation: Pump ratings are within the motor manufacturer’s recommended working limits. Can be operated continuously without damage. Corrosion Resistant: Electro-coat paint is baked on. Protected Mechanical Seal: Diaphragm retains water in the casing to ensure the mechanical seal can never run dry. Excellent Air Handling Ability: After initial priming the pump has the ability to re-prime itself. APPLICATIONS Specifically designed for: Homes Farms Cottages Booster service SPECIFICATIONS Pump: Pipe connections: 1¼” NPT suction, 1″ NPT discharge, 1″ NPT drive (pressure) Pressure switch: AS4 preset at 30-50 PSI Motor: NEMA standard 60 Hz 1/2 HP, 115/230 V capacitor start Single phase 3500 RPM Built-in overload with automatic reset Stainless steel shaft Rotation: clockwise when viewed from motor end UL778 listed Maximum temperature: 140°F Pressure regulator included. Pumps are manufacturer tested and may contain water inside from such testing
3. Acquaer 1/2 HP Dual-Voltage Durable Cast iron Convertible Deep WellJet Pump With Injector kit
Description
Acquaer CJE050-1 is a 1/2 HP convertible Jet Pump can be used as shallow well jet pump where depth of the well is 25 ft. and deep well jet pump where depth of well is 26-80 ft.. The pump can run at 115 or 230 volts with the quick change voltage selection switch, and the pressure switch is set to 30 psi on and 50 psi off for high-pressure delivery
4. Acquaer 1 Hp 11.5GPH Cast Iron Convertible Jet Pump
Description
Acquaer CJE100 is a 1 HP convertible Jet Pump can be used as shallow well jet pump where depth of the well is 25 ft. and deep well jet pump where depth of well is 26-80 ft.. The pump can run at 115 or 230 volts with the quick change voltage selection switch, and the pressure switch is set to 30 psi on and 50 psi off for high-pressure delivery
5. Acquaer SJC050 1/2 HP Dual-Voltage Cast Iron Shallow Well Jet Pump, Black
Description
Acquaer SJC050 is a 1/2 hp shallow well jet pump is designed for wells up to 25 ft. Deep. The pump can run at 115 or 230 Volts with the quick change voltage selection switch, and the pressure switch is set to 30 psi on and 50 psi off for high-pressure delivery.
6. Simer 3205C 1/2 HP Convertible Deep Well Jet Pump
Description
Product Description
1/2 HP Convertible Deep Well Jet Pump.
From the Manufacturer
1/2 HP Convertible Deep Well Jet Pump.
7. Flotec FP4012-10 1/2 HP Shallow Well Pump Jet
Feature
- Built-in shallow well pump jet ideal for wells with pumping levels of 25-Feet or less
- Offers superior performance at capacities to 10 GPM at 40 PSI
- Fiberglass-reinforced thermoplastic provides incredible corrosion and sandy water resistance
- dust-proof cover protects all electrical components from dust and insects
- Includes stainless steel shaft, heavy duty ball bearings, balanced rotor, mechanical shaft seal and insulated motor windings
- Measures 6.0-by-7.0-by-11-Inch (width by height by depth)
- weighs 26 Pound
Description
Product Description
Shallow well jet pump with built-in pressure switch. Superior performance at depths to water of 25′ or less. 1/2 HP pumps up to 8 GPM. 3/4 HP pumps up to 12 GPM. 1 HP pumps up to 18 GPM. Fiberglass-reinforced thermoplastic pump housing for the highest corrosion-resistance. Heavy-duty dual-voltage motor – 1/2 HP preset at 115V; 3/4 HP and 1 HP preset at 230V. Self-priming after pump housing is initially filled. CSA certified.
Amazon.com
This 1/2 HP, built-in shallow well pump jet from Flotec is ideal for wells with pumping levels of 25 feet or less. Featuring a corrosion-resistant nozzle and venturi, this model offers superior performance at capacities to 10 GPM at 40 PSI. It works by self-priming after the pump housing is initially filled with water. The fiberglass-reinforced thermoplastic construction provides incredible corrosion resistance, as well as resistance to sandy water. The dust-proof cover protects all electrical components from dust and insects, thus resulting in a longer-lasting motor. With a stainless steel shaft, heavy duty ball bearings, balanced rotor, mechanical shaft seal and insulated motor windings, the pump’s powerful motor delivers non-stop operation for years to come.
8. Star JHU10 1 HP Cast Iron Convertible Deep Well Jet Pump – Made in the USA
Feature
- Designed, machined, and assembled in the USA
- 1 HP convertible jet pump for deep well or shallow well applications
- Sturdy cast iron construction with highly serviceable NEMA J adaptable uni-frame motor
- Thermal overload protects against overheating
- Includes pressure switch, pump, motor, pressure regulator body, and flow control screw
Description
1 hp, deep well jet pump, cast iron, convertible, nema j adaptable uni-frame motor, features includes square-d pressure switch, thermal overload protects against over heating, 0′ at 40 psi = 1488 gph, 5′ at 40 psi = 1395 gph, 15′ at 40 psi = 1089 gph, 25′ at 40 psi = 690 gph, 60′ at 40 psi = 549 gph, 90′ at 40 psi = 306 gph, 110′ at 40 psi = 246 gph, ejector purchased separately.
9. Fe Myers HJ100D Deep Well Jet Pumps, 1 HP, Cast Iron
Feature
- Durable machined heavy-duty construction pump body provides long product life
- High quality proven pressure switch with adjustable on/off pressure settings. 20 PSI differential.
- Heavy-duty motor with double ball bearing design and voltage selection device
- Mechanical shaft seal with ceramic face and stainless steel construction for long seal life, Pressure regulator included.
- Pumps are manufacturer tested and may contain water inside from such testing
Conclusion
By our suggestions above, we hope that you can found 12 Hp Convertible Well Jet Pump for you.Please don’t forget to share your experience by comment in this post. Thank you!
